My 2016 f250 Lariat 6.2 4x4.. Question.. There's some sort of tapping noise that comes from underneath the under carriage like around exhaust area it seems.It's like a tapping sound the truck makes once its turned off. Does it about 6 times every 2 to 3 minutes.. Cant pin point the noise.
View 8 RepliesI have a 2004 F250 with 5.4 Triton engine. It stalls when tapping on Power steering reservoir! This is the oddest thing I've ever seen! I did not get time to look into it today but will sure do so tomorrow.
View 2 RepliesLike a lot of our trucks, mine had the tap-tap-tap cab noise while going over bumps. It always sounded like it was coming from the passenger side doors. I have read many solutions, but have never been able to solve my noise issue. But, I may have found it....or more truthfully, my wife.
The other weekend we were out running errands. As she climbed into the cab and shut the door she commented that the handle above the passenger door was getting real loose. She wiggled it to demonstrate.
Tap-tap-tap.
Same noise....... ....I'll be dipped.
Got home, grabbed a socket wrench and tightened the 2 screws. They were like 3 turns loose.
Noise seems to be gone. Time will tell, but if you have"that noise" check the upper passenger grab handle.
I just bought myself a 2003 F250 XLT with the V10 in it. Low miles, not beat, 6 speed, very happy with it. I noticed today that there was an inconsistent tapping coming from the passenger side valve cover. I searched online and was pointed towards the PCV baffle. I pulled the breather hose off and stuck my finger in the hole, and the baffle is indeed detached. Now I know that I need to pull the valve cover now to at least remove the baffle; is there anyway to reattach the baffle, or do I need to buy a new valve cover?
View 8 RepliesMy truck doesn't want to go grab parking!! The shifter has a lot of play, Every time I go to park my truck I have to forcefully hold the shifter up into parking so it can grab. I had times when the shifter its in parking and it will still move, like I've gotten out and pushed it and it moves.
View 1 RepliesI have a 2002 F350 Triton V10, Automatic 4x4 Lariat. I have a tapping noise in my motor, and I've had people tell me it could be the timing chain slapping around, a rod or lifter. The tapping noise gets quieter after the motor has warmed up, but gets louder when given gas. I've been told to try thicker oil, pure gasoline (no ethanol), The truck runs fine for the most part except for a vacuum leak on the top part of the motor underneath the throttle body. I have someone that says they can work on the motor and so on. But I don't know where to look to buy the parts for the motor, and what I should have replaced, while he's got the motor out and apart, so far he said he'd change the lifters, timing chain, the vacuum leak.
View 4 RepliesHow do I adjust the parking brake on my 08 F250? It's not holding when my truck is parked on a hill.
View 1 RepliesI have a f250 super duty. I blew a brake line the main going to the rear. So the genius that I am I replaced the line an simple enough I decide hell why not replace the master cylinder too, so I did an I bleed the brakes an everything works jst fine but now the the brake light won't turn off I have tried everything not sure what could possibly cause the light to stay on. I will eliminate some suggestions, I bleed the brakes, the brake fluid is full, the level sensor is completely attached, the parking brake is not on, I pulled the parking brake completely out, even completely disconnected the sensor thinking it would turn off bu it didn't.
View 1 RepliesParking brake light stays doesn't come on when the parking brake is engaged. The light DOES come on when starting the vehicle and the gauge cluster cycles through its start up procedure. Couldn't find a fuse that would fix my issue...does one exist?
Truck is an '02 F250 w/ 7.3TD and 6 speed manual.
I'm re-doing the parking brake as part of a rear brake job on my 2009 F250. I need to disconnect the intermediate brake cable at the equalizer, but am having trouble. I've got slack in the cable, but can't push hard enough to get the swaged cable end to move within the connector that's between the equalizer cable and the intermediate cable.
Is there a special tool or some trick to this? If push comes to shove, I can cut the connector (assuming I can get a replacement), but would rather not.
Also, any particular trick to disconnecting the cable to the parking brake lever at the wheel? With that huge spring between the cable bracket and the end of the lever, I haven't been able to move the cable end enough to disconnect it from the lever. Since I don't have the intermediate cable disconnected, could that have something to do with it?
When I hook a trailer to my '04 F-250 the parking lights stay on. The lights on the truck are not on. I pulled the fuse for the towing lights and they will go out. Pulled what I believe to be the relay according to the owners manual and they still stay on. I have to unplug the trailer every time I stop for any period of time.
View 3 RepliesMy 2011 F250 has no front or rear running lights working, mirror side marker lights not working and fog lights not working. I have checked all fuses including 30amp trailer light fuse and they are good. The fuses in the passenger kick panel are not getting energized.
I replaced the switch with a friends from same truck and no luck there. The headlights, dash lights and turn signals work fine. Here's the kicker, when I back feed 12V to the yellow/blue wire at front running light it turns them all on, including mirror lights. I've switched out relays in the box under hood and that didn't work.
When I pull the switch on dash to turn on the fog lights the indicator in the switch doesn't work either, they are both listed on the same fuse but as I said, the fuses have continuity across the blades but when I test the socket there is no voltage going to them. I have not connected a trailer to see if those are out yet but will do today.
2000 F-250 Super Duty
I was replacing my headlights, which required me to splice in their lights to my parking lights, and I seem to have shutdown ALL my parking lights. I did a test after twisting my wires together and everything worked fine. Then I soldered and heat shrunk them and somewhere during that process I lost all the parking lights.
I checked the 8th fuse as per the manual (for Parking Lamps) with a multimeter and it checked out just fine.
Figured it was the time to ask the experts on here where I should go from here. Are there some other fuses I could be missing, or maybe some else I could do?
Solved: Bad fuse in the #8 slot in the Power Distribution Box (under the hood, near Cab, driver's side)...
I have a 2002 f250 SD v10 4x4. I had a ground wire break fixed that know noon of my instruments work. Dash lights up but nothing moves. Pulse my parking lights stay on when the truck is shut off or when I turn lights on then off. I have to disconnect the battery to get hem to shut off.
View 3 RepliesParking brake lever for the park brake on my 2001 F250 srw. Both are rusted up but im having trouble finding the part.
View 1 RepliesThe problem is I haven't seen one for a recent (2011+) SD. I don't see anything that resembles a rear drum. They look like 2 huge regular disc brakes.
I live on a hill. My old man taught me to put the trans in neutral, autos and manuals, put the ebrake on and make sure it holds the vehicle, then put the trans into park or 1st gear. This way the weight of the vehicle doesn't rest on the transmission.
How do I adjust the Ebrake? It's ALMOST holding the truck, just needs a minor tweak. I don't see the dust cover the write ups described at all. The one that reveals the Star Wheel. Are they different on these years then prior SD's?
2001 f250 7.3L......
Haven't had it long, but when I am in gear and come to a stop i hear/feel this sound coming from what seems to be under my feet. I don't know how else to describe it other than it sounds like a woodpecker is tapping on the floor.
If I put it in neutral it stops. As soon as i let off the brake it stops. It doesn't do it while driving.
I own a 2003 f250 superduty v8 gas. I have a buzzing noise that comes and goes. It comes from the dashboard area around the steering column. However it goes away when either I press on the brakes, hit the signal or press my tow brake control.. And I could go days and not here it then it will be there for a few days and then it goes away again...
View 7 RepliesI have a 2004 f250 with some front end troubles. When turning right once in a while it will make a hard CLUNK noise and then trying to drive down the street it drifts over to the left and I pull the wheel back to the right and when I turn the wheel it feels like I like theres something hitting somthing else in the front end. I have checked ball joints and tie rods and they are all nice and tight. Some stuff I have done that probably isn't related to my problem is shocks and sway bar end links. What this could be? Hopefully not the steering box!
View 7 RepliesI purchased an 1999 F250 Super Duty truck last Sept., it ran great all winter, now when I accelerate I notice a whining type noise (that's the only way I can describe it) it only does this during acceleration not @ idle, could this be a bad water pump? However there are no leaks or puddles of anything in my driveway.
View 2 RepliesI just bought a 2009 F250, I am getting a wind noise that I can't figure out where it is coming from. It only happens when I'm going at least 70 and into the wind. It is a short flute sounding noise that is intermittent.
View 6 Replies