I have a 1999 ford f250 superduty extended cab and am trying to find possible subwoofer locations (not wanting to lose floor space) but I can't find any pre-made boxes. Any pictures I can use as reference. Really wanting to install subwoofers. What can I do?
View 10 RepliesTrying to find ground wire location on my 99 f250 super duty with the 5.4 triton I didn't unbolt it myself. Going to be doing the big 3 upgrade soon and would like to use the factory ground spots.
View 13 RepliesMy 2005 F250 started stuttering, lurching, having wild swings in rpms, nearly dying at stop signs, no pickup when stepping on the gas, then taking off like a bat outta hell. After reading many, many posts here and on other sites, I have concluded that the most likely culprit is the ICP sensor, so I picked one up today (along with a EBP sensor - another story). It appears from the many posts that I have read that Ford/Navistar have frequently changed the location of these sensors. My question is: Where are the ICP and EBP sensors located on the 2005s (actual manufacture date is 07/2004)?
View 6 RepliesI have a 2005 f250 with a 5.4l 3v. Where the pcv valve is located is it in the valve cover or attached to the intake and what does it look like? I have pulled the hoses off both sides but I have not found it let.
View 3 RepliesWhere to find the PCM 4 digit code on 2001 F250 superduty/v10- Lariat?
View 3 RepliesWhere is the SYNC module in an '11 F250?
View 3 Replies2006 F-250 'family Cadillac' ... Where exactly is the door buzzer? I am looking all around under the dash but can't find it. I want to disconnect it.
View 13 RepliesWhere this box is located?
View 1 Replies2009 F250 Super Duty 4X4 auto lock hubs not working. Indicator lights on dash come on but will only go into 4 wheel drive when hubs are locked manually. Vacuum is present at lower of the two vacuum lines when engine is running. I attach the lower line to the module, rotate switch to 4X4 high or low and module doesn't allow vacuum to reach upper nipple. Which fuse operates this module?
View 3 RepliesI am trying to diagnose my fuel system, but I cant seem to find the fuel pump relay. My truck is an 2004 f250 crew cab work truck with 5.4L. it seems that the relay can be mounted anywhere from behind the radio or in the engine compartment as well as built in to the fuse box under the steering wheel.
View 14 RepliesI have a 2006 F250 Super Duty w/ turbo Diesel. Took to dealership for "hopping" feeling when turning sharp. Was told that 4 wheel drive solenoid was bad. Where this solenoid is located? I know I can fix but want to know where it is located.
View 6 RepliesI have noticed my trans temp gauge needle is dead center of the gauge even on a cold start. I thought my sensor was under the pan so I pulled it and did not see any sensor at all. Is there a external sensor?
View 5 RepliesI have a 2002 F-250 Super Duty 4X4 triton V-10. Where the security control module is located? my keyless remote system does not work even after programming a new remote. The Ford dealership charged me an hour labor to diagnose the problem and they said it's the security control module which I just ordered.
View 14 RepliesExactly where that part is, pictures would be useful. Pretty much just had my whole dash apart with no luck. Switched to leds, and can't stand hyper flash like I thought I could. Trying to pull it to make sure I order the right part to correct it.
View 11 RepliesThe #8 fuse under the hood was blowing on my '00 F-250 every time I turned on the healights meaning I would lose power to my park lights. The brown wire coming from the back of the headlight switch showed a dead short to ground that I traced to somewhere between the switch and the firewall.
Anyway, I got tired of trying to pinpoint the ground fault, so I cut the brown wires at the back of the switch and under the hood at the top bolt-on electrical plug and replaced the bad section with a new wire. It works fine now with the only exception being I do not get the park light flash when I hit the remote lock button the second time. I do still get the horn chirp.
My Haynes manual indicates there should be a relay box with a Park Lamp relay, Driver Unlock relay, All Lock Relay, and All Unlock relay. The park light relay looks like it sends the blip of power to the park light circuit. Where this relay box is? I'd like to splice into the brown wir coming out of it to restore the light flash when I lock the truck since sometimes it's too noisy to hear the horn.
Looking for where the fuel pump relay is 2001 f 250 SD reg cab 2 wd. Won't Start On pump gas , starting fluid yes
View 1 RepliesHow do connect the oem subs on my 08 350 with an after market audio system which has an RCA line dedicated for subs? What are sub wire colors behind the dash?
View 3 RepliesIts it true, that the fuel pump relay is hid in the fuse and relay box, and non serviceable ?
View 6 RepliesMy blower works half of the time...from what I have researched it is more than likely the resistor. The thing is I can't find it..all the videos and pictures looks like they are the **** control control. Where this is located for the dual climate control?
View 3 RepliesI have a 1999 f-250 sd 4x4 that had a 5.4L auto trans and a switch operated transfer case. Im installing a 1998 12v Cummins, nv4500 5 speed, and dodge manual shift transfer case. My father and I have made engine mounts, modified trans cross member, and installed a 1/2 " dip tube into fuel tank an used 1/2" fuel line to connect to factory Cummins fuel line. We are now to the worst part now "WIRING". I still have the OEM gasser 5.4 wiring harness. I bought bushings to install ford coolant temp probe and ford oil pressured sensor. I got my harmonic balancer machined with 2 more notches for ford cam/crank sensor pickups but I'm just confused after reading a few different postings about tach. I guess just need a run down on the 12v wiring to the 5.4 pcm. I would like all factory dash gauges to work right, cruise control, and A/C to work. My 12v still has dodge alt and dodge a/c compressor. I ve bought a bunch of parts so after you post to this ill let you know if I have it or not. Things like ford clutch and brake pedal sets, ford OEM manual transfer case shifter setup, bushings for ford sensors to Cummins, and other things I've forgot about.
View 6 RepliesI am going to be installing puddle lights to light up my step bars and I am looking to find out which wire to tie into? I was going to tie into the dome light circuit (blk/blue) so they would come on with keyless entry door unlock, but my dome light won't come on. So I either have to figure that out or go to plan B and find a difference source. Adding lights down there and found another way to power these? I don't know if extended cabs ever had the option for lighted running boards, maybe there is a dedicated wire somewhere? I don't want them on all the time, only when the truck is unlocked to light the step.
View 12 Replies