Ford Super Duty (1999-2016) :: Coolant Leak Coming From Metal Housing Behind Alternator
Jan 20, 2014
I trying to see if this is something that is a easy fix or mayor work. Leak coming from that metal housing behind alternator. Does this housing came off? or do I need to take out the intake out? .
View 8 Replies
Advertisement
I have a 2006 f250 6.0l diesel. I just replaced the egr valve plus egr cooler and I was going to flush the coolant. I was filling the truck with distilled water to do the flush when I noticed a leak under the truck. When looked to see where it was coming from it looks like it's coming from where the cylinder head meets the block on both sides in the back by the transmission. Is this a sign that the head gaskets are shot or did I forgot to tighten a hose or something stupid like that?
View 2 Replies
I noticed an oil leak out of the front housing of my 2016 350. I have 3 Ford dealers nearby and all 3 can't get me in until 8 August. It looks to be just a few drops daily. Is it safe to drive pulling a 5th wheel until they get me in? The leak is at the bottom of the housing.
View 3 Replies
Noticed a small oil spot on my drive way where i park my truck the other day. Got up underneath and saw it was leaking from a rectangular rubber grommet on the front of the transmission bell housing.
What could be causing this? Have heard a few different things, turbo line leak, turbo pedistals, HPOP leak. Seeing what Super Duty Nation thought of the problem. Going to the dealer sometime this week.
View 1 Replies
I just recently had to replace the extension housing on my truck. Well after doing so I went to start it up and top off the tranny fluid and it started to leak out on the left rear side of the transmission near the extension housing. Ive looked and looked and found that the fluid is coming from the top right in front of the extension housing but when i clean it off there seams to be no holes or cracks. It isn't the housing seal, cause it pools in front of that. What could be the issue? My truck is a 01 F250 4X4 5.4L.
View 4 Replies
So I was going to get the truck washed, but 2 blocks down the road smoke out of the engine bay.
Pulled over popped the hood and the alternator is on fire. Extinguished it self out but the burnt electrical smell.....sheesh..
Anyways, could I potentially drive the truck to the dealer, or will it catch on fire again????
View 11 Replies
I thought i heard this yesterday when i left work but i was tired and said its in my head, THEN i go to leave right now and sure enough its a real sound, you can hear it very well through the front grill and then if you turn the volume up you can hear a ticking sound ever half a second or so, it also speeds up when i was pulling on the throttle cable. And after the truck fully warms up it goes away.......
View 14 Replies
What we have is a 2011 F-350 with the ambulance package (obviously) and it has started making a very annoying sound from the front end. It has been into two different Ford Dealerships and they have not been able to remedy this issue. What happens is, when we are backing and turning, the front end makes a bad metal on metal grinding noise. When going straight down the road no issue just turning while backing. I know this is an ambulance and has the ambulance package but I think from the cab forward should just be all ford right?
View 2 Replies
I bought this truck used several months back and have ran it extremely hard. It's supposedly studded and EGR deleted. The whole engine was replaced at 183,xxx by some diesel place. Anyways, while I was driving I smelled coolant and thought that was funny so I ignored it. Anyways, My livewire tuner started seeing a coolant and engine oil increase. I figured I'd go ahead and drive it home. It got to 153 F* and the coolant was around 129 F* The oil cooler has been clogging up and I just got my brand new Ford one in.
So that will be replaced sooner rather than later. When I got home, I checked the coolant level and there was nothing in it!! It was pretty much empty. So I put the water hose on it and turned the water on and after about 2 mins steam started coming out near the turbo. I mean a crapload of steam. I turned the water on again and saw that it was coming out right next to the EGR delete. It's hard to tell exactly but looks like the intake manifold??? What could it be? It's not the hose for the EGR. The degas bottle has never overflowed, there's no white smoke except on cold starts in really cold temps.
View 1 Replies
Just last night, out of the blue, I've got an odd rumble at idle. The noise goes away under load and any time the rpm's are up over ~1300. It sounds like metal on metal vibration, but I don't see any loose exhaust parts.
I've looked at threads saying possibly a broken flex plate. Other than the noise, would there be any other symptoms? I don't notice any loss of power. I suppose I could pull the inspection cover and take a look, but I don't have any experience with auto tranny's and don't really know what I'm looking for.
View 1 Replies
Alright, after finally fixing my 4X4 issues, now I have a coolant leak. It's on the passenger side, just above the exhaust downpipe. I can't find any leaks in the hoses, and as far as I can see it looks like it's coming out of the back of the head and running down the back of the block. The odd thing is there's no oil in it, and no coolant in my oil (which obviously is a good thing), but I don't want it to get to that point of it is getting worse. Heat works fine, and it isn't overheating, only losing maybe a gallon a month. At some point the ford gold stuff was flushed and it has the compatible green, that is the only thing I can tell is not stock. I don't want to tear it down if I don't absolutely have to.
View 7 Replies
I have a loose, binding, metal on metal sound on my steering wheel shaft. I have removed the steering wheel, replaced the clockspring, because when I removed wheel clockspring was in pieces and I thought that might be the issue. Guess not, because I'm still having problem. Other than having to remove or replace the whole steering column...
View 2 Replies
About a week ago I began smelling coolant after driving my 2012 F350 6.7. Yesterday I noticed a small amount of coolant on the ground and decided to take it to the dealer. As soon as I told the Service Manager what was going on he said......"You need to leave it......there is no doubt in my mind it needs a radiator". They pressure tested and and sure enough it does. He said they are replacing about 2-3 a month but there is no recall.
Here is where it gets fun. Apparently radiators fall off at 36,000 miles and are not included in the 100,000 Power Train Warranty. It gets better. The Radiator is on national back order for 5-6 weeks.
View 14 Replies
03 f350 5.4. Very minor coolant leak at the moment. Valley behind water pump looks a little damp and leak has shown a little on the passenger side block above the starter. Shows on the tranny bell housing and hits the y pipe every once and a while. I am thinking its the hose that runs under the intake manifold but wanted to check in here for some wisdom. Can it be bypassed or rerun without pulling everything.
View 12 Replies
I have a 2006 Ford F-250 coolant leak only when the truck is cold. Ive noticed it in the morning when I leaving for work. It looked liked it was coming from the passenger side yesterday and today it's on the drivers side when I'm sure is because my driveway has a small tilt to it I've looked everywhere I could under the hood and don't see it leaking.
I don't have any temp problems or white smoke and my coolant level has changed that much and for a few days the drip stopped now it's back. I tried to search for the answer but can't find it. I'm just wanted to make sure it's not the head gasket but I'm sure I would have a sign it it was. I will include where I saw it dripping from. It's parked on flat ground here ... That's where I saw a drip coming from driver side ....
View 7 Replies
The wife and I were driving back to Sacramento yesterday. It was pretty hot around 95 when we left Stonyford, CA after a day of trail riding with our dirt bikes. From the staging area to the freeway, the distance was about 40 miles of slow twisty roads. We average around 30-45 miles per hour with full AC running. Once we got to the freeway and drove about 20 miles, we pulled to a McDonalds at which point I noticed a weird smell and smoke coming from under the hood. We opened the hood and notices smoke coming from the middle of the engine. I also noticed coolant leaking from under the engine. I waited an hour and then pour about 3 gallons of concentrate coolant back into the system. It seems to stopped leaking. We drove another 45 miles to home. Coolant hasn't leaked. I can't take this truck out until I figure this out and fix it.
View 8 Replies
I have a leak from the oil pan gasket and oil coolant lines. From the research I have done, it looks like I have to lift the motor to change the oil pan gasket. Any way to get this done without lifting the motor??? 2000 f250 5.4 2wd....
View 4 Replies
I'm trying to troubleshoot a leak on my 08' F250 with a 6.4 powerstroke. It's been dripping coolant when cold pretty aggressively. Once the truck heats up, the coolant leak seems to mostly go away.
Here's a picture of the drip, it's marked by a dart, so you can see the location from the top (second pic). The radiator house connection around the engine seems dry.
Pic from Top ....
What's hidden here that could be causing the leak?
View 1 Replies
I have been having non-stop issues with my tranny. After getting it rebuilt (by some BS shop my warranty company told me to go to) it is starting to leak when parked for more than a day. It generally pisses out about 1/2 to 1 qt overnight when this happens. I crawled under the truck and it looked like the fluid was coming from the pan gasket. Rather than taking it back to the mechanic that decided to take 3 months to fix it last time, I swapped out the gasket myself. This did not solve the problem. Where and why else could it be leaking from? It is not over filled, I have checked multiple times. I would prefer not to have to hand my truck back over to the incompetent 'mechanic' that 'fixed' it last time.
View 14 Replies
I have a leak where my heater core tube goes into the intake at the rear pass side of engine. I have read that this part is pressed in. I dont want to remove the intake since i just paid $400 to have a new gasket kit put on. My question is can I bypass this tube with a hose from the water pump like in this video?
FORD 4.6 , 5.4 , 6.8, HEATER HOSE UNDER INTAKE REPLACEMENT THE EASY WAY !!! - YouTube....
If I can do a rubber hose like in the video I was to make sure that the tube just goes through the intake and that it does not supple coolant into the intake??
View 13 Replies
I have a coolant leak coming from I am assuming the thermostat housing or thermostat. My question is, is there a gasket behind this that I am assuming is bad or is the thermostat bad.
View 6 Replies