I'm really not satisfied with my Ford F350 SDC headlight bulbs!! I need a BRIGHTER bulb suggestion that won't break the bank and not have to add ballasts and rewire the circuit...
View 11 Replies2013 F350 passenger headlight bulb keeps blowing both high and low? Replaced 2 times now?
View 1 RepliesI went to replace a headlight bulb and now I lost electric in the cab. I have no interior lights, no power window or door locks, turn the key on, no crank, no cluster, no radio, no chimes, the upfitter switches work, the mirrors power fold and telescope. Have power to both fuse boxes and battery is fully charged.
View 6 RepliesI have a 2004 F-350 V8. The bed has been removed and it has a small dump body. This is the problem that just randomly started with my lights:
The headlights, dome lights, and tail light illuminate - the rear lights do not illuminate when the headlight switch is on. Otherwise, the brake lights work, the reverse lights work, the four ways work, and the turn signals work.
I checked the ground and believe it to be okay - What am I missing and where do I start?
Using LED replacement bulbs? I have a 2008 super duty. Want to upgrade lighting.
View 14 RepliesA cab light (OEM) has burned out. I'd like to replace it. What style/part number bulbs are used?
The closest tangential reference I can find is to 194, with additional references to 168 and 912. A Google Image Search of makes it seem like I'm getting warmer.
A week ago last Saturday I bought a 2006 F250 Lariat Crew Cab with the 6.0 and 4WD. The truck is really clean and only has 68,000 miles on it. Here's my question: I needed to tow a boat today and I discovered I have no power, at all, at the trailer light plug receptacle. Nothing at the 7-pin nor the flat-4. I looked through the manual and checked every fuse that had the word trailer associated with it and I can also feel the turn signal relays clicking with the flashers on.
Am I missing something really simple or do I just need to follow the wire harness from the back and look for something that is not connected? It seems kind of weird for it to be just....dead.
I have searched everywhere, but I can't find the information I need for anything newer than 2007. I have the instrument cluster removed, and I can't figure out how to get to the bulb. In previous years, it just twisted out, but this one is different.
View 7 RepliesHow to change my map light bulbs over the front seat of my new (to me) 2010 F250 King Ranch with a sunroof. I have tried to remove the whole assembly with a plastic trim tool with no success. I have pulled as hard as I dare and figure there must be a procedure I am missing. It appears to me that the whole assembly has to be pulled down.
View 6 RepliesThe battery light blinks in my truck. It's not a controlled blink, but it flickers like a loose bulb. It started a week or so ago. It would blip every once in a while. Gradually it would start to flicker more often. At first I thought it was belt-related but it isn't related to the transmission shifting at all. So if you're thinking that it's belt-related, you're going to have to explain why it doesn't blink either right before or right after a transmission shift (i.e. a rapid change in engine speed).
Earlier in the week, the light was flickering so hard that it was virtually on. I drove home last night and didn't see it once, although that's the first time I haven't seen it happen at all in a week. The battery gauge itself doesn't move a bit while this is happening. I have a cigarette lighter voltmeter and it shows a pretty steady 14.1 volts regardless of whether the light is flickering or not.
I had the batteries tested in my truck by a real battery shop about 4 months ago and they are fine. The battery connections all seem tight and clean, and the belt, tensioner and all that seems fine. So..What can cause a battery light to come on that isn't voltage related?
02 f250 SD...I need to change the front corner turn signal bulb... How the hell do I get to it? I see the grey plug that I need to take off in between the bottom of the light and bumper but have no clue how to get to it..and what is the bulb number?
View 8 RepliesThis has been really getting at me for a while, I have one headlight that is brighter than the other, a tail light that is brighter then the other, and both fog lights are out. It's been like that since I bought the truck a few months back, I checked the fuse for the fogs and I changed all the lights.
View 5 RepliesThis has been a problem for awhile, my pass. side headlight has gotten really dim and as a result the driver headlight has gotten really bright. I cleaned the connector up as it had some white corrosion on it but it didn't seem to work. I can move it sometimes and it will come back bright but it doesn't last long. So the question is can I do anything with what I have or do I need a new connector or pigtail?
View 7 RepliesIs there a way to change the bulb without removing the grill and headlight? Seems like a lot of work to replace a bulb. 2013 F350....
View 3 RepliesI found one thread in FTE regarding replacing instrument cluster bulbs but the solution was to contact Circuit Board Medics. I have one dark area on the right side of the tach and another dark area on the left side of the speedo. Probably the same bulb that's out. Also, can attempt to replace the bulbs (assuming its a bulb and not a fiber optic of some sort) in the steering wheel volume and fan controls?
View 3 RepliesHow to remove the orange cover to replace the bulb in the driver side mirror - tried but worried I'm going to break it...
View 2 Replies01 Superduty headlight burnt out. Its a sealed beam, haven't changed one of those for years. Most are bulbs.
Anyway I took all the screws I could see from around the headlight door and underneath it.
Headlights still in there as solid as when I started. What screws I seem to be missing?
Got a little wild while i was in the trails the other day and was bouncing pretty hard and my headlight blew. Well now im on my third one and id suspect a short. This time it blew the bulb right apart so it must have got pretty hot. Any common problem areas i should look into before trying to figure this out?
View 2 RepliesI dont want to pry on the wrong thing and brake something. I am trying to remove the headlight. I was told that their are some pins that need to be pulled up. I dont see any pins. I do see two plastic clips on each side of the headlight. They are flat on the top with a small slot in them. There is a "T" stamped on the top of it. Are these the pins? I tried to find a shop manual today without much luck. Looking for a picture to show the pins that need to be removed.
View 7 RepliesI just had my pass side head lite burn out.....or at least I thought? I replaced the bulb twice......not touching either 1 with my fingures.......and I have no low beam on that side? Only hi beam on the pass side? All my fuses are good, and I even unhooked all my plow harness.
View 4 RepliesI have a 01 - F350 with the old nasty yellowing headlights. I know you can polish them or whatever but would like to just put the clear style like some of the newer 04 or up has. I have been doing some searches on here but have not found the answer or part #, brand, picture of the replacement headlight. Is there an easy way to do this without splicing harness, adding relays,ect ?
View 14 Replies