Ford Super Duty (1999-2016) :: Body Mount Bushings Shredded On Driver Side?
Mar 19, 2013
Need recommendation for replacement body mount bushing. Surprised to see the drivers side shredded. Poly replacement?
View 14 RepliesNeed recommendation for replacement body mount bushing. Surprised to see the drivers side shredded. Poly replacement?
View 14 Repliesi have a 2008 f250 4x4 i need to replace the drive side front lower body bushing and i can not get the pressed on bushing to come out what is the easiest way to get this to come apart i tried using a 4 ft pry bar and i could not get it to pop free.
View 11 RepliesThe driver side front body mount bushing on my 2014 is gone which has the grill sitting on the bumper. I started to replace it, but the bolt is sized to the nut. ran off about 1/2 inch and that is it, it will not tighten or loosen anymore.
I cut the head off the bolt, but can not get the body high enough to remove the old bushing so i can cut the nut off flush with the rad support. Now I am trying to get the air filter box out so i can cut the top of the "nut cage" off to remove the bolt and nut out the top. but i can not figure out how it is held in.
I have the intake disconnected and the filter hat off, overflow tank hose disconnected, and two bolts holding the whole thing to the fender out, but it will still not budge. What am I missing here?
Mounting a side mount tool box without drilling into the bed floor for the support legs? There are "J" hooks for the rails but there are legs that are supposed to be drilled into the floor.
View 2 RepliesI've got this clunky sound I am narrowing down to the drivers side body mount. The stock one has lasted 11 years. But I'm reading thread after thread about stock replacements lasting a year or so before crapping out again. I've found a few people mention the energy suspension lot, or another one that has Kevlar (daystar iirc). I googled them and found a handful of super duty owners who used the poly mounts complaining about harshness and vibration transmitted to the cab.
My truck is my dd and with my new highway tires and stock exhaust it's as quiet as it ever has been and that makes me and the family happy on long trips. I don't want to do anything to ruin that.
I have a 2002 F350 4x4 CC 7.3 i am wanting to change the sway bar bushings front and rear to poly and I want greasable bushings to avoid the squeaking that you get with these bushings alot of the time. I would like to change the end links to poly too i realize these wont be greaseable. What was the outcome and where did you buy the bushings. What is the size of the front and rear sway bars and the length of the end links??
View 14 RepliesWhat are the specs for the sway bar bushings that go in the retaining bracket for a 2003 ford f250? went to advanced auto last night to get some got mine off my truck and the one they gave me was a little too small for my sway bar and the retaining bracket.
View 2 Replies2003 f250 6" lift on 35s. How to lift the suspension to change out spring bushings? Was thinking using two chain falls on tow hooks on the front, any easier, safe, cheaper way. I have a farm jack but need to weld a plate on bottom of it for more support...
View 5 RepliesI have a 2013 f250 6.2, I bought the truck brand new only have about 3000 miles on it and the other day I noticed that the drivers side front is lower then the passengers side front, the drivers side is about one inch lower, this doesn't seem right, also my drivers side front wheel seems to be pushed forward about one inch to the bumper that also doesn't seem right.
View 3 RepliesOn the F250 trucks, if I changed the mounting frame under the seat, will the passenger side seat fit on the drivers side? Basically, can I turn a passenger seat into a drivers seat?
View 4 RepliesI drive a 2006 Ford F350 4x4 Crew Cab. I think the radius arm bushings on my truck are bad. I get a clunk going over bumps on the left side in the front end.
I'm assuming it is the bushing in the rear of the radius arm, but I haven't taken it apart yet because I want to have the parts in hand. I ordered a bushing, part number 5C3Z3B203AA. But it looks too small when I hold it up to it. What is the part numbers for the radius arm bushings?
Or am I looking at the wrong thing for the clunking in the front end? I just did the ball joints with Moog both sides top and bottom. The shock bushings look alright. I have replaced the front sway bar bushings thinking that was it. What else could it be?
I just put new rims on my truck which are 18x9 with a -24 offset. I swapped my 35s over from my stock wheels (which they didn't rub at all). When I put my new wheels on, the drivers side rubs really bad but the passenger side doesn't rub at all! I'm extremely confused why this happens. I know negative offset will make the wheel rub weird. But why is it only happening on one side and not the other?
View 10 RepliesThe used 2004 F-350 I bought has developed a driver's side front end howl between 45 and 60 mph over the last 1000 miles. I tried all the standard stuff, rebalanced tires, rotated tires, put on a set of tires from a friend's F-350, replaced wheel bearings, replaced ball joints and nothing has worked.
View 7 RepliesI have a early 99 7.3, I have parked it for the winter an I had moved the truck the other day an have noticed it had leaked some oil, after looking for the source I found that it is leaking out of the #7 cylinder exhaust port. I know the oil is forsure in the manifolds usually burns off but now that it is not getting to operating temp it is staying a liquid. Where is this oil coming from?!!
View 4 RepliesMy drivers side armrest was broken when I bought it. Been searching for repair advise but have not found any. Instead of stopping so you can put your arm on it, it just falls down. I sorta wanted to see what I was getting into before taking it apart.
View 1 Replies99 F250 Lariat SC 5.4 with 98,980 miles. As the title says, I cannot open the rear drivers door. It seems that the cable has broken.
View 2 RepliesI have an 04 F250 and the driver side windshield washer doesn't spray on the windshield. It sprays a stream up high on the windshield. Is it possible to replace the spigot where the spray comes out? Is there another solution?
View 7 Replies2011 f250 6.2. put it in the shop to have the rotors turned, and front brakes while they were under there. Now it pulls to the right whenever you apply the brakes. Can smell brakes on the left front after a short drive time. Replaced that caliper and it's still doing the same thing. I'm stumped at this point.
View 9 RepliesBig trail of clear liquid on garage floor this morning. Truck is dripping on drivers side to rear of drivers side wheel well. Not brake fluid. Trans or antifreeze would have a color to it and a smell. None of that. Was quite humid last night and I did have truck out for about an hour run time. Trying to figure what the heck this is. Don't want to waste my or dealer service time if it's just AC moisture.
2016 f350 crew cab miles under 8k
Where the ac condensate drain is passenger or drivers side?
After the years and 300k miles, the door hinge on the driver side door are getting some play. I wonder if i can replace just the pin on this hinge or the whole thing needs to be replaced. By the way, I am talking about a 00' F450 ...
View 2 RepliesJust came back from breaking in new brake pads. Instructions called for five moderate to aggressive stops from 45 to 10mph, then five moderate stops from 35 to 5mph, then cool down and drive as normal. Drivers side door opened fine when I got in to do the test. It's been opening and closing OK since I bought the truck a few months ago. Got back from my break-in procedure, and the drivers side door wouldn't open more than about 8". Had to crawl over and exit from the passenger side. Found that the drivers side door is binding against the front fender about midway down.
View 1 Replies