Ford Super Duty (1999-2016) :: ABS Light On - Wiring Harness Damaged
Sep 21, 2013
I have been tracking down my ABS light and found that the left front wheel speed sensor has had the wiring harness ripped off from behind the front wheel. I have about 2ft of the harness coming off of the actual sensor.
Question is, since I cannot locate any wires that this seems to be able to be connected to, can I simply cut and splice these wires directly into the Tan/Black + Tan/Lt Green wires going straight to my ABS controller?
View 3 Replies
Advertisement
Installing a Pop N Lock on a 2016? What were the wire colors you tapped into?
View 3 Replies
I recently purchased a 2011 F550 Super Duty with a flatbed mounted on it. Turns out, the trailer wiring harness is totally screwed up and I am getting tons of shorts whenever it rains. Going through it front to back, we are finding multiple problems like missing fuse box covers, damaged fuses for starters. The Ford dealership in Texas that did my prepurchase inspection for me totally missed all of this, so i am stuck holding the short end.
IN the rear of the truck we detected shorts in several areas. One of them is in this adapter pictured along with this. Is this a Ford part, or does it appear aftermarket? Is it just an adapter or is it more than that? I am just now getting to l know this truck more specifically. given the date of manufacture on the label it would seem to be from Ford??? Part # is 99-004 and 71-012-A...
View 1 Replies
I'm trying to find out what the two connectors in the image are.. I've looked through the manual that I have and searched around on the web and find nothing.
They're on a 2015 F250. "upfitter" switches were installed from the factory.
View 12 Replies
The pigtail from my bumper mounted 7-pin to the factory connector is all hacked up from the previous owner so I'm looking to replace that pigtail. Also wondering if there should be 2 connectors down there to add a connector for my gooseneck or do I need to splice another universal 7-pin into the bumper light pigtail? Also, is there another (preferably slightly cheaper) option besides e-trailer for such a connector?
View 3 Replies
Today I picked up my son over at his girlfriends house, and her father was in the garage. He said he replaced the headlamp bulb, but did not insert it back in place before starting the car ( I guess to check it). The bulb and harness must have touched metal and caused a short at a wire into the harness. The bulb would work if you wiggled the wires.
View 5 Replies
I would like to add an LED light to each running board and tie it in with the dome light wiring so that when the door(s) are opened it will come on with the dome light and light up the factory running board. Any info on where a good place to splice into the wiring, and will the wiring be able to handle a couple extra lights?
The truck is a 2012 F-350 XL, SD Dually....
View 14 Replies
I am looking at getting my new truck, my 05 F350 6.0, with factory trailer brake controller, all set up for a gooseneck. I was wondering if there was an OEM kit to add a trailer connection plug to the inside of the bed? If there is, what are the part number(s)?
View 9 Replies
I found these on my buddies truck, its on the frame rail on both sides. I have the connectors and lights to install but there is no power at the harness. Is this something the dealer has to "reflash" in the pcm to make these light up? I assume they should operate while unlocking the doors or opening, ign. on or off.
YouTube.....
View 4 Replies
I just had a headache rack built for my truck. Looking to wire in 2 very bright reverse lights, 2 not so bright lights to deal with stuff in the bed of the truck at night, and also mounted a receiver hitch so I can hook a winch up back there when needed. looking for opinions on wiring for all of this. Never wired stuff like this so I'm shooting in the dark. My wiring skills are adequate but not great.
View 7 Replies
I'm still fighting tow harness problems on my '01 F 250. I started by replacing the 7-way pig tail with a new one which didn't work. Then I undid all the butchering of the harness that was done previously. The factory harness had scotch locks all over it that were used to splice in a 6-way and a 7-way into the bed. I liquid taped all the nicks in the wires. Then I checked for power at the factory harness end where the pigtail plugs in. I have park/running lights, and one of the ports flashes for the left turn signal/flashers/stop lamps. I got rained on before I could check further up the wire. If I have no power to the wire further up is there another place to check?
View 2 Replies
Any info if the "Aux" terminal on the trailer harness wiring on '01 F250s is for reverse lighting? I'd like to put some on my stock trailer. Also, is the "12v" terminal feed switch operated or hot always?
View 2 Replies
My custom air horn setup. I have a schematic here and and need info whether my drawing is right or not. I also need some help on what gauge wiring, what amp fuse and what relays.
View 2 Replies
I have a 2007 F-350 SRW. I bought some mirrors of craigslist from two different sellers. They are from 2008 or later, they didn't know the exact year. I have looked in the tech folder and searched and searched. could not find wires that are the same color as mine. Yes, mirrors are OEM. I need to know what color goes to what color.
Do they match color to color? question mark represents color that doesn't line up
drivers side door colors=============== new drivers side mirror colors
green------------------------------------------------- green
black--------------------------------------------------black
green/white-------------------------------------------black/white?
blue----------------------------------------------------blue
yellow--------------------------------------------------yellow
red------------------------------------------------------red
brown---------------------------------------------------brown
passenger door colors=================new passenger mirror colors
green/purple------------------------------------------white?
black---------------------------------------------------black
white/blue---------------------------------------------black/white?
yellow--------------------------------------------------yellow
green---------------------------------------------------green
brown---------------------------------------------------brown
brown/purple-------------------------------------------purple?
Side note these are in no particular order as far as pin location.
View 5 Replies
Any limited number of lights the factory trailer harness on the truck can tolerate? I'm looking to add some extra running lights on my trailer, also want to put a couple of lights on each running board on the truck, they will be tied in with the trailer harness since it is not monitored by the BCM. I did a search on this a few different ways and couldn't find anything.
View 8 Replies
I recently had need of replacing my left exhaust manifold on a 2000 F250 4 x 4. I removed plastic inner fender well. Now I have a two pin harness with both white wires. One is white with red stripe, the other is white with black stripe. The harness is round with a locking square on one side. The harness is located about 10" from bottom of inner left plastic fender panel. It has 2 mounting pegs. Where the heck does this connect?
View 13 Replies
We bought a 2012 f550 chassis and had a utility bed outfited. As far as I know the truck does not have a tow package (major F-up). They did install a receiver and electric in the rear. The 7 way pin in the rear does have the appropriate wires (including blue). I can not find the harness in the cab under the dash. I have looked near the radio where I have found the harness on our other trucks. I specifically looked for the red white and blue wire under there. Where is this harness? Is the harness still in the cab even without the tow package? This will be for the old school plug in controller, not the ford intergrated contoller.
View 4 Replies
Is it possible to add the factory keyless entry without replacing the complete dash harness? I have an aftermarket unit I can add but I'd rather have oe if possible. Truck is an 2003 f250 v10.
View 1 Replies
I have a 2006 F250 and my 7pin and 4 pin connectors are just hanging loose. I'm not sure what happened to the factory bracket. What is the part number for this bracket? Also, where does it mount to? I looked under the truck and couldnt tell where the factory one mounts.
View 4 Replies
Where I can get the head light to fog light wiring harness..it is almost as hard as finding the holly grail..... 2001 f350 7.3 .......
View 9 Replies
Got my 240 amp alternator in and had all new 1/0 GA battery cables with a 250amp fuse in line made to do all new lines. I started tonight and found a small line going from the alt connector down the power line to a fuseible link (fuse) all in the power line
I wanna do away with the main 4 ga alt wire but obviously I can't do anything with that line going to the plug. Can I put a connector on it and wire that into the one side of the 250amp fuse.
The only other option is to add a wire to beef up the stock line ....
View 14 Replies
