I noticed I was not shifting into 4x4 electronically and replaced the blown fuse in the engine compartment. Now the 4x4 light goes on, but I don't think it is engaging the system...
The back end breaks free very easily, but there seems to be a little pull in the front. Is it possible to have unequal power to the wheels?
Am i correct in starting to look into why I can't hook a scanner or Torque Pro bluetooth up to my truck and starting with blown Cig lighter fuse? (Cig lighter doesnt work, power port does)
View 1 RepliesHorn isn't working found fuse blown. Replaced fuse and horn stays on. Swapped relays still stays on. With fuse out pressing left side of horn cover on steering wheel I can feel/hear relay click. Pressing right side not so much. What and where to check? Is there a way to disconnect the horn buttons on the steering wheel?
View 1 RepliesDid the blue spring upgrade today. The driver side battery was disconnected for 2 hours. After finishing the upgrade I reconnected the battery. When I touched the positive cable to the battery I heard a fuse blow. Now I have no lights, chimes, instruments, gauges, NOTHING, everything is dead. Cannot find any fuse blown. Is there a master fuse?
View 1 RepliesThe dome light/under hood light keeps blowing the fuse. I can't tear the entire interior out to try and chase down the short. Just wondering if any common area this circuit shorts out!
View 4 RepliesAnyways I have a 2006 F350 6.0 and a couple weeks ago I have been having issues with my running lights. In the fuse box under the dash fuse location 17 blows as soon as I insert the fuse leaving me with a short somewhere, no instrument cluster lights (but the instrument cluster gauges work and operate fine), and no running lights on the truck. I have been looking for hours and days and can't seem to locate this short (which I am assuming it is).
View 6 RepliesI have a 08 F350 CC with the factory fog lights. One of them has burnt out. Do I replace just the bulb or the entire unit? Is there a part number?
View 1 RepliesThe pigtail from my bumper mounted 7-pin to the factory connector is all hacked up from the previous owner so I'm looking to replace that pigtail. Also wondering if there should be 2 connectors down there to add a connector for my gooseneck or do I need to splice another universal 7-pin into the bumper light pigtail? Also, is there another (preferably slightly cheaper) option besides e-trailer for such a connector?
View 3 RepliesHow to change my map light bulbs over the front seat of my new (to me) 2010 F250 King Ranch with a sunroof. I have tried to remove the whole assembly with a plastic trim tool with no success. I have pulled as hard as I dare and figure there must be a procedure I am missing. It appears to me that the whole assembly has to be pulled down.
View 6 RepliesI am looking into replacing my cab light bulbs with amber led's. What ones do you recommend? There are so many available out there. I don't want some cheap crap! Also, what is the bulb type in are in the mirrors for the parking light and turn signal?
View 2 RepliesHow to remove the orange cover to replace the bulb in the driver side mirror - tried but worried I'm going to break it...
View 2 RepliesBack Story: Ok so in my infinite wisdom I let myself get distracted when I was looking at an 01 F250 V10 Crew Cab. I thought, it needed all new breaks/rotor & 2 calipers. And new carpet and seats, then I would have a good hunting rig.
So I went and looked at the truck in the dark (first mistake). The guy was very honest with me and told me about all the body and interior issues. Even informed me of the caliper that he disconnected because he could not afford to fix it. He informed me that it did burn a little oil and it's been a while since he checked the oil. Well at that point I was going to look under the oil cap to check for any milky residue. Well I got distracted (Second Mistake).
So here we are 2 weeks after getting bringing the truck home. I already replaced the carpet and seats, breaks & rotor & 2 calipers. Well today I decided to go get some new oil and a filter, and do a quick oil change since who knows when it was done last.
Issue:While draining the Oil it seemed like there was an abnormally large amount of oil in this engine. (See photo of bucket full of oil from this rig.) Well didn't think much of it and swapped the filter. And went to add new oil to the engine and found that under the cap was some milky substance.
The V10 has 420K original miles. I have heard that is no big for the V10 but thought it would be good to note this detail. Questions I have: Should I get some kind of test kit to confirm it's a blown head gasket? If so what kind of Kit should I look for? Do you think this truck is worth replacing the head gasket?
Any chance this may just be a known issue for the V10 and I just need to replace some kind of valve? I could not find any you tube videos of a head gasket replacement on a V10 any thoughts where I should look?
My Skills: Just to be clear I don't know anything about the V10 motor. I have a 94 f-250 but have never had to dive in to a head gasket replacement before. I have done a head gasket replacement on smaller engines (IE: car and a jeep) but those were obvious that they had a bad head gasket.
Three times I've had a blown out tire on my '02 F350 crew cab/long bed 4x4 V10 while driving long distances on the freeway. Twice drivers rear, once drivers front.
All 3 times were in warm weather (85-95F). First time (rear) was on the Yokahama's which were on the truck when I bought it and a bit oversized. The date code says they were 10 years old, so I replaced all the tires with OEM sized BFG Rugged Terrains. Then it happened again- front last October. Did about $4K worth of damage. Now my buddy, called me up saying it happened to him (rear) while he was borrowing my truck for a trip.
In the first first two cases, I noticed a wobble. The second time wasn't as bad and stopped when slowed down (75 to 65mph), but it still blew. I specifically mentioned this to my friend to be on the look out and he said it never wobbled, but prior to it blowing the truck started to pull to the left.
In all three cases, the truck wasn't towing anything, but had stuff in the bed. The first two times I was taking my race motorcycle to the track, so probably had about 800lbs worth of gear in the bed & cab. My buddy was probably carrying less weight, but I'm not exactly sure how much. Before my buddy borrowed the truck I set the tires to 70PSI since he was going to drive 400mi down to Barstow and then some light offroading on BLM land.
The alignment was done after October and it has four new shocks. Tires look great, have maybe 15K miles and I rotate them every 5K miles. The only mods to the truck are swapping the 4" F350 rear axle blocks with the 2" F250 to lower the bed.
I did a bad thing last night, I put a jumper in the 20 amp cigar/data link connector and all kinds of things went out, will not shift out of park, no directional, power windows, power mirrors, no brake lights ,no hazards, no wipers, no interior lights and I don't know what ever else is not working.
View 3 Replies2005 FORD F350 Lariat 6.0, 61,000 miles, and in prestine condition. Just got the news the head gasket is blown! HOW DID THIS HAPPEN?!!! My mechanic says to scrap the whole engine because the 6.0 is the worst engine around. This truck should last for years!!!!!
View 14 RepliesThe spark plug in chamber 2 blew off while the vehicle was in motion (approx 35 mph). Purchased replacement plugs and when I went to install, there was nothing for the plug to grab (i.e. appears that all of the threads on the block/casing are gone . Not sure what my options are.
View 2 RepliesMy problem had been intermittent for last few days. I have a Ford Crew Cab - 7.3 Powerstroke Diesel. The ford store told me it would cost hundreds of dollars to chase this short- to wait til it finally burns out then - bring truck to them.?
My fuse # 45 a 10 AMP fuse . Keeps blowing out. This fuse controls the gauges on dashboard and fuel peddle. I can start engine and if gauges come up like they should- I can place into driver - and give engine fuel from peddle- gauges down dead and no fuel go to motor. It just idles and still runs and will still move forward or backward. But only at idle speed.
I could replace blown fuse - #45 - 10 amp and it would a the first few times would go and work normally.
Now everytime I replace fuse it blows fuse - sometimes after putting 10 or more fuses in- one might work until I stop or put into park. Then fuse blows again??
Last night and today it took no less than 20 - 10amp fuses to get close to home and end up straight wiring with a small piece of electrical wire - severing as a jumper- it ran great - til I stop at mail box and got mail - saw slight smoke and pulled wire quickly out and idled down driveway to house..
I have been having a problem with my 2002 F250 Super Duty 4x4. It started about 2 months ago. I was in traffic (truck hadn't even been on for 15 minutes). The temp gauge spiked, so I pulled over and turned the truck off. I turned the ignition on and the gauge was normal so I started it and all was fine.
Fast forward a little and every so often about every 3 weeks it would overflow (coolant) but not get to the point that it would overheat. I changed the thermostat and all seemed good to go. Fast forward to yesterday morning. Got in the truck and left to go hunting, and I didn't even make it 10 minutes down the road when I turned the heat on and it blew cold.
I started to see the gauge creep up so I pulled over and shut it down. Upper hose was cold, lower is cold and both heater hoses are cold. After some time of waiting, I started it but the gauge kept creeping up and no heat, so I kept shutting it down. After about 5x of this, the heat worked and the upper hose got hot and all was right with the world. SO I drove it home. Coolant is new, flushed about a month ago and was running great since then. Thermostat is new. Do I have a blockage somewhere? Water pump bad?
Did I just blow up my turbo or what? I'm kinda new to diesels, I just purchaced a 2005 F-250. Today I was pulling my rv out of Devils Den State Park in Arkansas, beautiful place. There is a steep grade coming out, my truck was seeming to be having a kind of hard time, then a loud PFFTTTT sound. That is the best I can do for writing sounds. It sounded like a compressed gas cylinder blowing up! The pulling power went to nothing and the turbo gauge went to 0. It sounded fine at idle, other gauges were fine. I'm guessing my turbo is DEAD, what say you?
View 4 RepliesI blew a power steering cooler line yesterday and lost a bit of fluid. Removed and replaced the line, consequently losing most of the fluid in the system (during line replacement). Re-filled the system and now i have great power steering when driving but none at idle. If I bring my RPMs up about 150-200. I get it back in full force. Could my PS pump be on the way out or might this just be air in the system?
View 3 RepliesStarted my truck the other day no problems,minute into the start truck shuts right off like someone turned key. Checked fuses , #30 fuse under the column was blown, replaced it and tried to start truck. No luck fuse keeps popping. After changing again i was able to get truck started for a second and POP goes the fuse?
1999 F550 superduty 7.3....