Ford Super Duty (1999-2016) :: 2015 - Truck Loses Gauges While Driving And Throwing All The Warnings
Mar 20, 2017
I bought my 2015 in August of last year with 8K miles and here I sit at the dealership with 15K for the second time in 4 days.
Truck loses gauges while driving and throws all the warnings (tire pressure, temp, hill descent, and on and on). If I turn it off it won't start. I disconnected the battery first time it happened, about a month ago, and it restarted. Thursday it wouldn't start until the tow truck driver got it off the flatbed at the service center (go figure). This time I got it on video and parked it at the service center myself. I showed the foreman the video.
The service advisor told me it needed a software update last Friday when I picked it up, which is another way of saying they had no idea and didn't put much thought into it since it was running when they had it. The notes said they did a diagnostic, found no codes, and "drove it on a bumpy road" with no issues. Really?
This is extremely frustrating! I hope they actually do something this time. The damn thing started again before I left it with them!
View 3 Replies
Advertisement
So I'll be driving down the road and the gauges will randomly start jumping around then the truck will just shut off, this just started a couple days ago, it seems to be gaining in frequency, when i try and restart the engine all my warning lights flash on and nothing happens, try again and it starts back up, now the last time it happened all of the above happened but it was followed by a fast clicking noise from under the steering column, it has to be a electrical issue as i have full tanks and motor is in tip top shape. Also no codes pop up with my code reader.
View 1 Replies
I recently bought a h&s tuner and installed a dpf delete kit. Everything works great when the truck is not plugged in to the tuner although when I do plug it in, the truck keeps throwing a communications code and goes into a limp mode until I delete the code. I believe it was p0073 but i maye be mistaken. Regardless it has to do with communicating through the obd2 port. I sent the tuner in to get checked out and it turns out its something to do with the truck. I've checked all the fuses and tried to check for broken wires. Where to look next?
View 4 Replies
I have a 2001 250 Super Duty. I am having an intermittent issue with the electrical system and transmission. I don't drive this vehicle very much so it sits for 7-14 days at a time.
Previously I had the od light flashing and had the transmission solenoid replaced. A few weeks ago I decided to drive it to the corner store. As I arrive home the od light starts flashing and the transmission starts shifting funny. I pull into my parking spot and turn the truck off. I sensed the shut off was weird so I tried to start the truck. NO POWER! None! I go back to the truck a few days later and it starts up without an issue.
Approx. 20 miles later it starts again. This time I have to jump the battery. I ran the truck and it drove without issue. Again a couple weeks later it starts in again with the light flashing and electrical dying. What it may be? I'm probably going to get rid of the truck as I can;t justify to myself to keep dumping money into it.
View 5 Replies
We have replaced 4 fuel pumps on a row.
Voltage is good...even ran a fresh circuit.
Ran new supply lines
But, can't seem to understand the continued drop in pressure. It usually takes about a day of driving to crater after a new pump/filter is installed.
It never dies, just loses power and drops the truck to an idle. Funny thing...if I shut the truck off and turn it right back on...full power for a short period!
The truck is used on a ranch that has plenty of rough roads...thought inertia switch maybe but i believe that would stop fuel completely right?
I am totally stumped and so is the mechanic.
View 5 Replies
In a 06 F250 the gauges and radio die randomly while driving. The dash lights stay on though. What can I check or replace?
View 5 Replies
Ihave a 2004 F350 4x4 Dually diesel. While in my hay field I hit a small rut and the truck bounced. About two seconds later all gauges and lights/windows quit working and the truck ran rough. I have a Banks system and it registered a code 33. Maybe 32 error. Book says it is an airbag deployment. They did not deploy. So I drove out of the field and turned it off to see if that would reset the gauges. No, not only that but the gauges all swept the faces from off to full to off and the truck would not start, just chatter.
I disconnected both batteries and waited. Reconnected and it started, but the gauges quit after 10 seconds..... Everything flatlined even the banks IQ. But the truck kept on running. Got back to the ranch and the batteries went flat overnight... Charged them up, starts fine gauges work but alternator puts out 11.5.
View 2 Replies
I have a 2004 6.0 133000 miles will be driving down the road will start to hesitate and looses powers and shuts off. wont start back up but if you wait 10 to 15 minutes will start up and run just fine. wont do it again. Just had new head studs put in new head gasket and egr delete 2 new injectors put in
View 3 Replies
I have a 2007 6.0 with 260k on it losing gauges and radio intermittently while driving. Lately 2-3 times a day, lasting 3-4 seconds a time.
I have heard it could be the shift lever, instrument cluster, fuses, etc. I have kind of ruled out fuses based on the behavior of the failure.
Looking for a second opinion before I start taking the dash apart or send it in. The truck just can't be down for a long time right now.
View 7 Replies
Bought a brand new F250 6.7 it has 7000 miles in it now and the check engine light comes on and the truck goes into limp mode. I have taken it in to the dealership twice they said there is no code they can find and they just reset the check engine light and it does ok for a bit then starts the cycle all over again. It also is only getting about 6.5 mpg....
View 6 Replies
I have a 2015 F350 and with the long dark hours of driving, I want to put some auxillary lights on the front of my truck. I have a ranch style bumper on the front and I am thinking about installing a pair of flush mount LED driving lights. I was wondering, how well they work? I am personally thinking about the rigid flushmount hybrid driving/flood lights with the focused beam.
View 6 Replies
I have 2 F-350 4x4's and they both wander back and forth when driving. They feel like they don't have enough caster. One is a 2000 V-10 extended cab with 8 foot bed. The other is a 2015 6.7 diesel crew cab with 8 foot bed.
I have driven the 2000 for so many years that I have grown use to the very slight sawing of the wheel to keep the rig straight. When my wife got her 2015 it does the same thing. The 2000 is leaf spring and the 2015 is coil spring. This bothered me when I first got the 2000 (used) but I just figured it was part of
the charm of a big truck.
I know I could put a caster shim in the 2000 but there must be a better way to solve the problem. Both are stock, no lift and no heavy winch or stuff.
View 6 Replies
I have a 2008 F250 crew cab lariat 4x4 with 20 inch factory wheels that the steering wheel shakes during normal driving left to right. I bought this truck with 1500 miles on it. This shaking started at 50k miles and I was thinking it was a balance issue so I got new tires a month later since mine were about worn out anyways. They were factory replacement nitto terragrapplers. Shake was still there, swapped out for another set of nittos and shake still there, swapped to BFG AT KO's and shake better, but still there. I have gone through 10 or so balances, 5 roadforce balances, 2 alignments at 4 different shops including the ford dealer through the 3 sets. My wheels are scratched to hell and back from the careless people at the tire stores from so many balances.
My truck sat at the Ford dealer for a week just the other day and they changed the steering stabilizer. I thought it was gone, but a a few days later shaking started again. It almost feels as if every little bump, rut, crack in the road the steering wheel feels and shimmies (doesn't matter the speed, gets worse and more noticeable at higher speeds). The Ford Dealer says can't duplicate, but then when I go down there and test drive with them it's "oh yeah I see that, it shouldn't be doing that". The Ford Dealer says they can't find anything loose in the front end when I tell them to check tie rods, bearings, etc.
My truck has 62k miles on it now and it's driving me to the point of thinking about trading it on a Chevy. I love my truck, but it kills me everytime I make a payment and it rides like crap. I am still under extended warranty so I need to get this fixed before it goes out. I've also noticed that if I turn my steering wheel back and forth real quick while driving like warming up for a Nascar race I can feel a bumble in the steering wheel. This is NOT the death wobble as I use to get that around the 20k mile range and it disappeared and has never been back.
View 14 Replies
I got a 2000 f250, 5.4l, I got a check engine light bout 2 weeks ago and didn't experience any driving issues. The code was p0171, just recently I've been experience troubles idling, if I let my truck idle for about 3 minutes it will want to shut off, also on acceleration the hole truck bumps, feels like I'm in an earthquake. Where I should start with this problem?
View 11 Replies
Driving up a slight hill unloaded yesterday at about 40mph constant pedal pressure the truck shifts into neutral...at least that's what it feels like. Revs go up and no power. When I take my foot off the pedal the transmission catches and drives fine. There is no bucking or hard shifting, just that slipping. What it could be? This problem arose suddenly....never had any problems prior. It is not an issue that has gotten worse over time...
View 14 Replies
All week the truck was acting like the clutch was slight depressed when first taking off and then today i was driving and the underside of truck started smoking like crazy and slowly lost all the gears could put it in any gear and nothing just was acting like it was being revved. does this mean clutch is bad?
View 10 Replies
Having problem with oil cooler pump throwing the wrench light? Dealer says it cools the oil and mine could be clogged a bit.. cost of total job around 8-10 k. And take cab off.
It seems when engine gets hot wrench light comes on cause not cooling oil down properly... it overheated. Gauges were very high.. Once when I was in full boost towing a ranger up a hill. First time it ever happened.. pulled over for 5 mins than started temp went back normal and finished tow no problem after that cause I kept boost lower!
View 9 Replies
I have a 2008 Canadian F250 SD 5.4 triton. Its got 224000km on it and began to get the dreaded 5.4 dieseling when hot and idling. I replaced the timing chains, guides, both tensioners and crank gear. I confirmed the cam timing was correct with the crank key at 6:00 and the chains marks on the R and L. I replaced 2 coils on cyl's 2 and 3. I replaced the MAF sensor, fuel rail pressure sensor, cleaned and confirmed working the crank sensor and both cam sensors. I fixed the broken Bank 2 cam sensor wires. I changed the plugs and replaced all 4 O2 sensors.
Now the truck idles great but when driving it bucks and coughs and has zero power. I cant even get to 80km/hr. The computer now shows codes P0172 and P0174 which means the Bank 1 is rich and the bank 2 is lean. The O2 sensors are working and moving around. The back 02 sensors are both reading in the 0.8Volt range but bouncing around. The front 02 sensors are both moving from 0.1 to 0.8 constantly. The long term fuel trims are +9.5% bank 2 and -4.7% bank 1 at idle. When the throttle is off idle they become +25% bank 2 and -25% bank 1 . How is this possible and what can I do to fix this engine?.
View 10 Replies
2008, 5.4 liter, F250, with 6-speed manual transmission
My truck was running fine until I decided to clean my engine. I just wanted to remove the extra dust covering it, so I used a low pressure garden hose to wash away the dirt that had accumulated last winter and spring.
It started throwing codes like Fuel Rail pressure sensors, P0191, P0192. I had no power, and I could hardly drive the truck.
I figured I had some water in some connectors, so I checked around, but could not detect any moisture.
I kept driving it, and the problem got less severe. One warm summer day, I drove my truck for about an hour trip, and everything looked fine after this. Problem never came back.
I was even noticing that it was better on gas that ever before, I was doing 11liters/100km, in city driving.
Until one day (2 months later), I had to disconnect the battery to do some servicing on my truck (more that 30 minutes), and it started to run crappy again, having some piston misfire, throwing codes P2198 and P2196, (O2 sensors). No power, if I am very gentle on the gas pedal, I can manage it, but as soon as i try to accelerate, runs like crap, black smoke coming out of the exhaust.
The problem comes and goes, sometimes, the problem stops, and I can get going, no issues. Air filter is clean, even tried with no air filter, no differences., but it really sounds like bad air/fuel mixture.
View 2 Replies
I've had the truck for almost a year. It had 2900mi when I bought it. It's got 18k on it now. A few weeks ago I stopped to get the mail and the dash started going crazy throwing every warning you could think of. I got back in and all the codes were gone. I figured it was a fluke until last week. It did it again. I let it run for a few minutes and decided to turn it off. It wouldn't start back up right away. After about 20min, it started and I drove straight to the dealer.
They had it for 2 days, cleared all the codes and couldn't replicate it. They said the codes were U codes and not real codes?? The next morning it did the same thing again. I took it back and after 3 days, they said they could only think that my AMP Powersteps were the cause. They disconnected the steps and wanted to keep it for a few more days. I said no and picked it back up. It made it 2 days and I got the codes again.
[URL]
View 6 Replies
I've got a 2006 F350 5.4L.
The ABS light came on and it was throwing a 'rear speed sensor' code. I searched around and it seemed to be a common issue that the sensor goes bad and needs to be replaced.
I bought a sensor and replaced it, but in doing so, I saw that while the sensor was indeed bad (cracked) the wire right at the connector was corroded.
I replaced the sensor but the ABS light is still on the dash. Is it possible that they code simply needs to be cleared? I was able to read it with my OBD2 dongle and Dash Command App, but maybe I'm not able to clear it?
Or is it more likely that the corroded wire on the connector is the issue? (it wasn't fully corroded and I cleaned it up and sealed it.). It didn't look like I could pull the wires out of the connector, so I assume I'll need a new connector. What is the part number?
View 2 Replies
