Ford Super Duty (1999-2016) :: 2015 - All Warning Lights Came On?
Jan 14, 2016
On my way into work this morning, all the warning lights came on, along with the check engine wrench. My display was showing that I was overheating and the gauges stopped working. While this was happening, there was no noticeable change in the way the truck was performing.
After about a minute or two, the warning lights shut off and the gauges worked again as normal. The gauges did not show that the truck was overheating at that time. Another few minutes went by and the same thing happened again. Then the gauges came on and the warning lights shut off for the second time, it did not happen again for my 10 minute ride to work. On my way home this evening, this did not happen again.
The truck seems to be charging and the battery seems to holding a large as well. The truck is a 2015 F350 XLT 6.2 with about 9700 miles on it.
View 9 Replies
Advertisement
Had the DEF 500 mile warning come on last week. Second time for this. First time early on when it was new. Put a 2 1/2 gal. container of Blue DEF then and all was well. This time I did the same thing but keep getting the 500 mile warning afterwards. Cancelled the warning a couple of times , and now I am getting a warning that I have 378 miles left on the DEF fluid remaining. Its like the truck didn't recognize me adding the 2 1/2 gal. Also the check eng. light is on now. Thinking thats related. 7,000 mile on truck
View 3 Replies
I love my new truck. '15 250 CC SB. It would be nice if when I am backing up not to have the dash lights in my eyes once I turn off the head/parking lights at night. I turn off the head lights so as to make everything darker. Much easier to see what is in my mirrors.
View 2 Replies
I have a 2015 F350 and with the long dark hours of driving, I want to put some auxillary lights on the front of my truck. I have a ranch style bumper on the front and I am thinking about installing a pair of flush mount LED driving lights. I was wondering, how well they work? I am personally thinking about the rigid flushmount hybrid driving/flood lights with the focused beam.
View 6 Replies
2006 350 6.0, on startup the high and low 4x4 and brake lights come on the dash with a constant tone for a minute or two then stop.
View 2 Replies
I've had the truck for almost a year. It had 2900mi when I bought it. It's got 18k on it now. A few weeks ago I stopped to get the mail and the dash started going crazy throwing every warning you could think of. I got back in and all the codes were gone. I figured it was a fluke until last week. It did it again. I let it run for a few minutes and decided to turn it off. It wouldn't start back up right away. After about 20min, it started and I drove straight to the dealer.
They had it for 2 days, cleared all the codes and couldn't replicate it. They said the codes were U codes and not real codes?? The next morning it did the same thing again. I took it back and after 3 days, they said they could only think that my AMP Powersteps were the cause. They disconnected the steps and wanted to keep it for a few more days. I said no and picked it back up. It made it 2 days and I got the codes again.
[URL]
View 6 Replies
I have a 1994 F-250 XLT heavy duty model. No warning lights are on. A few times a month my transmission will start shifting hard, kicking into the next gear. The odd thing is, if I reset the computer it stops. Shifts smooth as butter. The fluid is a vibrant red and the fluid looks great like it's new. What is going on? I'm getting tired of having this happen. The truck has 108,500 miles on it.
View 10 Replies
Just got a new-to-me 2006 F350 Super Duty XL with the 5.4L V8 and 5-speed auto. I haven't had a full-size truck in a few years and forgot what I was missing!
When I bought the truck, all gauges were inoperative except for the fuel and oil pressure gauges. The previous owner told me they would work intermittently and at some point just stopped. The usual warning lights - ABS, CEL, and "the wrench" - were all lit, and from Googling and searching this forum, it looked like an easy fix - probably a pinched or frayed shifter wire, or possibly a cluster repair.
I took it home and did a self test on the gauges. The "sweep gauges" made everything swing fine, so I was thinking it might not be a problem in the cluster. I pulled the steering column apart, removed the Tow/Haul overdrive wire from the plastic retainer, re-ran it with some slack, taped the end where it comes out of the shifter (even though I saw no breaks/frays) cleaned the connections, gave it a dollop of dielectric grease in the connector, and put it all back together. VOILA - GAUGES and no warning lights! You can imagine the touchdown dance in the driveway.
Fast forward a few weeks and....back to no gauges and warning lights lit. Figuring the overdrive wire had finally given up, I ordered and installed a replacement shifter figuring it was an easy and cheap fix. No joy - same problem. Tried cleaning and reseating the connection. Nothing. I've searched FTE like mad and it seems like 95% of the problems are with the wire exiting the shifter fraying and/or blowing a fuse, but this is a new shifter. I've also checked fuses #2, #24, #33, #36, #41, and #45 (some referenced #19 but I don't have a fuse there). All were unbroken - just put them back in and reseated firmly. I did a code pull via OBD2 and have a "rear catalytic efficiency degraded" code...not sure if that's related, but figured I just had an exhaust issue.
I may take the dash cover off and try to clean and reset the connections on the gauge cluster, as well as do the same for the PCM. Is it possible that the tow/haul overdrive wire to the PCM (where the shifter connects to) is bad? How to test and/or replace if it comes up bad?
View 14 Replies
I have a 2004 f 450 cab and chassis truck that the problem started out with the radio not coming on. So I asked the local dealer and he gave me a wiring diagram. I pulled the fuse box out and checked the wire from the fuse box to the radio and it works. Great. But he also said I could take the fuse box apart and check to see if their was a broken connection in it. So I did and could only get so far with it. It has a lot of pin on one side that go all the always through and are soldered on both ends. So I put it all back together and reinstalled it. Now the instrument cluster does not work. Not even the warning lights. The interior light doesn't come on either or the door chime. Is it possible to melt the solder off and open the fuse box completely and check all the connections.
View 1 Replies
What are the main differences between the F-350 and the F-450?
I see now that you can get the wide track front axle on the F-350 as well.
View 7 Replies
Recently bought a 2015 f250 xlt.....very impressed with it. Only thing is the wheel feel and look to small. What is the largest size i can run stock? Will 35/12.5 fit on stock 17 wheels or should i just spring for aftermarket rims at the same time? Also exhaust options for the 6.2? Remember, i need load range e!
View 4 Replies
Just did my first oil change on my 2015 Super Duty 6.2 engine. I got the Fram filter the book called for, a PH-2. There's goobs of room for the longer filter. Would that be the PH8A? The book is about to trying to figure the comparable long vs short filter. Why do they insist on those short filters when a full size will fit? My Dodge Ram Hemi was the same way.
View 14 Replies
I have a 2015 SD with only 4100 miles on it. This has happened to me twice. Both times, traveling slowly at idle or just above. Anyway, tried to give it a little gas, and -----nothing. Lightly pumped the throttle a couple of quick times and back on line. The motor didn't die, but there was no response to the throttle at all. The first time, I thought maybe it was something I did. Then it doesn't happen for a month and a half and then again, in heavy traffic in the rain. Haven't had my first service yet, and you can bet I'll tell them about it. Almost felt like a two-stroke that had loaded up?
View 2 Replies
I have a 2015 f250 extended cab, gas with 31000 miles. Its a work truck but its my day truck as well so lots of easy miles too. Checked the brakes today thinking it may be time for pads and found lots of grooves on all rotors, pads have lots of life yet. Is this common on the 2015? did ford give us low quality rotors? should I replace with less aggressive pads? I have had no braking problems, noise or pulsing. I thought I could put a second set of pads on the original rotors.
View 8 Replies
OK, so I have the brake pedal downshifting, but there is no real exhaust brake. Can I have one installed, like the latter model 2015 or even the 2016, with the button?
View 9 Replies
Hearing some static on my radio. Dealer said Ford aware of problem but nothing they could do. This was a couple of days ago. Just passed 36k. Have always owned Ford pickups but have always hated dealing with their service people. Hear it on satellite and FM. It slight but noticible.
View 6 Replies
Just replaced my recently stolen tailgate. What are the dimensions for the King Ranch emblem location for a 2015?
Also, any way to tie the tailgate into the alarm system (similar to the way the hood is). I'm guessing that you could possibly tap into the wiring under the hood and add a switch/contact at the tailgate... Also, how would this interfere with engine immobilizer, etc?
View 5 Replies
I have a 2015 F250, cc 4X4 PSD. It has 22,000 miles on it. I notice a small quarter sized drop of oil after it is parked by the right side front wheel. It is coming from behind the dust cover and universal joint where the axle goes into the tube. I dont know how long it has been leaking. My issue is I am about 800 miles from home on a camping trip, have to go back to work Monday, and lcoal dealer here can't take it in till next week. So, if the hubs are not locked and the truck is in 2 wheel drive, the gears shouldn't be turning right? I assume it is ok to drive home. I didn't want to pull the plug and check the fluid because if any runs out and leaves a stain on the cover, I don't want ford trying to deny warranty claiming I messed with it first.
View 5 Replies
I am looking at a left over 2015 F250XL, 6.2L, 4X4, Short Bed. It is a new vehicle, 320 miles, it came in a dealer swap so that was the transfer miles. Truck was built in December 2014.
Question: It has bucket seats with no console. Well, there is some small plastic thing that is a cup holder between the seats, but NO arm rest center console. Is this normal? Or did someone take out the center console/arm rest and swap it into something else, and just found something to bolt to the floor? The one that is there appears it could be a factory piece, but man alive is it cheap.
Also, why no fold up arm rest attached to the seat??? Ford did this in the past. Is there a bolt hole to attach an arm rest from another Ford bucket? One that you could fold up and down maybe?? You would have to make a hole in the fabric to use it, but someone should be able to go feel around for a threaded hole or something.
View 5 Replies
Question on my 2002 f350 front end conversion to 2015 front end ? I need to know, how the wiring goes to the wiper motor to get it wired up...
View 2 Replies
have a new 2015 SuperDuty that when you start engine, then turn radio on,,,radio will play for 3 seconds , go off for one or two,comes back on repeats process for four or five minutes before the radio or CD player plays on on continuous basis,,,is this the way the new radios operate?
View 3 Replies
