Ford Super Duty (1999-2016) :: 2014 F350 - Changing Rear Blocks?
Jun 19, 2014
I have a 2014 F350 (specs in my signature) and I want to change the 4" rear blocks out for F250 2" blocks to lower the rear of the truck.
Looks like a fairly straight forward replacement but I have a few questions.
Will the shocks need to be replaced? I do eventuality want to replace them as the stock ones are not that great but I only have 2500 miles on them.
When I do order new shocks for my truck after the changing the blocks do I order shocks for a F250?
I would like to go OEM parts for this but I am having trouble finding the blocks and u-bolts that I need. What are the part numbers for these?
Anything else I should know about to do this swap?
View 11 Replies
Advertisement
I have a quick question, but thinking of changing out my stock OEM rear axle blocks for the 2012 F350 SD 4x4 SRW type.
Does it matter what the wheelbase is?? Model being a CC, SC, etc?
Or...are all 2012 F350 SRW rear axle blocks the same?
View 14 Replies
I want to know if there are any issues when removing the rear block, also do I have to put a new block in or can I just leave it out ....
View 12 Replies
Here within the next couple weeks, i am wanting to do some routine maintenance. right now on my list is just an oil change along with the fuel filter.
View 6 Replies
I've done all the fluid but the power steering and the coolant. I'd like to change out the power steering fluid in my 08' F350. What fluid do I need ?
View 2 Replies
I need to change the fuel filters on my 2014 F250 with a 6.7L. Are there any special tools required and any tips on how to get this done?
View 7 Replies
Just moved into the 250 from years of 150's. Now have 98 miles and read that the tran would have noise but normal while breaking in.
whats normal, not used to this much Clunk while changing from P to D ect. More noise than used too I guess.
3.73 gears
2014 F250, 6.2 gas 2wd....
View 8 Replies
2005 Ford 350. I want to change the ball joints on the front axel and I cant remove the axle out of dif. to remove the ball joint housing. I have been prying and pulling and it just moves out a 1/4 inch or so .They tell me there is no ring to remove in dif before you can pull it out but why this trouble?
View 4 Replies
I'm gonna change plugs , hoses, belts and fuel filter on my 08V10. Hoping it works with the mpg.
Anything else I should look for or do? Is there anything I need to know about changing the fuel filter?
View 4 Replies
My truck is a 2008 F250 6.4 Powerstroke 4x4 King Ranch, CrewCab, Shortbed.
I don't know which rear axle ratio it has - maybe someone can help me. the tires mounted are 275/60R17 and in fifth gear (TC locked) the engine has 2000rpm @ 70mph. I think it is a bit to much so I want to install a kit with and lower ratio. I pull trailers just sometimes and here in germany these only have 3,5tons max weight. So I think I don't need this power at 70mph. 1750rpm would be enough. How do I have to modify the front axle ratio if I get a lower-ratio-rear-axle?
I want to lower the fuel consumption. After some modifications, the truck needs round about 12-13L/100km (18-20mpg) and I think it is possible to lower this as bit.
View 3 Replies
I have a 2014 f 350 super cab xlt. Ford design engineers should be ashamed. But really who has installed the older (2009 ish) ford seat in there trucks for a little more comfort? How much fabrication was needed? Hate to say it but if I cant put the older truck seats in I'm going to buy GMC. These seats really suck.
View 3 Replies
How do you remove the air bag on a 2014 F350 super duty. I have search every where. Nothing new on Google.
View 5 Replies
On one of the trucks in work, the salt has corroded the truck side plug for the reverse camera in the tailgate. Because of this, the camera no longer works.
Is this part of the whole rear wiring harness, or it the tailgate plug a separate pigtail that can be replaced? If it is a separate part, what is the part number so I can order it?
View 1 Replies
Do a 2014 f350 front bumper will fit on a 2001 f350? Wanting to know if the bolt holes and body lines will match up? I put a 2014 rear bumper on and it bolted right up.
View 8 Replies
I just bought a 2014 F350 from copart and its about to arrive in florida on a transporter. There is no key and no power (flood damaged) and wheels are turned sideways. I am having the transported meet me at a ford dealer so I can get the key made to remove steering column lock. Once I have this, any way to manually select neutral to take it out of park and roll it off the truck.
View 2 Replies
I have a 2014 350 crew diesel short box. I am told, I have a 28 gallon tank but can't get over 22 gallons in it even though my gauge show e and my read out says I have 10 miles left until empty? Dealer says the left over 6 gallons is a reserve...
View 14 Replies
Just picked up new 2014 F350 lariat today and I can't figure out how to change the keypad code. I enter the factory code and hit add, but when I enter a new 5 digit code it wont let me hit enter.
View 2 Replies
I am putting work lights and LED warning lights on the back rack of the 2014 F350 diesel in work. Where are the wires for the upfitter switches, and are they prewired into the fuse box, or do i have to hook them up?
View 7 Replies
I picked up a 2014 F350 CC a couple months ago and have finally driven it in the evening. I went to turn on the first row map lamps and the light did not illuminate. I could turn it on with all of the interior lights, but not just a single map lamp. It also works when the door is opened or the RKE unlocks the truck.
View 2 Replies
only have clearance lights at plug no output for brake and turn signals
View 1 Replies
What exactly does the sensor on the rear axle do? 08' f350. I know it's a speed sensor of some sort, but what does it do or control exactly.
View 3 Replies
