I have a 2012 F-250...per DOT specs, the fog lights go out with hi-beams on. However, in my opinion, the high beams on my truck are among the worst I've seen. Low beams are OK. Is there some easy mod to keep the fogs on with the brights?
View 14 RepliesA good while back I seen a thread to do this , but can't locate it now. I have a 2012 F250 and looking to make my night time driving better ....... I want to run both low and high beams at the same time and getting the fog lamps to stay on when going from low to high beam.
View 14 RepliesMy truck only has low beams. When you move the stalk on the colum backwords it changes nothing, when you move it forwards the low beams go out but the high beams do not come on.
View 14 RepliesI have an 2001 F250 SD with 7.3 Diesel. Headlight switch failed and I replaced it. But now I have no high beams and my dash lights that light the dash up don't work. Gauges, fog light, low beams all work fine. Fuses checked. Multi function switch checked. What to do next?
View 1 RepliesI read in a thread about how fog lights need the auto light sensor or something in the kit to be installed and flashed.
My truck is a 2012 f250 XLT that I bought left over from a podunk town IN illinois. It does not have fog lights but it Does have automatic head lamps. So Im very confused on what kit to order to add fog lights to my truck.
Have a 2012 350 cclb 4x4 6.7 lariat, interior lights don't work. Not with any door open, Not with switch. map lights work. We've checked every fuse in cab and under hood. What to check now ?
View 8 RepliesI recently realized when showing a friend my 2012 Superduty c/c that the dome lights didn't come on. I tried all 4 doors and nothing. I am assuming that I may have unknowingly hit a switch. I thought that the only switch was in the door itself.
View 2 RepliesNew to me 2012 F550 parking lights will not go off. Battery disconnected now. Touch battery cable parking lights come on.
View 14 Replies2012 f250, fog lights stopped working and tried fixing yesterday. I'm getting 12.8v at the plug but as soon as you plug the light in it goes to 0. Ran a new ground from frame and the hot from plug and still nothing. High beams off, truck running and switch pulled out. Bulb is fine, hooked it straight to battery and it comes on. I though it was a faulty ground but by running a separate ground and still nothing. I'm at a lose.
View 2 RepliesI have a 2012 F250 and am having a problem where the interior lights wont come on with the dash switch or when the doors are opened. I have confirmed that it is not a bad fuse, also the lights will come on when the switch on the individual lights is manually pushed, but not automatically like they are supposed to. I dont see it being a door switch issue because the door chime comes on and the stereo goes off when the doors are opened after turning the ignition switch off. I've read that the dealerships will switch out the BCM. I thought maybe the dimmer switch next to the headlight switch but there is no power to it whatsoever, which also I can't dim the instrument panel lights. What did you do to resolve?
View 1 RepliesEver since I bought this vehicle, the dashboard lights won't light up unless it is totally dark out. For example, yesterday I am driving in heavy rain during daytime (but pretty dark out!) and Autolamp turns on the headlights...but none of the dash lights! I always thought the dash lights should be on if the headlamps are on. Sometimes just the needles light up. How do I know if my lights are actually on if no dash lights are on?
View 14 RepliesI have bought here recently a 1999 F250 Superduty 4x4 with the 7.3l and my problem is my low beam headlights do not work. My high beams and park lights work but low beams do not. I have replaced the MFS and have checked all fuses and wiring and everything checks out. I can not for the life of me find any diagrams on this truck. I have power coming off of my headlight switch and going into the MFS but I do not have power coming out on the low beam circuit. Am I missing something. Really frustrated right now and I can't drive the truck or get plates on it. Also when I flip onto high beam both low beam circuit and high beam circuit coming out of the MFS light up.
View 10 RepliesI just bought a 2012 Ford 4x4 F250 6.2 gas, when I get out of the truck the dome light/cargo light stay on for 9 to 10 minutes before they go out, someone said to spray the door latches and this should clear up, I have tried that and the lights do still stay on, there is an error code of left rear door ajar, my guess is something/sensor or switch has to be replaced, wondering what it takes for replacement/repair of the switch
View 14 RepliesI have a 2012 F350 and the interior lights and cargo light do not turn on when I open my doors. The maps lights work if I manually turn them on. Why this happens and how to correct this issue?
View 2 RepliesI just purchased a '12 f250 Lariat w/ 39k miles. When I got home I noticed one of the three LED running board lights does not work on the passenger side. Can I replace this myself?
View 6 RepliesI have a 2006 F-250 Super Duty (6 liter diesel). The high beams stay on unless I pull the fuse (fuse 30). It doesn't matter what position the headlight switch is in. It is like the high beam flash on the multi-function switch is stuck. It feels fine, but high beams stay on regardless of position, even with the truck off. The low beams (if in low beam when the truck is shut off) do go out as do the running lights after 15 or so seconds (normal) it's just the high beams. Also the high beam indicator light is on all the time (until I pull the fuse) and the fog lights will not come on until I pull the fuse. Should I replace the multifunction switch or look elsewhere?
View 10 RepliesI have a 2001 F53 chassis Coachmen Mirada. My low beams, and only the low beams, blink off and back on ea. 2 seconds, and the low beams stay on with highs on. I have confirmed with a friend who has the identical model that the lows should go off. The dip is momentary and happens regardless of anything else. The highs don't blink and do go off when they should.
The headlight switch seems to work normally. The multi function switch does turn the highs on and off as it should. Both sides behave the same. The Daylight running lights are separate and work fine. The high and lows are 2 different bulbs. Where do you think I should start checking? With previous cars I was led to believe that a headlight that goes off meant a breaker being tripped due to a short or bad breaker. I can't find a breaker to check.
I just had some custom headlights built for my truck. I have noticed if I am on low beam with fogs on, switch to high fogs go off, switch back to low, and fogs come on but highs stay engaged until I turn off fogs, the go low beam... I have heard this has happened before with other trucks and that it was called a Bambi something? And that there was a possible fix...
View 1 RepliesI was wondering if there was a DIY mod so I can have my foglights on with my parking lights and my high beams..
View 7 RepliesShould the indicator above reads "4x2, 4x4 hi, 4x4 low" light up when the driving lights (i.e. at night) switch is on?
If yes, how to change the light bulb?
2013 F250 XL with factory towing package.
My camper and boat trailer do not have turning signal or brake lights when plugged into the round seven pin trailer connector. I have tried both the connector in the bed and under the bumper. I've also connected the trailers to other trucks and the lights work fine so I know the problem is in my truck.