Ford Super Duty (1999-2016) :: 2011 XLT - Rear End Clunk On Startup
Feb 2, 2016
The last couple of weeks a new clunk has appeared on my F350, 6.2 CC LB FX4. If I've been parked for a while, when I drive off, within the first 30 yards or so there's a clunk. Seems worse when I've turned sharply out of a parking spot. Sounds like the rear diff or drivetrain... I have a locking rear diff. Is this engaged or disengaged while "at rest"? Could it be that its slow to unlock when I start?
View 13 Replies
Advertisement
When I go over good size bumps, I hear a clunk in the front tire area when my driver's window is down. It's a metal noise, like something loose.
2011 F-250 with 203K miles. Replaced shocks last year. Did this with stock wheels/tires. Something in the front suspension or axles. What should I be looking at?
View 8 Replies
When I am driving and hit a bump in the road, especially when the rear tires contact it square. I hear a clunk at the rear end. Sounds like suspension, loose tailgate...
My truck is a 2016 F250 Crew Cab Short Bed. It has a factory installed fifth wheel hitch. I have looked at the obvious, spare tire, loose bolts... I removed the tailgate and it still makes the sound. I removed the insert in the receiver, still makes the sound. No goose neck ball in fifth wheel hitch. Checked bed bolts. Cant find it. Drives me crazy.
I also have a 2008, exact same truck, 200,000 miles, no clunking. I have driven in my friends 2014 F350 Crew Cab Long Bed, it clunks. Dealer pulled a new truck off the lot today, took a drive, it clunks. Dealer can't find it and confirms there is a clunk.
View 14 Replies
I had a pretty good clunk going on and found the passenger tie rod was shot. The rest of the steer components looked fine. Fixed it and still get a nice bunch of clunks. Went over the steering again with someone rotating the wheel and didn't notice any crazy movements. The drag link twisted a bit but the joints looked solid compared to the tie rod which was completely shot.
So I decided to dig into it today. Looked again and nothing. So I took it into my back yard to drive over some humps left from stump grinding. Clunk, clunk, clunk. I stuck my head out the window and wouldn't you know it the sound seems to be coming from the rear! Took a pry bar to parts like the sway bar links, shocks, etc.... can't detect anything. Maybe a u-joint? Gotta dig in I guess.
Also my rear springs creak like nothing I've ever heard. Dirt roads it's just creak, creak, creak.
View 2 Replies
I have a 2005 king ranch and have a clunk coming from the back over bumps/heaves in the road. It doesn't happen all the time but often enough. I just replaced the shocks, that worked a little but didn't solve the problem. Now thinking rear sway bar end links? Anything I can check/inspect?
View 1 Replies
I cant get my rear seat back to fold down anymore. I was on some very rough roads over the weekend and when I went to fold the seat back down the handle doesnt move. Is there a way to fold it without? Its almost like something is jammed which may be from the pounding the truck took over those roads.
View 3 Replies
I have a 2011 F350 with camper package (didn't want it). When I drive on a bumpy road (without 5th wheel), the truck suspension does not absorb the shock. The ruts just throws the truck side to side. Really hard, so I can't go on a dirt, rough road. On one bump it poped off my rear tire cap.
My problem may be with the camper package trying to keep the truck from going back and forth.
There is a 7/16 inch steal rod going from the truck bed, around the differential, and back up to the other side of the truck. Is that the rear stablizer rod?? Can I disconnect it? What would be
View 13 Replies
I'm gonna replace my front and rear brake pads. Any tips? Do I need to pull the rotor off and clean the axel? I've watched a couple of youtube videos but they leave me with a few answers. I have all the tools, what kinda lubricants will i need? Any recommendations? I hoping I can do a flawless job without and squealing...
View 13 Replies
My '11 F250 stock w/airbags has a mild shudder when I let off the gas approaching a stop light. If I air the bags up to about 20 lbs it appears to go away, or at least is undetectable. I don't notice this if travelling at a higher rate of speed on a highway but only when slowing down from a lower speed (<40 mph). What this could be?
View 3 Replies
Where I can locate rear fender flares that will match 2011 and up f450 flares? Which flares would cover the f450 front fender flares holes?
View 3 Replies
Just became the proud owner of a used 2011 F-250 Supercab, 6.2L. Overall the truck is great but it does have a-few things that need fixing, the most annoying of which is a knocking sound from the rear passenger side cab corner. Sounds like the exhaust vibrating and smacking up against the floorboard but that's not it. Everything seems tight, even the front suspension.
The only thing I can see that may be the cause is the rear passenger cab mount seems worn. I can rotate the bottom rubber portion without too much effort and when I feel for the top rubber portion all I feel is the metal cup on the top, like the rubber has collapsed and the metal cup is sitting directly on the frame mount.
So... how many cab mounts there are for the Supercab? I think there are two on each side and two in the front. All of the information & videos I've seen describe the locations for the crew cab. Also, is it possible to replace the cab mounts and not have to mess with the ones in the front? I hear those are the real buggers.
View 2 Replies
Made a short run to get lumber yesterday and when I got home the truck smelled hot I checked it out and found a transmission oil leak at the rear of the transmission in front of the transfer case. can not really see what is leaking only has 22,000 miles. What may have happen. 2011 F250 4x4 6.7....
View 14 Replies
So the other day i opened the door and heard a super loud clunk noise come from the door and when I turned the car on and pulled hte window down it wouldn't go down all the way, only about 75% of the way so I assumed like BMW cars the window motor died but oddly it continued to go up and down just now 100% down.
Then 3 days later when I came to drive the car again the window went down to the 75% mark and now its jammed there with no movement even if I tried to lift the window up myself. Usually a broken motor allows this to happen but since it isn't budging I am wondering if its an electrical issue with the power window button more than the motor?
I say this because when i try to lower the passenger window from the driver side it works than out of no where on the 3rd time it wont move at all than 5 minutes later it will move or if it doesn't move I just go and pull the window down from the passenger side then I come to the driver side and try it and it works again than it'll stop again. So maybe its the power window control buttons on the drivers side that's failing?
View 2 Replies
My F-350 has developed a new problem. It wont start. It wont even turn over. All Electricity is on, glow plugs glow, gauges work, lights work, but when you turn the key to the start position noting happens. Some of the indicators go dark.
I even tried a jump thinking my batteries no longer handle the load. Same results. I suppose I can remove the batteries and take them in for testing. In fact, I'll probably do that now.
2002 F-350 Superduty, 7.3 Ltr, Turbocharged. 260000+ miles.
View 7 Replies
So my '99 F350 4x4 is making a clunking sound and there is a distinct jolt in the truck while this is occurring.
Symptoms: From a stop while accelerating, there is a distinct jolt and clunk. The best way I can describe the feeling is like something isn't tightened down all the way so there is a split second while inertia is generated and the "looseness" catches up to the acceleration.
When stopping, the clunk and jolt is generated when the truck comes to a complete stop. When the truck rebounds backwards a bit because of the suspension pulls it backwards after stopping, you will hear the clunk again.
I replaced the ball joints a week ago an a wheel hub bearing on the right side. I don't recall this before these repairs, but it may have been making this noise. I was more focused on the grinding from the wheel bearing so I may not have noticed the clunk and jolt then.
Where I should start looking for the problem?
View 14 Replies
2009 F350 4x4 DRW. Just replaced rod ends, drag link, sway bar bushings and end links, ball joints, and shocks. I have a clunk when the axle travels downward on bumps. The only thing I see is that the tie rod assembly will rotate easily by hand and I can make it clunk when I rotate it. It does not rotate in the ends, the ends rotate with it. Thinking this may be flopping around over a bump. Does tie rod rotate easily?
View 14 Replies
I have a 99 F-250 SD 4X4 7.3 with about 160,000 miles and still running strong. I haven't been able to troubleshoot a strange clicking noise during the Glow plug / pre start warm-up process. It seems like the noise is coming from a vacuum "relay/ actuator" ( I think that's what the part is) under the hood on the passenger's side. But again I am not a Ford mechanic, nor have I owned this complex of a truck before.
There seem to be two different vacuum terminals that both have two outlets that attach to vacuum hosing. The unit does not have a line ( or 2 ) connected to the innermost vacuum outlet. Does this need to be connected? If I put my fingers on the units outlets to restrict the noise becomes more high-pitched, then will cease to make the clicking sound sooner than if I didn't cover the outlets.
I'm unsure on the process on how to insert a photo. it's asking for a URL, does this mean I need a flickr photo account to transfer the photo? Can I just upload a JPG?
View 1 Replies
I just got my truck back from the dealership where they said they tightened the nut on my pitman arm and now when turning either left or right when I approach full lock there is a massive pop or clunk that comes from the steering box. I have crawled under the truck and watched and felt everything as the wheels turn and the draglink, tie rod, sway bar links and cv joints as well as the front drive shaft are all fine. The noise is definitely coming from the top end of the pitman arm or higher. What it could be or how to fix it? I have an 03 6.0l f250 with a 4 inch lift all new springs and new sway bar
View 3 Replies
I have an 08 F-250 CC SB 4x4 Diesel truck that has since new clunked when starting out from a stop and/or coming to a stop. I have 16k on it now and am getting really tired of dealing with it... The clunk starting is when I let off the brake and just apply the throttle. It feels like something slips and then clunk.
The clunk when stopping is the same as starting, except when coming to a stop.This is unloaded or when loaded w/ cargo and/or trailers. I know I can go to the dealer, but I don't want to un-spartan my truck for this...
View 14 Replies
I have a 2002 F-250 7.3 Powerstroke 4x4. My truck has developed a "clunk" for lack of a better term when accelerating from a dead stop. It is not a shudder as it only happens once within a few seconds of depressing the accelerator and then goes away until the next time I stop moving.
It feels like either something in the drivetrain is not engaging right away, or something is releasing, like a stuck caliper or something. From the way it feels and what I've read so far about the TC/Trans, I'm assuming it is something worn in the drive-shaft/rear diff.
But it needs brakes badly (already have all new rotors & pads ready to install) so maybe a caliper is sticking when depressed and then popping loose under initial acceleration? I think this is unlikely but possible.
View 12 Replies
Just moved into the 250 from years of 150's. Now have 98 miles and read that the tran would have noise but normal while breaking in.
whats normal, not used to this much Clunk while changing from P to D ect. More noise than used too I guess.
3.73 gears
2014 F250, 6.2 gas 2wd....
View 8 Replies
