Looking for aftermarket headers for a 2011 f250 6.2l gas job. I have the famous leak and I want to put something in that isn't going to warp. I was told shorty headers typically match up with the stock exhaust. Eventually going to put in a cat back also so true shorty headers would be sick.
View 14 RepliesHow will a muffler delete on stock exhaust sound? I don't want to remove the cat because I don't want it to be too loud. I want it to sound good but not too much whistle (considering my truck is a 2003 the whistle would be very loud) Should I just to a delete pipe on the stock exhaust, or do a cat-back 4 inch straight pipe? what will sound better? Also doing the cat back exhaust will cost a lot more.. but is it worth it? What I should do.
View 4 Repliesi cant find the dyno post but didnt the isf make more power with headers and stock exhaust?
View 6 RepliesWell I have a 2011F250 powerstroke. I recently put a 5" down pipe back exhaust on it. I ordered a 5" to 7" tip and it came in today. Problem is that it's 18" long so the only way it would work is if it exits at the corner of the truck
View 7 RepliesI have been smelling raw exhaust in the cab, especially when the weather is colder and when standing still.
I took it to the dealer and in the process of fixing minor coolant and oil leaks on the turbo, they located a small exhaust leak with visible soot on the back side of the turbo.
They tell me that there is no way to repair it and that only Ford can rebuild or repair these turbos.
2011 SD 6.7
I like the stock rims on my 03 Super, any success story about this type of rim refurbishing? Or cleaning them up? Something like stripping all that chrome plating off them for a flat universal look? Nothing fancy.
View 1 RepliesRecently bought a 2015 f250 xlt.....very impressed with it. Only thing is the wheel feel and look to small. What is the largest size i can run stock? Will 35/12.5 fit on stock 17 wheels or should i just spring for aftermarket rims at the same time? Also exhaust options for the 6.2? Remember, i need load range e!
View 4 RepliesI have a 2004 F250, CCSB, 6.0L, Fx4, Lariat.
I am trying to replace the passenger side front hub. I either have a bad hub, or I am not installing it properly. I have it installed with the locking hub unlocked and trying to turn the hub, the entire passenger side axle spins. It is also very hard to turn it. I strapped axle, and the hub is almost impossible to turn, with or with out the actual hub installed.
This is the second hub that I installed with the same results. I''m not ruling out bad out of the box, but it is the second one I installed today.
I'm replacing the passenger side manual hub on my '04 F250. I did a brake job last year and I'm sure I cleaned/inspected/lubed the hubs. I can't seem to get this one out. I have the snap ring out and with a rubber mallet, I can get it wiggle just a little. I've loaded up around where the snap ring went with penetrating oil.
Am I missing something? It's just a snap ring and the hub should just pull out, right?
I have a 2003 F250 5.4L crew cab with the 156"wb. She has just developed a hole in the stock muffler so it will need to be replaced.
I want something that is an easy-fit, has better flow, and maybe better sounding.
Fog Lamps. How do you turn them on. I have a new (to me) 2005 F-350 Crew Cab Long Box Dually King Ranch 6.0L with all the fixes, S/C Programmer, and a water filter system. 200,000 miles
How do you turn on the Fog lamps and what kind of towing MPG are you getting? My 28' 5th Wheel weighs under 7,000, and my 36 footer triple axel under 12,000.
This sure isn't my old '95 F-350 7.3L single axel XLT Crew Cab 4X4 Long Box.
I have a 2004 F250 and would like to have more light in front of me. I looked under the front to where the stock fog light would get mounted but I don't see any wire harness in that area. What is involved if I pick up a pair of replacement fog lights like the offer at LMC Truck. Would i need buy a harness? And what about a switch?
View 11 RepliesThe exhaust system from the downpipe back was stolen off this auction truck I bought, so I bought an even worse truck for parts but I'm struggling to get the exhaust off. Is there a trick to it? Does it come out going forward over the rear axle or pull out from the back? Should I just cut it and have a shop weld it back?
View 8 RepliesI am new to Super Dutys but i love them! Altho mine is not being so nice. It has the 5.4 in it. When its idling it has a stumble to its idle with a pop every now and then out the exhaust. It revs fine when its first started. If i pull out on to the road and start away easy its ok a slight miss but if i put the throttle down its just falls on its face. But if i get it up to cruising speed its ok as well. But even at cruising speed more then 1/8 throttle and it starts missing and falling on its face. What it could be? It smells like its running lean as well.
View 14 RepliesI own a 2001 F250, I bought a skid steer that weights 7000lbs and got a trailer that is 14,000lbs.
The truck was running fine, today was the first day I used it and I noticed by the end of the day I have oil dripping from my exhaust.
The dealership told me that the f250 is able to town that much weight, what caused it, as well as is it safe to continue to tow with it?
I have a early 2003 SD with the 5.4 triton. It has a oil leak on the passenger side, the oil blows back and gets on the exhaust.
I have been under the truck with the engine running looking at where the head meets the block and at where the valve cover meets the head and can not see a leak.
Sitting there running at idle it does not drip a drop off the engine but the entire underside of the truck is coated in oil.
I did notice that the depression around one of the upper valve cover bolts was filled with oil, I cleaned out the oil, let the truck run and it stays dry.
I plan on putting a catback exhaust on my 2016 F350 6.2 gas engine. I have always loved the sound of Flowmaster exhaust but over years have started to become slightly annoyed with the drone in the cab. Is there a exhaust system out there that is capable of sounding like Flowmaster but without the in cab drone.
View 2 RepliesI bought a used 2006 F150 Lariat 4x4 (5.4L) and discovered that the oil filter and filter housing did not match stock. All web searches return the fram filter ph2 but the truck had the equivalent of ph10575. It was the right filter for the housing so it's not a case of someone putting the wrong filter on the truck. The ph10575 filter is for model years 2010 - 2013. Should I start investigating whether the engine had been replaced or is this normal?
View 6 RepliesOK, so I have the brake pedal downshifting, but there is no real exhaust brake. Can I have one installed, like the latter model 2015 or even the 2016, with the button?
View 9 RepliesIs this the same thing as the regen? Got it for the first time yesterday at 775 miles. Just curious. On a related note, I've tried to run around town some with 5th and 6th locked out (speeds of around 55-60 on a regular basis, running about 2300-2500 rpms) to try to run this process...am I doing it wrong?
View 10 RepliesI'm looking to install an aftermarket exhaust system (cat-back system) on my '01 F-250/6.8L/V10. I'm looking for recommendations....Ideally, I'd love to find a system where I don't have to remove the spare tire, and still have a dual exhaust where the tailpipes exit on the side (aft of the rear tires).
View 3 Replies