Ford Super Duty (1999-2016) :: 2011 - Nav Install - Camera Redirecting?
Dec 26, 2016
I have recently upgraded the factory sync system in my 2011 f350 lariat to a factory sync with NAV. I am looking for tha way to redirect the fideo feed to the rear view mirror to the nav system, I have found the wire coors and pin locations for the radio end, just need the info if there is a way to move it in the a pillar harness on the passenger side to the radi harness.
Did ford really put 2 different harnesses in the cab if you had nav or not? Factory nav unit and factory camera (camera was in the vehicle to begin with). the radio side is pin 1 and 6 on the 10 pin radio harness.
View 4 Replies
Advertisement
Looks like a great option the Job 1 trucks missed out on. Looking into the feasibility of it. This is my first Ford so I am not really sure how the factory plans these things out.
View 14 Replies
I have recently put a platinum tailgate on my 2012 off a 2014 and for some reason the camera no longer works just wonder why this is and how I fix it....
Click the image to open in full size....
View 1 Replies
I have a 2014 F-250 6.7 crew cab. Noticed today when I put the truck in reverse there's a continuous steady beep where as before the beep was intermittent, as I got closer to the object it would become faster until it would eventually become a steady beep. Which I'm sure was working correctly. Tried cleaning the Camera lens but it didn't work, it continued the steady beep now I'm worried.
View 14 Replies
I've been wanting to install a back up camera on my truck for quite some time now. A month ago I backed into a steel pole in a parking garage and trashed my bumper, making me realize I need a backup camera I ordered a cheap ebay camera and 30 feet of extra power and video cable for the install.
Down the road I'll order something better but for now I'm working with a cheapo 15 dollar camera I know where I'm mounting the camera and where/how I'm running the cables, I'm just not sure how to get my head unit to switch automatically when I engage the truck in reverse. I have a pioneer double din touch screen radio as seen here on crutch field.
[URL]...
View 14 Replies
I installed a Hopkins back up camera early last year. The original double sided tape that holds the monitor to the windshield didn't hold up long. Tried some of the gorilla double sided tape. A couple weeks max. Then I tried the 3m double sided tape. It would work a month or so. Did good all winter, but now I'm going to have to redo it for a 4th time already this year. It sticks to the glass, it's pulling loose from the plastic mount made onto the monitor.
View 3 Replies
I would like to add a second backup camera to my 2016 F-350 Super Duty to assist when hooking up to my fifth wheel. It is a Crew Cab with the Factory Tonneau Cover so my view of the hitch is blocked. I would like to add the third brake light high mount camera and be able to toggle between my OEM/Tailgate Camera and the High Mount. I have found a couple that claim they will work but both require tapping into the main connector on the back of the display, but not quite sure how to open it up. Accessing the connector is not a problem, just getting it apart without breaking it is the question. The "Lockpick" system has not been tested/certified for the 2016 model.
View 3 Replies
I left town and accidentally left the tailgate on my 2011 F250 SuperDuty unlocked. It was stolen.
Found a replacement, replaced the broken handle, installed new key lock, transferred to camera and plugged it in. My rear-view mirror is not receiving the signal, just a blue screen. Is there something else I need to do to complete the process of connecting the camera.
View 7 Replies
I have a 2013 F350 Lariat. Recently, the backup camera has stopped working about 1/3rd of the time. When it doesn't work, a yellow triangle icon appears on the screen with " Camera unavailable. See dealer." The dealer has checked it, twice, and is unable to locate the problem.
View 13 Replies
On one of the trucks in work, the salt has corroded the truck side plug for the reverse camera in the tailgate. Because of this, the camera no longer works.
Is this part of the whole rear wiring harness, or it the tailgate plug a separate pigtail that can be replaced? If it is a separate part, what is the part number so I can order it?
View 1 Replies
First tech post for my new truck. I just bought a hold-over but new 2015 F250 XL Supercab 2wd and love the simplicity of no unwanted options. That said, there are two features I am adding. The first is perfectly straightforward, cruise control (swap button cluster and have the function turned on by the dealer). The second is a tiny bit more involved, back-up camera, in mirror display with bluetooth hands-free (I like the simple AM/FM radio because I can work it all with gloves on).
So I basically need three things from the truck and my research has been inconclusive on a couple of things because most of the threads are for 2014 or earlier. I think I can pull switched 12V and ground (pin 1 and 4) plus reverse lights (center, or pin 7) all from the the trailer wiring harness. It appears these are not affected by the canbus load restrictions of other places to tap reverse signal (remember, XL so likely nothing in the overhead console for the auto-dimming rear view mirror). Are there any challenges with this when I do hook up my enclosed trailer or when it is not hooked up regarding the trailer brake controller/anti-sway?
I already found a good youtube video for how to route the wires so I think this is my primary challenge at this point.
View 14 Replies
Dome light stays on drive over 15 mph lights turn off back up camera works when lights off lights on no back up camera 1999 f350 super dutuy
View 1 Replies
I've just bought a new 2016 SD xlt. The only extra I wanted that is missing is the factory trailer brake controller. The dealer told me it had to be programmed. I was expecting plug and play and planned to do it myself till they told me that. Is this true?
View 14 Replies
I want to install a set of upfitter switches but my truck didn't come with them...so I bought the switches and the relay/wire harness as well...I cannot find any good information on where to mount the relay and where an extra plug on that harness goes too. I have found the wires that attach and go through the firewall but I am not sure where the rest of this mess goes...my truck did not come with the wire harness already installed...
View 4 Replies
My dad is looking to purchase a tuner from 5-Star for his 01 Super Duty. He's leaning towards splurging on the Livewire 5015. I know the unit comes with a suction cop, but I was curious if anyone has come up with something cleaner. I searched, but didn't find anything.
Any install pics or ideas?
Mike
View 2 Replies
I just purchased 4 front and 2 rear Bilstein shocks for my F350 and will be installing them today, but my question is I have seen them mounted 2 ways (With the rubber boot up and also inverted) which is the correct way?
View 5 Replies
I am looking at a 2016 F350 that I found on a local dealers lot. It has most of the options I wanted MINUS the Rearview Camera.
It is an XLT Reg cab so I do not have the display screen (When built with this option installed, the display would be in the rear view mirror, not the display screen.)
So I am wondering if it is even possible to add this option after the truck was already built and have the dealer install it? Or is it one of those options that would have to be done before build/assembly?
View 10 Replies
We got an F250 in June and had an ARE CX series cap installed on the truck yesterday. We didn't realize the installation of the cap would mean we lost the review camera when the tailgate was removed (DUH). We loved the review camera for hooking up our trailer and are wondering if there is any way to reinstall it on the cap. Or, purchase another camera and integrate it into the existing Ford screen......with the guidance lines?
View 2 Replies
So I've had this WAAG brush guard laying around for a few years and figured it was time to do something with it. Of course it was bought with no mounting brackets. I had found a lower gear from a Fisher MM1 plow. Tossed the in the truck and started from there.
Broke out the cherry picker and started lining stuff up. Drilled some holes and bolted it up. It's all bolted up but I still need to take a piece of 2x3 angle and weld it to the lower plow mounts to tie the bottoms together and create a step.
View 2 Replies
Just installed a 4" lift sunday, with a BDS drop pitman arm and then i retorqued it to 185 ft/lb. I now have this extremely low speed (<2mph) or stopped clunking whenever i turn the wheel. I just replaced the upper and lower tie rod that goes from the pitman arm, and its still doing the same thing. Steering box is shot?
Clunk after lift install - YouTube .....
View 5 Replies
I have a 2010 F250 and wanted to power a dash camera using the upfitter switches. I purchased a 12volt wire, but am unsure on where to wire it so that it will only power up when the ignition is on..
View 7 Replies
