Ford Super Duty (1999-2016) :: 2011 F350 - Towing Mirrors Won't Extend
Dec 22, 2016
I have a 2011 F350 with the towing package. I got it used as it and it was a northern truck. My towing mirrors won't extend in or out. They fold and unfold just fine. When I press the button to telescope them I can hear the motor running so I know the fuse is good. I took the glass off the mirrors and scraped some salt out of the joints. I sprayed some lube on the joints as well but still no luck. I also tried forcing them but not too much to avoid breaking them.
View 1 Replies
Advertisement
How hard is it to install heated towing mirrors on an 01 f-250 7.3L?
View 3 Replies
I know there are tons of threads on this and ive spent hours reading through them. but there are a few differences to mine.
2005 F350 6.0l regular cab long box. 4" lift on Duratec 33". Wheels balanced, driveshafts balanced, all u-joints checked and 1 was replaced (made no noticeable difference), all new brakes and rotors recently(due to wear)
When im not towing, vibration is noticeable between 60-65, but its only slight and i can live with it. Its felt in the seat and not the wheel.
There is also a very low grinding/pulsing feeling that happens as i am slowing down from highway speeds starting at around 10 mph until I completely stop. Its not the brakes and feels driveline to me. Can only be felt at these very low speeds while decelerating/coasting. Feel it in the seat and not the wheel. Not the end of the world but i have a feeling its related to my high speed issues. It is not felt on acceleration and I don't feel it when I am moving around parking lots/etc. ONLY when decelerating from highway speeds.
When I am towing the vibration randomly gets really bad right around 65mph the whole truck shakes and its very uncomfortable. It doesn't matter if I am on the gas or not, hill or no hill. If i slow down to 60 it goes away. It is very rhythmic with road speed (3 pulses with a slight pause)
Been doing a lot more towing lately and its bugging me. I keep falling back on tires, but not quite ready to bite the bullet on new tires as the ones on it still have tons of life left.
View 6 Replies
Fog Lamps. How do you turn them on. I have a new (to me) 2005 F-350 Crew Cab Long Box Dually King Ranch 6.0L with all the fixes, S/C Programmer, and a water filter system. 200,000 miles
How do you turn on the Fog lamps and what kind of towing MPG are you getting? My 28' 5th Wheel weighs under 7,000, and my 36 footer triple axel under 12,000.
This sure isn't my old '95 F-350 7.3L single axel XLT Crew Cab 4X4 Long Box.
View 14 Replies
I recently got a 2009 f350 lariat, the mirrors have the "heated" emblem on them but for the life of me I cant find a switch anywhere to turn them on, are they automatic?
View 8 Replies
While cleaning the door handles the switch to extend and retract the side view mirrors hung was depressed and evidently got stuck as it was still pressed in. My hope is that this just blew a fuse and not burn up anything. The mirrors still fold and can be adjusted just not extended. Is there a fuse specific for this that may be blown?
View 2 Replies
How to disassemble the power fold mirrors on my 2011 F250.
The mirrors work in every way except they will not fold in or out. You can hear the motor start but then stops right away. It does not sound like the gear is stripped just that the motor is stuck some home. It happened to both mirrors about the same time.
I was going to take one apart and see if there is a issue. I can't see there being a electrical issue, but maybe, since the driver side starts then stops within 1 second. It's hard to tell about the passenger side since the switch is on the drivers side.
View 10 Replies
08 F-350 Lariat. Folded mirrors in twice today. Second time they would not come back out. After four hours the fold function has not returned. As I read Owner's Manual, if it's a fuse it should take out power to driver's seat . . . correct? All other mirror functions including telescope seem to work normally. So if I've identified the fuse correctly what else could it be? Fold relay? Switch? Where is the fold relay located and how can one test it? What pins on the switch are the fold pins? I just looked at power distribution box schematic. Power fold mirror relay fuse is there. Apparently the only function it has. Better go check it out.
View 5 Replies
I'm replacing tow mirrors on my 2004 F250 with 2008 mirrors. Both are factory Ford mirrors. Need wiring diagram since connectors and wires are different. They both have power mirrors, turn signals, heated mirrors, but are not power retract or fold.
View 1 Replies
Came out to start my truck today a hit the key and got nothing. After I settled down from being upset about my truck already giving me trouble (bought it in Nov and had 25k miles on it, 35k now) and that I should have stayed with a Chevrolet, I was able to start it by crawling under and jumping the started with a screwdriver. The truck started up no problem and got me home where I did some troubleshooting. Looks like I dont get solenoid power at the starter (just main power), the relays and fuses checked out, anhe d it looks like the key is still programmed.
I had been getting what seamed like a delayed start every now and again that was going on for a while, but thought it was just me. The next items I thought that may be the culprit are the neutral safety switch or the ignition switch. The gear selector seams to work fine and it wont start in either P or N, the backup camera turns on and nothing seams to be incorrectly working on that account. Also, the truck is a 2011 F350 Crew Cab 4wd Lariat with the 6.2 gas motor.
View 10 Replies
I bought a 2011 F350 that was in a collision. I have done collision repair before but I have not had to deal with air bags... Both driver wheel and passenger bags deployed. I see some for sale on EBAY for around 300 used....do I just by them and install them? Is there a reset or something else I have to do? I see some sell them with the controller as well...do I need that?
View 14 Replies
I have an 11 F350 6.7. It has just under 200K miles on it. Yesterday I changed the oil. Very uneventful. Today however, I was driving home, about 100 miles, and my truck's temp spiked. Not like a little spike, but jumped to the 3/4 mark(if there was one) then slowly kept rising to to the overheat mark. I pulled off onto the hard shoulder waited an hour or so to let it cool down, then finished the drive home. All the way home my temp gauge seemed like it was on some sort of drug. It would jump a needle width when I would have to accelerate, then slowly cool to normal after I got up to cruising speed.
When I got home I checked the oil level and it was spot on in the "normal" range. I haven't used a different type/brand/weight of oil in the last 100k miles. Did something just give out on my truck? I had the coolant flushed and replaced at the dealer within the last 10k miles. Up until this point this truck has been exceedingly reliable. I pull a 13k 5th wheel once a month and drive about 40k-ish miles a year.
View 9 Replies
I have a 2011 F350 with camper package (didn't want it). When I drive on a bumpy road (without 5th wheel), the truck suspension does not absorb the shock. The ruts just throws the truck side to side. Really hard, so I can't go on a dirt, rough road. On one bump it poped off my rear tire cap.
My problem may be with the camper package trying to keep the truck from going back and forth.
There is a 7/16 inch steal rod going from the truck bed, around the differential, and back up to the other side of the truck. Is that the rear stablizer rod?? Can I disconnect it? What would be
View 13 Replies
2011 F350 with fluid leaking in through the firewall. Does the Hydro booster have to be replaced or is there a gaskets or seal on the rod that goes to the brake pedal?
View 14 Replies
I feel a vibration and hear a rattle/grinding noise intermittently in the front driver or passenger floorboard only when the truck is cornering AND starting uphill or downhill. The vibration lasts a second or two and seems to be directly related to throttle/rpm acceleration while cornering and not something just loose and clunking around.
Dealer could not reproduce but it just happened again yesterday a couple of times in city traffic after dealer inspected and greased front end zirks.
What should I be looking for and how would you go about getting this resolved? It started happening in the last couple of months and never made a sound prior. Truck is in year 4 of 6 year warranty so I want to tackle now, but I need better understanding of problem.
View 10 Replies
what is the best computer chip for a 2011 F-350 to get better gas mileage?
View 4 Replies
I have a 2011 F-350 6.2L that has extremely hard shifts from 3 to 4 going up and 2 to 1 going down. Sometimes on downshifts it feels like something has ran into the back of the truck. I had the computer updated when the truck had approximately 40,000 miles on it and he assisted a little bit. The truck now has 140,000 miles and it is back to shifting horribly. I put it in the shop at the dealer on 30 December 2013. The dealer says that the problem is that the shift solenoids need to be replaced but that they are not available. The truck is still sitting at the dealer and I am being told that the parts should be available mid February.
View 10 Replies
So my vents stopped actuating to different positions in my 2011 6.7 F350. I read that it could be a vacuum pump or solenoid issue. In any event, I turned 4x4 on and went down the street and made a u-turn - 4x4 seems to be on as the truck wants to hop the outside wheel when turning. I want to check the vacuum pump anyway but for the life of me cannot find it anywhere. Moreover, google turns up nothing which is making me start to believe the new trucks have a completely different system.
View 9 Replies
I just bought a 11 f350 powerstroke. CC lariat 4x4 with 70k miles. Whenever i turn off the truck abt 30-45 seconds later a humming starts and continues for abt 1 minute. Sounds like a pump or a release of air? Is this a normal function or should i have it checked out. I've searched around but found very mixed answers.
View 4 Replies
2011 F350 loaded. Stuck on vent mode. Found actuator can feel it trying to move but something is stuck. Tried to remove the actuator but not enough room between the motor and a steel bracket welded in to the dash. (Not removable). Do I have to remove the dash ? (I suspect something fell inside and is stopping the big vent door from moving as i did pull the motor far enough away to move all the door except the vent door.
View 2 Replies
Just picked up a 2011 F350 6.2. (Couldn't take another day with my 6.0 which I'm now selling) New one has a few minor snags that I want to clean up. First one is the radio screen is black. Blank. Nothing there, although the radio does work. Seller had it tuned to a station. It has steering wheel controls. Here's the radio. Can this be repaired?
View 14 Replies
