Ford Super Duty (1999-2016) :: 2011 F350 Engine Braking / Downshifting Not Working - No Tow Engage
Nov 19, 2016
First off I want to say I love my 11 f350 6.3 srw she's a awesome truck. I pull a small 7x14 trailer for my biz..
(3600-400) is the usually weight, I always use my tow feature. One day last week I start out hit my button in go, but I notice the engine braking/down shifting wasn't working. The trans still shifts smooth n normal the light is on the dash but no tow engage.
I check the transmission wire plug to make sure it'd getting a good connection, it does. I take the rubber boot off next to the shifter look at those wires they look ok not pinch or nothing, so I'm stumped.
View 6 Replies
Advertisement
I can not hear the radio in my 2011 F350 XLT. I don't know what radio options there were for the XLT but mine has a Sync USB port, Bluetooth, steering wheel controls, CD player but it does not have a big display or touchscreen or anything like that.
When I try to adjust the volume with either the steering wheel or the radio dial, the indicator shows the volume is at half but the volume will not go up or down. I can hear nothing. All other buttons appear to work.
Have Inaccidentally gotten into some more that doesn't allow it to play any sound or adjust volume or is something just flat out wrong?
View 4 Replies
A quick trip from Tulsa to Dallas and back over the weekend...1st time the 2011 F350 diesel dually has been on the highway in a few months. Going down Friday night the speed control worked fine but on the trip home Saturday, the speed control will turn on....yellow light on dash is on. Press SET, the speed control light turns green, but it will not maintain the speed... just like it is not on at all. Did not take time to stop and shut off the engine to try to reboot, and I may go out now and it will work just fine... But, hat might be going on?
View 1 Replies
I have a 2005 F350 diesel, 54000 miles. I was at a red light today, engine is idling normaly.. light turns green and I step on the throttle and get nothing. My truck is rolling (in drive) as if it were in nuetral. I shut the engine off and it does not start for 10 to 15 min. Then it fires up and seems to be running as if nothing happened.
View 1 Replies
I own a 2011 F350 dually with the 6.7 in it. It has 136000 on it and zero mods. I was driving over the weekend and the traction control light, brake light, and the ABS lights all came on and the information center displayed Check Brake System. We were towing our 5th wheel when this happened. The brakes on the pickup and trailer both work and we have no problems stopping. About every 15 minutes or so this message pops up and it chimes again. My insight is reading a U0418 code. We are stopped now and the code and alert message is still popping up without the trailer. All fluid levels are where they should be.
We are also getting a check engine light and my Insight is reading the codes P2020 and P20E8.
I can reset the codes dealing with the reductant leakage and low pressure, but not the codes dealing with the brake system.
I have had my pickup in to 2 different ford dealers for these issues and they cannot find anything wrong. I did notice that this time when the Check Brake system warning appeared that the pick up started lunging a bit, we lost power to the stereo and the windshield wipers came on. Our fuel mileage has remained the same and the pickup still tows like a beast.
View 1 Replies
My 4wd doesn't engage on my 04 powerstroke. The dash light doesn't come on. I replaced the relays, switch, and 4wd module, I checked the fuses, all fuses are good, but fuse 31 doesn't get power to it. The voltage at the relay block reads 12v with the fuses out, but drops to around 7v when they're plugged in. I have no power to the Tcase (.15v).
View 11 Replies
I was using 4x4 High the other day and it was working just fine. Now today, I was at my first parking lot to plow and used the ESOF to shift into 4x4 High and it did not engage with the hubs being in auto mode. The lights on the dash show up indicating that I am, but I am still in 2wd.
If I manually lock the hubs, it engages 4wd high. I tried the same thing using the ESOF to switch over to 4x4 low and it does NOT engage either.
I also noticed that heater blower was switching over to full defrost even though I had it set on the floor setting (manual heat climate *****).
Does this sound like a vacuum leak? I haven't had a chance to test the lines yet. Btw, this is my second work truck and not the one listed in my signature below. It's a 2006 f-350 6.0 xlt.
View 5 Replies
This is my "03 F350 single wheel 7.3 automatic 4x4. For quite some time now I have to manually lock the front hubs. Maybe it would work automatically, maybe not, and now I always have to manually lock the hubs.....but I can live with that. The problem now is that the selector switch on the dash isn't working or something else is preventing the transfer case from going into 4x4. The 4x4 light on the dash also does not come on.
I have checked all the fuses and they are good, I do not have a owners manual so I don't know what to look for in the fusebox. Perhaps it is on a relay? Also, I would like to check the dash switch for power coming and going but how do I get the switch out of the dash? I'm afraid I'll break the bezel around the switch if I pry too much.
View 1 Replies
I've noticed that my 06 f350 will pump the ABS when pulling in muddy spots, mostly in 4x4? It will even start to cook the pads after a bit of spinning. I'm not doing any serious off-road stuff, just trying to pull random farm equipment/trailers. Do these trucks have some sort of traction control that I don't know about or dose my ABS think I have my foot on the brake all the time?
View 9 Replies
2011 F250 6.7L Powerstroke, automatic tranny, Electric Locking Diff
When I engage the On the Fly 4WD switch the indicator panel says "shift to 4x4H in Progress" and everything seems fine but if I am not moving forward when I shift the 4WD doesn't engage. The engine revs up but nothing happens. When I release the accelerator the transfer case bangs like it is going to rip out of the truck. In reverse it is even worse. I am lucky that I didn't gun it or I could have done allot of potential damage. All my other Ford 4WD vehicles engage immediately from a full stopped position. This is quite of troublesome because if you have to shift when your stuck in the mud, your still stuck. If I shift while moving forward it works just fine.
My question is: Does this particular model (2011 F250 6.7L Powerstroke with an automatic tranny) have to be moving forward in order for the 4WD to engage?
View 3 Replies
I'm having trouble finding the source of a vibration in the front end if my 1999 f350 super duty 4x4. The vibration is felt all the time but worse when under 40mph, while braking, and especially when turning.
I have replaced the rotors and brakes, tie rods and Drag links since the issue started but no change. In the vibration. What should I check next?
View 4 Replies
Truck is an 03 F350 with the 6.0. It sometimes sounds like the shift motor on the transfer case is trying to engage. It has the vacuum system which is blocked off. Warn aftermarket hubs. Switch on the dash with 2wd, 4wd and 4 low.
It's kind of an off and on thing. Try to engage for a few or more seconds then nothing for awhile then repeat. It sounds like it's at the transfer case. It could very well be coming from firewall/engine bay area as well. Is there anything between the dash switch and the motor?
View 2 Replies
I tow 10-15K; 6-10x per month with this truck. I can feel the braking ability starting to drop off so I want to get them done pretty quick. I am more or less happy with OEM performance but if there is a better value, and with my SO starting to haul the horse trailer around.. I wouldn't mind upgrading.
What is worth the money? I'm fresh out of school trying to figure out what the best value is.
Calipers?
Rotors?
Pads?
Brake Lines?
What would provide me with a noticeable improvement without breaking the bank?
Last question, could worn rotors cause vibration/shaking in the steering (primarily when turning ramps) at 50-60mph? Tires are brand new, problem showed up before they were replaced.
View 7 Replies
I am having some issues with my 2003 f250 6.0l 4x4. I cannot get the 4x4 to engage. There are no lights on the dash and no power to the switch other than the light. It doesn't matter if I have the hubs in lock or auto. It just seems like i have no power to the system. I have check all the fuses and they all check fine. I also check the transfer case motor and it seemed fine. I must be missing something. This truck is worthless without 4x4.
View 14 Replies
I have an 03 F350 4x4 dually. Was pulling hard left at low speed when braking (front). Replaced pads, calipers, rotors, hoses and tires. Still the same problem. You can feel the abs activate right before it almost locks up the left front brake (basically will pull the steering wheel out of my hand). BTW the abs light does not come on.
View 2 Replies
So yesterday I drove across town and back to pick up a piece of lawn equipment. About a 30 min hwy drive each way. On the way there I was in stop and go traffic for about 15mins and noticed toward the end the truck would pull hard to the right when stopping hard and sudden. I figure it was my steering. Been having issues with horrible steering since my last alignment and adjusting the caster. Truck wanders, steering feels loose, will not fully recenter, and feels like it binds then releases toward center position. That's a different issue, I assume. I stop on the way to get some cash and everything is normal. Pick up the equipment and drive back. When coming to a stop the truck will pull towards the right and when I suddenly stop it now pulls to the left.
I get home and get out and smell something burning and hot. Grabbed my IR thermometer and hit both front wheels. Passenger is 150f brake rotor is 175f, drive is 280f brake rotor is 580f. So im assuming my caliper seized up or started to stick. I plan to jack up the front and look at the hubs and calipers. Any other test I can do to narrow down the culprit. I am thinking the hoses may be collapsing especially since I had to disconnect and flip them during the lift. Just weird that the hard pull would switch sides if only the drivers was sticking. Could my bad steering and brake issue be related? I have also noticed my braking power has dropped recently. Brake fluid looks good but power steering smells like brake fluid and is orange.
Pulled the tire when I got home today. A little resistance when spinning by hand, more than there should be. Pulled the caliper and greased the slides. Found out my hub is bad so those are on the short list now. Reassembled and had my wife hit the brakes while I spun the tire. Progressively got harder and harder to spin. Was looking at the brake hoses, how much should they move and ''shrink'' when the brakes are applied? Also if I hit the brakes repeatedly while rolling down my drive way the pedal gets harder and the truck doesn't want to stop and the pedal will slowly push all the way to the floor. Now I am just lost at what is causing my braking issue.
View 10 Replies
Came out to start my truck today a hit the key and got nothing. After I settled down from being upset about my truck already giving me trouble (bought it in Nov and had 25k miles on it, 35k now) and that I should have stayed with a Chevrolet, I was able to start it by crawling under and jumping the started with a screwdriver. The truck started up no problem and got me home where I did some troubleshooting. Looks like I dont get solenoid power at the starter (just main power), the relays and fuses checked out, anhe d it looks like the key is still programmed.
I had been getting what seamed like a delayed start every now and again that was going on for a while, but thought it was just me. The next items I thought that may be the culprit are the neutral safety switch or the ignition switch. The gear selector seams to work fine and it wont start in either P or N, the backup camera turns on and nothing seams to be incorrectly working on that account. Also, the truck is a 2011 F350 Crew Cab 4wd Lariat with the 6.2 gas motor.
View 10 Replies
I bought a 2011 F350 that was in a collision. I have done collision repair before but I have not had to deal with air bags... Both driver wheel and passenger bags deployed. I see some for sale on EBAY for around 300 used....do I just by them and install them? Is there a reset or something else I have to do? I see some sell them with the controller as well...do I need that?
View 14 Replies
I have an 11 F350 6.7. It has just under 200K miles on it. Yesterday I changed the oil. Very uneventful. Today however, I was driving home, about 100 miles, and my truck's temp spiked. Not like a little spike, but jumped to the 3/4 mark(if there was one) then slowly kept rising to to the overheat mark. I pulled off onto the hard shoulder waited an hour or so to let it cool down, then finished the drive home. All the way home my temp gauge seemed like it was on some sort of drug. It would jump a needle width when I would have to accelerate, then slowly cool to normal after I got up to cruising speed.
When I got home I checked the oil level and it was spot on in the "normal" range. I haven't used a different type/brand/weight of oil in the last 100k miles. Did something just give out on my truck? I had the coolant flushed and replaced at the dealer within the last 10k miles. Up until this point this truck has been exceedingly reliable. I pull a 13k 5th wheel once a month and drive about 40k-ish miles a year.
View 9 Replies
I have a 2003 Ford F-350 6.0 it's srw lariat edition it has Manual hubs but electronic 4x4 switch I have changed all fuses and relays but still the light won't come on I've tried manually locking the hubs and still nothing....
View 1 Replies
I have a 2011 F350 with the towing package. I got it used as it and it was a northern truck. My towing mirrors won't extend in or out. They fold and unfold just fine. When I press the button to telescope them I can hear the motor running so I know the fuse is good. I took the glass off the mirrors and scraped some salt out of the joints. I sprayed some lube on the joints as well but still no luck. I also tried forcing them but not too much to avoid breaking them.
View 1 Replies
