I've got a 2008 Ford F250 Superduty Crew Cab. My problem is that the center console of the front bench seat is loose. I keep it folded down nearly all the time and any pressure on the front left corner causes the rear right corner to pivot up.
View 3 RepliesHave a 2008 F350 Lariat Crew cab and I don't have any power coming to the center console power points. I unplugged the cig lighters and check the harness itself but no juice. Fuse 41 and 43 test good am i missing another fuse not listed?
View 5 RepliesJust got a 2008 F-250, truck has the center console jump seat and the console lid is missing. Can you just buy a new lid or do you have to buy the whole thing? Cost? Places to buy?
View 4 RepliesI am considering the purchase of an 08 Super Duty, however the truck I am looking at has a center console between the front seat. I need seating for six and like to swap a leather middle seat with fold down armrest for the console that I can't use. I don't want to buy this particular truck if I can't somehow get the seating issue corrected. You can view the truck at this link. 2008 Ford F-250 ...
View 9 RepliesI am wanting to take off the center console lid to recover it. The only way I see to remove just the lid from the truck is to hit the rod out that is in the hinge. I was hitting pretty hard with a punch and it wasn't moving. I don't really want to break it so I'm asking if there is a different way or if I just need to use more force?!
View 4 RepliesJust purchased my first ever Ford truck a few weeks ago, it's a 2012, and where the drivers right arm rested on the center console, near the cupholder, it's perpetually sticky. At first i thought it was just filthy, but after thoroughly cleaning it, it just stays sticky.
View 12 RepliesLooking to swap out my center console for a center jump seat in my 2014 F350 xlt. Mines has gray cloth interior. Can this be done? Need to swap their seat for a console?
View 5 RepliesI'm trying to remove the center console from my 2016 f350 lariat cc. I have both drivers and passengers seats out and all the obvious bolts removed. I'm still not able to remove the console. I know I'm likely missing just a few bolts as its really loose.
View 8 RepliesWhen opening the center console at night, it is obviously pitch dark in there. I know that I could turn on the dome light, but 1. i'm lazy and 2. that still does not offer a whole lot of light.
I want something that will come on when I open the lid, and then go off when I close it. I do not really want anything on a switch. So i'm thinking about setting something up like the glove box with the thing that pushes in and the light goes out, you all know what i'm talking about. I would not think it would be too hard to wire up.
I have the 60/40 seat with fold down "jump seat" that has the 2 cup holders and console. In the down position, it squeaks something fierce on any kind of a bumpy/rough surface. On paved roads it's fine.
View 11 RepliesI was wondering how do you remove the cup holder part of the console dose it just pop off or are there metal clips or screws hidden some how?
View 4 RepliesI need to replace a bulb (I hope) in my center clearance light and need to remove the amber lens cover. Lots of info about installing for those without but I haven't been able to find anything about removing the lens cover so that I can replace a bulb. I'm working with a 2008 F-450.
View 6 RepliesOk. I wanted to pick the minds to make it easier. In the photos the lower steering linkage is loose (bottom bar with ring on the end connected to knuckle) and needs replacement. To fix this is it just a bushing inside? Is it unscrewing the end like replacing a tie rod?
2008 F350 CC DRW
My rear wheel bearing are a little loose. This afternoon while diagnosing a squeak in the back I found this. While pushing the truck side to side there is a clunk and when you lay your hand on the tire you can feel it, bearings are loose. Nothing during the operation of the truck to give this away, truck runs and drives as it should but I need to check it our before something does go wrong. What I'm looking for is a torque / preload that the rear wheel bearings need to be set at.
View 2 RepliesI have a jump seat in my 08 f350 and am looking for a center console. My interior is black and tan and the jump seat is all black.
View 3 RepliesI have a 2008 F-450 Lariat 6.4 4x4. I recently started noticing the front driver side wheel (best I can tell) wheel makes a noise as though it's binding uo when turning either direction, and I can feel it as well. 4wd is not activated and the hubs are in auto. When the front end is off the ground, I rotated the wheels and they spun independently unless the hubs were locked. I noticed what appear to be seals on both the driver and passenger side hanging loose (see pics). What this might be? I recently used the 4wd when we visited White Sands National Monument while pulling a 5th wheel RV.
View 9 RepliesJust bought this '08 F250 CCSB 4X4 5.4 Problem is the steering seems heavy, it tends to wander at higher speeds and won't return to center after a turn. I've searched on here and found a few possibilities (axle u joints, ball joints, steering gear, etc). I have an appointment with the dealer on Friday to fix it under warranty but he is convinced it's the u joints in the steering shaft seizing. When my F150 steering shaft began to seize, it would be hard to turn then break free then be hard then break free and this is not what is happening on the SD. I haven't had a chance to check the front end myself but not sure how you would check the axle u joints if there was no play in them. How would you check to see if they were seizing up.
View 3 RepliesHow to remove the overhead console on a 2012 F-250 ? I would like to tap into the wiring to power my radar detector.
View 7 RepliesAt work weve got an 02 F250 Lariat CC, and the overhead console has gone out. I looked in the owner's manual, and there was no fuse listed for the overhead console. Is there anything that I can do to fix it, or should we just go out and buy a new one?
View 14 RepliesI am looking at a left over 2015 F250XL, 6.2L, 4X4, Short Bed. It is a new vehicle, 320 miles, it came in a dealer swap so that was the transfer miles. Truck was built in December 2014.
Question: It has bucket seats with no console. Well, there is some small plastic thing that is a cup holder between the seats, but NO arm rest center console. Is this normal? Or did someone take out the center console/arm rest and swap it into something else, and just found something to bolt to the floor? The one that is there appears it could be a factory piece, but man alive is it cheap.
Also, why no fold up arm rest attached to the seat??? Ford did this in the past. Is there a bolt hole to attach an arm rest from another Ford bucket? One that you could fold up and down maybe?? You would have to make a hole in the fabric to use it, but someone should be able to go feel around for a threaded hole or something.
Like most older superduty trucks my overhead console doesn't work. I removed it and got the thing apart. Low and behold there were 4 of the resistors loose in the plastic housing. Looking for a diagram that shows the location of these so I can resolder them? My truck is an 04 lariat with sunroof which seems to be different than non sunroof trucks.
View 2 Replies