Ford Super Duty (1999-2016) :: 2008 F350 - Swap Middle Jump Seat For Sender Console
Oct 11, 2013
I have a jump seat in my 08 f350 and am looking for a center console. My interior is black and tan and the jump seat is all black.
View 3 RepliesI have a jump seat in my 08 f350 and am looking for a center console. My interior is black and tan and the jump seat is all black.
View 3 RepliesI am considering the purchase of an 08 Super Duty, however the truck I am looking at has a center console between the front seat. I need seating for six and like to swap a leather middle seat with fold down armrest for the console that I can't use. I don't want to buy this particular truck if I can't somehow get the seating issue corrected. You can view the truck at this link. 2008 Ford F-250 ...
View 9 RepliesLooking to swap out my center console for a center jump seat in my 2014 F350 xlt. Mines has gray cloth interior. Can this be done? Need to swap their seat for a console?
View 5 RepliesGot an 03 f250 supercab, and looking to get rid of the old front bench seat for 2 regular front seats and installing a big middle console, will this be kinda hard? I got in my truck now the driver seat is seperate from the 2 seater bench seat and it has the flip down middle console to where you can flip it up for somebody to sit in the middle or flip it down for the cup holders etc.. I want to get rid of that and just have the 2 front seats and an big middle console. I think some of the 1998-2003 f150 come with this set up
View 3 RepliesI have the 60/40 seat with fold down "jump seat" that has the 2 cup holders and console. In the down position, it squeaks something fierce on any kind of a bumpy/rough surface. On paved roads it's fine.
View 11 RepliesI was wondering if this is possible, I have a 2008 F-250 6.4L and a 2003 F-350 both crewcab longbox, the 08' F250 has a ruined engine & great cab/box, my 03' F-350 is fine except it has substantial body damage - Is it possible with some welding & magic to get a 2008 cab onto a 2003 6.0L F-350?
View 4 RepliesHave a 2008 F350 Lariat Crew cab and I don't have any power coming to the center console power points. I unplugged the cig lighters and check the harness itself but no juice. Fuse 41 and 43 test good am i missing another fuse not listed?
View 5 RepliesTruck is 08 f350 lariat with minor issues. Both seat heaters don't get hot. Click is heard under driver seat. Both dash lights come on. No heat. Steering wheel fan control won't turn fan up. Turns it down fine.
PO put aftermarket HID with ballasts and bulbs and factory light housings. Factory housings scatter light and they are waaayyy bright. Can't drive anywhere with out blinding someone. What aftermarket projectors will work with HID set up I already have?
Can an f-450 with a blown 6.4 diesel received an transplant from an f-350 V-10.
How much would need to go over from the f-350 to f-450?
After a 7 year love affair with our 2005 6.0L Excursion, we bought another 6.0L today - a 2006 F250 Crew Cab. It came with front buckets/console, and the used car lot (all diesel trucks...) was nice enough to let us swap the seats out with another 2006 F250 Crew Cab on the lot that had the front captains' chairs with the center seat.
Their upholstery guy did the work with the captains' chairs, but for liability reasons they wouldn't bolt the jumpseat in, since the truck we bought didn't have the studs in place. So, they sent it home with us and we're faced with putting it in. No problem, right?
Well... we found the place for the bolts to go, and thought we were home free. BUT... (see photo) - what have we done wrong?? The first photo (driver's side bolt of center seat) is fine, but the passenger side bolt hole is too close to where the front passenger seat needs to bolt in.
I have a 2003 f350 v-10 drove it yesterday to get fuel, went to start it after fueling. No start, no lights dash was gauges were acting odd, and clicking under dash from behind fuse box. did get it to start after a while, put my foot on brake to go into drive, never made it ... truck died I do have remote start system thought it was that with the brake pedal issue. disconnected complete system. no change
Had it towed, home now no nothing, connect battery and just clicking from under dash no start ? not battery, wont even jump
We have a 2009 F350 that the engine is now locked up. Anyhow my question is can a 2001 Triton V10 interchange with what was a 2009 Triton V10 both 6.8L...
View 2 RepliesI have seen plenty of the king ranch models that have the rear Captains chairs. My question is, I have a 03 Lariat Crew Cab w/ a bench seat, however, I would like to remove the bench and put 2 captains chairs in the back. Is this possible without lots of interior body modifications?
View 14 RepliesPutting in a locking axle to replace there non locking axle? Have a 2015 f350. And found a electric locking for a great price. Can this swap be done?
View 14 RepliesI'm trying to remove the center console from my 2016 f350 lariat cc. I have both drivers and passengers seats out and all the obvious bolts removed. I'm still not able to remove the console. I know I'm likely missing just a few bolts as its really loose.
View 8 RepliesI'm thinking of doing a dash swap on my 99 super duty to the 2008 super duty dash, steering wheel, etc. I know the od in my truck is mechanical and in the new one its electronical is it possible to swap without having to redue the whole electrical system and computer? Is the steering wheel going to line up and the ducting? How should i approach the wiring?
View 14 RepliesI've got a 2008 Ford F250 Superduty Crew Cab. My problem is that the center console of the front bench seat is loose. I keep it folded down nearly all the time and any pressure on the front left corner causes the rear right corner to pivot up.
View 3 RepliesJust got a 2008 F-250, truck has the center console jump seat and the console lid is missing. Can you just buy a new lid or do you have to buy the whole thing? Cost? Places to buy?
View 4 RepliesI was wondering how do you remove the cup holder part of the console dose it just pop off or are there metal clips or screws hidden some how?
View 4 RepliesSo I had an issue with the trans temp sender leaking out of the test port where it's installed. My first clue was a smell of ATF, then a high trans temp, and finally many, many spots on the driveway. Anyway, I discovered that either I lost the o-ring for the sender or it didn't come with one. Regardless, I got an o-ring and its sealed for the most part. There is still a drop or two under the truck after it has been running. How can I fully get rid of this issue? Would some RTV thread sealer do the trick?
View 3 RepliesI need an expert. 2007 Ford F-350 King Ranch and tonight, the wife and I were coming home from friends house and I tried to buckle my seat belt. The receiver would not click and hold the seat belt. Cannot find the replacement. What should I do?
View 13 Replies