Ford Super Duty (1999-2016) :: 2008 F250 - Screeching Noise On Initial Takeoff From Park
Mar 29, 2016
Trying to find a bit of information for my dad. He has a 2008 F250 with the 6.4L PS. It recently started making this horrible screech on his initial take off from park. After he let's off the gas and brakes, the truck won't make this noise again for the rest of the time it's on. He ended up replacing the turbo, and that did not resolve the issue. I believe the Y pipe was checked and it was fine. What it could be that would cause it only on the first acceleration?
View 5 Replies
Advertisement
Purchased my first used Super Duty 2011 F250 6.2. Love the truck. This is my 3rd ford truck. I get home from work, so the truck is warm. Sit for 20 min, then leave to take the kids to their games. After turning onto the street then accelerating power is lost for 1-2 seconds, then the truck continues to accelerate. If I let off the pedal, then the truck will slow down, if I hold the pedal position of push down it does nothing. This is going to drive me crazy. Not sure if this is a TCM reprogram issue? It only does this on the initial take off. I want to start playing with my new truck, but want to fix this bug first.
View 5 Replies
I have an 04 F250 6.0L and for the last month or so when I turn on my AC it makes a high screetching noise but only last for a little bit. Had a friend that works on cars on the side take a look at it one day and he said it was the AC cutch trying to engage. Does this sound like what it could be? Also if it is can it be changed out without having to remove the compressor? What all is involved in changing it out?
View 5 Replies
My Ford 250 is currently stuck in park, it starts but I can't move the shifter. It sounds like it is a fuse issue from what I have read, but I bought the truck at an auction and I don't have a book. Do the brake or parking brake fuse? And where is it located? I know there is a panel under the hood and under the dash, which fuse to look for. It's a 2008 extended cab gas model.
View 13 Replies
The problem I am having is that there is a grinding noise when in park. If i shift into gear then it is fine but shifting back to park very big grinding noise. At the same time I have the Speedometer and fan for the heat not working as well as the heater for the seats.
This problem is so bad I am afraid to drive and get stuck somewhere. I have checked the starter and it is tight ad secure. all fluids are fine. Not sure what this would be? This is the single vehicle i have for work and family.
View 1 Replies
I have a v10 ticking on drivers side when I first take off in it. It doesn't do it idling and stops after you drive about a mile. I just had ford tune it up before this started so I took it back to have them check the plugs and they said it was a rod! Didn't sound right too me but I did check manifold bolts and they all was in place. Also if it was a rod would the noise go away???
View 6 Replies
Having trouble with a shutter upon take off in there drive train. It only happens when I am going straight. It does not do it when I am turning or anything. I just bought the truck used sat. It has around 18000 miles on it. I haven't had a chance to put a load on it yet to see if it does it then.
View 14 Replies
I have a 2000 f250 superduty gas v10 6.8L . I bought this truck about 4 months ago. Now when I take off from a complete stop the truck shakes up until second gear, shifts fine all the way up until the last gear it looses power "loosing power" i mean i can put my foot into the pedal and it takes forever to climb speed meanwhile the RPM'S never skyrocket like it the transmission was slipping if anything a couple times the RPM's dropped are stayed the same then as i take my foot off of the pedal once i have my desired speed sometimes not always the truck will give me a little jerk Also Just the other day I was driving on the highway and decide to put her on cruise control at about 70mph, I set the cruise control and the RPM gauge was just over 2,000 and the tach was fluctuating up and down about 1/16 of an inch. I been reading alot of forums and what I got out of them is it maybe pointing me to a misfire maybe the coil packs? Plugs?It's not something major like a transmission rebuilt.
View 6 Replies
I guess my AC Compressor is about to the bed. AC works good however there is a lot of rattling going on. Been driving it like that for two months plus expecting it to fail.
Just not sure how long I should let it go. If the compressor pully fails on the road I will lose my serpentine belt and the ability to put the spare on and I will be stuck for sure.
2008 F250 XL 5.4L .....
View 1 Replies
Noticed this morning that the truck appears to have a screeching/grinding noise while going straight down the road. If I go a bit of speed and stop the engine and exhaust from revving and making noise and just let it roll I can hear it and hear it better by sticking my head out my window. My engine and 5" straight pipe hide it well while im going though. I think its coming from my front driver side but im not 100% exactly sure. What it could be? I know there are a lot of variables to cover but any ways to check things out? Also! I can hear it slightly while reversing slowly.
View 8 Replies
I recently pulled the stock tp38 off. The reason for rebuilding is the turbo started making an awful screeching on start up and shutdown when the compressor is at a low rpm and starts to wobble.
The shaft has 1/2 in and out play with 1/8 in every direction. the compressor has some wear marks but no chips, the turbine has some good chunks missing. from what i can see there are no marks on the housings.
What should i put in it as far as new compressor and turbine/shaft. nothing that requires machining. I am not looking to run more boost or anything, just looking to reduce spool up time if possible. Any specific rebuild kit? what turbine and compressor should I go with?
View 3 Replies
I have an issue with a truck I just bought. Sometimes, it doesn't go to Park when I shut it down. In order to start it I have to sometimes put it in neutral. Once in a while it will start when in the Park gear. What I should look into to fix it? It doesn't seem like a big deal.
View 6 Replies
My father has a 2009 Ford F-250 Superduty with the 5.4l V8. Two days ago, he frantically woke me up from a nap because he could not get the truck out of park nor are the brake lights turning on when the pedal is pressed. I instantly thought Shift Interlock, did a quick google search and found that it can be the shift interlock or brake light switch on the brake pedal. I have since then replaced both to no avail as well as checking all fuses. I put a multimeter to the brake light switch connector and am getting a steady 10.2v. I am aware there is a bypass switch but that doesn't address the fact that he has no brake lights.
View 9 Replies
2011 250 run fine when parked it Friday jumped in it Monday morning got a check traction control light on will not shift out of park no break lights replaced break switch all fuses are good.
View 5 Replies
I have a 2006 F250 V10 that has this issue most of the time but not all the time. Start her up, foot on brake and the shifter wont move. I use the bypass method to get her moving when this happens. It seems to be doing it more often lately. Also I recently has a cruise control issue. Hit the brake to shut it off and it doesn't stop it! Not sure if the 2 are related. The internet said I need to replace the switch on the master cylinder to fix the cruise control. I got lots of different stories on the park issue.
View 2 Replies
My 2013 F-250 Super-Duty periodically won't start or come out of park. I have tried the ignition trick of tuning it to first position but with no luck. Sometimes I can see the light for the indicating light for being in park flashing on and off rapidly and manage to get it into neutral to start. It appears to be completely random. I potentially happens when I drive it for longer periods or do frequent stops around town.
View 3 Replies
Iv been chasing an electrical issue with my park lights staying on. Even with the #8 fuse out and the GEM unplugged the lights stay on.
They are being powered by the #4 fuse circuit that power mirrors, glove box light and under hood light are on. With that fuse pulled the park lights go off.
Now I have to figure out how the 2 circuits are connected.
View 13 Replies
I bought this truck with 60,000 miles and have had about 3 months. I don't drive it very much but when I do I have noticed that when it sets for 4-5 days or longer the transmission makes a weird noise as you take off and does does shift into gear as it does when I use it ever day. The problem goes away very quickly (not even a 1/4 mile driving) and everything is fine after that. By the way I took it to the ford dealer who did a complete 60,000 mile service on it that was suppose to include changing the transmission fluid and filters-could they have screwed something up (I did not notice this issue until after the 60,000 mile service?).
View 7 Replies
I have a 2001 F250 V10,
So the truck drove fine yesterday had zero issues... I used my auto start as I do every morning in this cold weather, get into the truck and shift from park to drive and its like it does nothing. I can free rev in N,D,1,2. Reverse works great.
I tried switching from 4wd to 2wd, no change. Reverse works just fine. No noises, codes or anything, just doesn't want to engage...
I am assuming I have a 4R100. Could something electrical cause this? I am thinking its mechanical, but hoping someone has ran into this before.
Literally no way I would have known the trans was going bad... It's always worked fine. Tranny fluid is full, I tried unplugging the battery waiting and plugging back in, no dice.
View 11 Replies
I was driving my 1999 F250 5.4 Triton last week, after noticing a thump while backing my small boat down the ramp (sounded like u joint) I went and parked. When I got back in the truck it starts fine but when I shift into reverse, it's staying in drive, anywhere I put my shift lever..... It's in drive! I even noticed that even all the way up into park it feels like it's in drive, but with something holding it back. If I give it gas while in park it will go forward! I have tightened the two torx screws under dash, pulled cable off and tried shifting by hand (clicks like switching gears, but still in drive) pulled pan, everything looked good there, fluid is nice and red, smells good, no metal in pan? It's the 4r100od tranny.
View 7 Replies
My 2001 f250 on occasion will roll a very uncomfortable distance when I put it in park. Not all the time, but enough to concern me. It will roll a good 12-18" before the park rod or what have you engages. Doesn't seem to be affected by grade. Matter if fact it has always done it on just slight grades. Nothing like a boat ramp. It rolls enough that if someone had been front or back it would have bumped them.
View 1 Replies
