2008 F-350 ... Getting a click in the steering wheel. Slow speeds in parking lots. Even with the truck off you can manually move the wheel and notice it has play. Maybe 1/16" - 1/8" of play
Read a few old posts saying there was an TSB on it TSB 05-15-1 ... Couple of the posts say they replaced the steering column. Wanted some input before I pull this apart. It's more annoying than anything ..
I have a tow haul problem with my 2008 F350 6.4L. It will not go into tow haul unless I tilt steering wheel up all the way and than slam it down and than it will engage. Than when I want to take it out, I have to shut off truck. Any wiring diagram and info on how to get at the wiring. Do I have to disarm Air Bag and pull Steering wheel?
View 13 RepliesI have a 2006 F350 6.0L Diesel with about 72,000 miles on it. It has been the best truck ever, but just about two weeks ago it started doing something real strange. While driving, and it seems to only be at slow speeds, (idle or just accelerating), the truck will shut off the engine. And it is always in this order, it will first "pop" all the speakers real loud, then the radio will reset, (go to the AM radio and shuffle through my 6 disc changer) and then the engine will shut off.
Once I bring the truck to a stop and put it into park, it will then start back up with no problems at all. There is nothing I can seem to piece together as to when it will do it other then it seems to only be at slow speeds... Besides that, it is completely random. One day it did it four times, and then it didn't do it for the next few days at all... The only thing that has changed over last 2 weeks is that, the last few times that it has done it, it didn't kill the engine, it still popped the speakers like normal and then reset the radio, but didn't shut off the engine.
1999 F-350 7.3 Dually 2wd Front End issues. I think I may have several things going on so here goes. Truck has about 130,000 miles on it . Bought it with 60,000 miles in 2009.
It's always worn the front tires weird but it's gotten a lot worse and it's happening in about 10-15 thousand miles now. It's wearing the tires on both sidewalls like under-inflation but I run 70 lbs in them. I've noticed for several years now that it makes a knocking sound and I feel it in the floorboard, shakes in the steering wheel when I turn to the left only in a corner at speed. (65-70) ...
Now it's started intermittently going into the death wobble at slow speeds like the caster is to negative on it. I'm sure it could use some shocks but I just rotated the tires and I felt no play anywhere. I know when we used to get that bumping in the floor board on older Fords it was a bad radius arm bushing but that couldn't be all of what's going on here. I've done searches on this and it has happened to others but I haven't found a resolution from any yet.
Every once in a while, while driving my 06 350 SRW at slow speeds, I hear a grinding noise coming from the left side of the truck. It is almost like a winding grinding noise if that makes sense. It will grind slow to a stop, and then I hear a clunk.
This is a very intermittent problem. The tires are completely shot on the truck, and I thought that would be it, but considering it is intermittent and the clunk I hear as I come to a stop I figured it could be it.
My truck starts sounding off like a foghorn at slow speeds and idle, goes away as soon as you tap the gas pedal. The truck is all stock. 2004 5.4L ....
View 1 RepliesLast few months my 08 F250 has been slow going up hills. The fluid checks out ok and it shifts fine.
It just seems to take forever to get up hills. Has 124K....
Also has a huge hissing noise thats RPM dependent on the passenger side. Will make the sound in neutral just revving.
I have an 08 f350 lariat with the 6.8 with 66000 miles. A month ago took it to the dealer with a plugged catilityc converter. All covered under warranty. Got the truck back, starts great when cold including 18 degrees the other morning. I drive 7 miles to work, shut it off and restart, it acts as if the starter is struggling to turn the engine over. Once it cools off, starts fine again. I took it back to dealer, they replaced the starter. No change. Took it back again, they replace battery. Cranks a little faster, but you can tell it's still struggling. It always starts, I'm just wondering how it will be when it's 80 out and in pulling my 9000lb camper....
View 14 RepliesOnly 2 speeds of the 4 speeds are working on my blower. I was thinking it may be the switch, but someone at the shop told me to replace the blower resistor first. I did that and still only have 2 speeds. Im guessing I need to replace the switch now?
Also, I am having problems with my heat adjustment. I have it set to warm (half way between cold and hot) and out of the blue it will start blowing hot. I turn it down all the way to cold until it blows cold air and turn it back to warm, and it will be fine for a few minutes and start blowing hot again. Vacuum problem? blend door problem? How would I go about trouble shooting this problem?
I've got a 2008 5.4L I just bought. The previous owner just ran around the city and never pulled anything with it. After the truck has been pulling and the engine is hot, when I slow down to an idle the engine starts to diesel. This lasts for a few seconds then goes back to normal. Is this just because the engine isn't used to working and the computer hasn't adjusted yet? is this something that could be serious and I should have checked out by a garage?
View 4 Repliesthe mechanism that locks the steering wheel is stuck. not the ignition key cylinder (already removed that). how do I release that mechanism to free the steering wheel.
View 3 RepliesSeems that after a sharp right turn, for instance turning right at a stop sign I'll get a loud pop that I can feel in the floor pan under my feet.
After the pop the steering wheel and whole front of the truck will shift left and right like someone is grabbing the wheel, sometimes violently. If I drive slowly it will cure itself and sometimes not do it again for several days. I've check ball joints and hubs and they are in great shape. I pulled the hubs and greased the needle bearings about 6 months ago. I checked all steering components and the linkage that attached to the steering arm had some play so I replaced it. Then I found that some idiot took the steel sleeve out of the bushing in one end of the steering stabilizer. I bought a new stabilizer and cured a pop I'd had since I got the truck, but the other issues were not solved.
Alignment has been checked too.
My truck has developed a wobble in the steering wheel. I don't mean when you are driving down the road, but the steering wheel wobbles around. It wobbles in any position that the Till shaft is set to. How to repair.
View 10 Repliesjust bought this f250 seems to walk on the road alot, had it looked at has new balljoints, he says everything seems tight except there is lots of play at the gearbox, is it recommended to have it rebuilt or buy a reman, was told that even the reman seems to be the same way
View 14 RepliesThe steering wheel is locked on my 99 F-350. I messed around with the stupid thing for quite a while this evening and it won't budge! I need it to haul hay tomorrow....
View 13 Replies06 F250 6.0 CCSB 4x4 163K Truck was in a pass side wreck about three weeks ago. Aside from bumper, head light, etc I had to replace the track bar and then I had the alignment done. Mech said the steering was loose and was either the steering box or column.
PROBLEM: Truck drove and parked fine last night, I went to leave the driveway this morning and I had to turn the wheel full right while backing up. The wheel locked up and wouldn't turn back to the left to straighten out. Hood wouldn't pop either to check anything
I crawled under the truck, the belt was in place and I didn't see any power steering fluid leaking. Thinking it was a PS problem and the hood not opening, I basically floored it and yanked on the wheel and it broke loose. Also, for what ever reason the hood opened after that
Now the steering is heavy and the wheel doesn't center on it's own. It will stay turned when I let go of the wheel. Scared that it would happen I didn't try turning it full lock on the way to work. but it happened again exiting the parking lot, again full right lock and the wheel stuck.
I managed to yank the wheel to the left again and I heard a distinct pop from what I'm sure was the pass side wheel area.
The PS fluid is dark and I'll figure out how to change it. I've read issues from the U-joints, ball joints, Steering box, steering stabilizer, and failing PS pump could all lead to this. Being the truck had a pass side fender bender, and I'm pretty sure the pop sound came from the pass side how do I check all of these items.
So I just got my 2014, upgraded from a 2007, and one change that is bugging me is the steering wheel controls for the radio. In the old truck clicking the scan up/down buttons scanned to the next radio station, in the new truck it scans through the preset radio stations. I really don't like that. Can it be changed or am I stuck with it?
View 2 RepliesI have a 2005 F250 6.0.. I'm the third owner, only 146,000 miles on it. Had most of the front end replaced. Ball joints, tie rod ends, track bar bushing, front end alignment done...
Still likes to walk as I call it side to side while driving down the road. Factory size tires, factory rims. A little excessive movement in steering wheel while driving, side to side and not transferring to pitmen arm. So I think the gear box shot. Got to looking closer and the power steering box has a re-manufactured sticker on it, so thought about rebuilding it. I do not know where previous owner got gear box at.
Ordered a 2015 f350 CCLB FX4 XLT 6.2 about 2 weeks ago.Tried to see if the control buttons on the steering wheel were lighted couldnt tell in the daylight.
View 5 RepliesThis is probably a strange request but I did just get a 2011 F250 XL. The SYNC and audio controls on the steering wheel was an available option, but my truck does not have it. I didn't ask for it to be required in the vehicle search, just one of those "if it has it, awesome" things. I am looking to add the buttons to control the radio and MAYBE SYNC for the bluetooth feature if this is possible.
I know to add SYNC I need a radio that's ready for it, which mine is, and a microphone somewhere and all of that so that's not to be done until a later date. My old F150 had the radio controls on the wheel and I miss that. Can I add the radio controls on the wheel? And maybe SYNC without needing to add a Parrot device for bluetooth? Or am I SOL on both?
Yesterday while traveling about 30mph and starting into a slight left turn the steering wheel locked, when the brake pedal was applied it was rock hard and would not engage braking resulting in a single vehicle crash, no injuries. 8300 miles...
How would I make Ford aware of this incident and get them involved? Is it likely that such events may have been logged somehow in the computer? The truck is at our collision repair shop waiting for an insurance adjuster to inspect.