Ford Super Duty (1999-2016) :: 2008 - Center Console Swap For Middle Seat
May 31, 2011
I am considering the purchase of an 08 Super Duty, however the truck I am looking at has a center console between the front seat. I need seating for six and like to swap a leather middle seat with fold down armrest for the console that I can't use. I don't want to buy this particular truck if I can't somehow get the seating issue corrected. You can view the truck at this link. 2008 Ford F-250 ...
View 9 Replies
Advertisement
I have a jump seat in my 08 f350 and am looking for a center console. My interior is black and tan and the jump seat is all black.
View 3 Replies
Looking to swap out my center console for a center jump seat in my 2014 F350 xlt. Mines has gray cloth interior. Can this be done? Need to swap their seat for a console?
View 5 Replies
Got an 03 f250 supercab, and looking to get rid of the old front bench seat for 2 regular front seats and installing a big middle console, will this be kinda hard? I got in my truck now the driver seat is seperate from the 2 seater bench seat and it has the flip down middle console to where you can flip it up for somebody to sit in the middle or flip it down for the cup holders etc.. I want to get rid of that and just have the 2 front seats and an big middle console. I think some of the 1998-2003 f150 come with this set up
View 3 Replies
I have the 60/40 seat with fold down "jump seat" that has the 2 cup holders and console. In the down position, it squeaks something fierce on any kind of a bumpy/rough surface. On paved roads it's fine.
View 11 Replies
I've got a 2008 Ford F250 Superduty Crew Cab. My problem is that the center console of the front bench seat is loose. I keep it folded down nearly all the time and any pressure on the front left corner causes the rear right corner to pivot up.
View 3 Replies
Have a 2008 F350 Lariat Crew cab and I don't have any power coming to the center console power points. I unplugged the cig lighters and check the harness itself but no juice. Fuse 41 and 43 test good am i missing another fuse not listed?
View 5 Replies
Just got a 2008 F-250, truck has the center console jump seat and the console lid is missing. Can you just buy a new lid or do you have to buy the whole thing? Cost? Places to buy?
View 4 Replies
I am wanting to take off the center console lid to recover it. The only way I see to remove just the lid from the truck is to hit the rod out that is in the hinge. I was hitting pretty hard with a punch and it wasn't moving. I don't really want to break it so I'm asking if there is a different way or if I just need to use more force?!
View 4 Replies
Just purchased my first ever Ford truck a few weeks ago, it's a 2012, and where the drivers right arm rested on the center console, near the cupholder, it's perpetually sticky. At first i thought it was just filthy, but after thoroughly cleaning it, it just stays sticky.
View 12 Replies
I'm trying to remove the center console from my 2016 f350 lariat cc. I have both drivers and passengers seats out and all the obvious bolts removed. I'm still not able to remove the console. I know I'm likely missing just a few bolts as its really loose.
View 8 Replies
After a 7 year love affair with our 2005 6.0L Excursion, we bought another 6.0L today - a 2006 F250 Crew Cab. It came with front buckets/console, and the used car lot (all diesel trucks...) was nice enough to let us swap the seats out with another 2006 F250 Crew Cab on the lot that had the front captains' chairs with the center seat.
Their upholstery guy did the work with the captains' chairs, but for liability reasons they wouldn't bolt the jumpseat in, since the truck we bought didn't have the studs in place. So, they sent it home with us and we're faced with putting it in. No problem, right?
Well... we found the place for the bolts to go, and thought we were home free. BUT... (see photo) - what have we done wrong?? The first photo (driver's side bolt of center seat) is fine, but the passenger side bolt hole is too close to where the front passenger seat needs to bolt in.
View 1 Replies
When opening the center console at night, it is obviously pitch dark in there. I know that I could turn on the dome light, but 1. i'm lazy and 2. that still does not offer a whole lot of light.
I want something that will come on when I open the lid, and then go off when I close it. I do not really want anything on a switch. So i'm thinking about setting something up like the glove box with the thing that pushes in and the light goes out, you all know what i'm talking about. I would not think it would be too hard to wire up.
View 13 Replies
I have seen plenty of the king ranch models that have the rear Captains chairs. My question is, I have a 03 Lariat Crew Cab w/ a bench seat, however, I would like to remove the bench and put 2 captains chairs in the back. Is this possible without lots of interior body modifications?
View 14 Replies
I'm thinking of doing a dash swap on my 99 super duty to the 2008 super duty dash, steering wheel, etc. I know the od in my truck is mechanical and in the new one its electronical is it possible to swap without having to redue the whole electrical system and computer? Is the steering wheel going to line up and the ducting? How should i approach the wiring?
View 14 Replies
I was wondering if this is possible, I have a 2008 F-250 6.4L and a 2003 F-350 both crewcab longbox, the 08' F250 has a ruined engine & great cab/box, my 03' F-350 is fine except it has substantial body damage - Is it possible with some welding & magic to get a 2008 cab onto a 2003 6.0L F-350?
View 4 Replies
I was wondering how do you remove the cup holder part of the console dose it just pop off or are there metal clips or screws hidden some how?
View 4 Replies
I need to replace a bulb (I hope) in my center clearance light and need to remove the amber lens cover. Lots of info about installing for those without but I haven't been able to find anything about removing the lens cover so that I can replace a bulb. I'm working with a 2008 F-450.
View 6 Replies
Just bought this '08 F250 CCSB 4X4 5.4 Problem is the steering seems heavy, it tends to wander at higher speeds and won't return to center after a turn. I've searched on here and found a few possibilities (axle u joints, ball joints, steering gear, etc). I have an appointment with the dealer on Friday to fix it under warranty but he is convinced it's the u joints in the steering shaft seizing. When my F150 steering shaft began to seize, it would be hard to turn then break free then be hard then break free and this is not what is happening on the SD. I haven't had a chance to check the front end myself but not sure how you would check the axle u joints if there was no play in them. How would you check to see if they were seizing up.
View 3 Replies
Truck is 08 f350 lariat with minor issues. Both seat heaters don't get hot. Click is heard under driver seat. Both dash lights come on. No heat. Steering wheel fan control won't turn fan up. Turns it down fine.
PO put aftermarket HID with ballasts and bulbs and factory light housings. Factory housings scatter light and they are waaayyy bright. Can't drive anywhere with out blinding someone. What aftermarket projectors will work with HID set up I already have?
View 4 Replies
In my new to me 99 F250 SD ,Started today off with switch sticking in drivers door causing dome light to be on when doors closed... oiled the crap out of the door mechanism and it started working. Later in the night I look out side notice the radio lights on with no key. Can't figure it out so pulled the face off and figure I'll look at it tomorrow and go to bed.
1:30 am the horns blaring! I open drivers door and horn stops, close it and it goes off I ended up pulling the batt cable so I could go back in the house. I did search for info with no sure real causes. Seems like it has happened to others as well.. BTW it did start raining before the radio stayed on. Thinking water in the dash or fuse panel. But it doesn't explain door switch problems I had earlier. Maybe 2 separate problems. This will be fun! Not!
View 10 Replies
