Ford Super Duty (1999-2016) :: 2006 - Steering Gear Going Out?
May 31, 2014
I think my steering gear is going out having problems and not sure what's going on got fluid no leaks??? 2006 f250 6.0 l diesel
View 2 Replies
May 31, 2014
Advertisement
Ford Super Duty (1999-2016) :: Steering Gear Box Leaking
I'm might be needing a gear box rebuilt or maybe buy one already rebuilt.
View 5 RepliesFord Super Duty (1999-2016) :: Replacing Steering Gear Box?
My father's truck is still having power steering issues. After replacing the power steering pump I went from no power steering to power steering when I turn right but not when I turn left. So now I'm going to replace the Steering Gear Box. Where I can get step by step instructions on the best way to get to the gear box and how to get it out?
View 1 RepliesFord Super Duty (1999-2016) :: 2006 - Stiff Steering After Installation Of Red Head Steering Box?
I have an 06 F-250 5.4 gas w/138k. It had recently had a lot of play on the wheel (15 degrees maybe) and last week I made the move to replace the gearbox with a redhead box. All seemed to go ok, but now the steering is stiff and it won't come all the way back to center after a turn. It turns smoothly and completely with no binding, but it has to be moved the last 1/3 turn back to center.
I flushed the fluid initially with Valvoline max life fully syn. Then second guessed myself after the problem started happening so I switched it back to regular Mercon. No improvement.
I had it on stands today and it was extremely difficult for me to turn my tires left to right manually (at the wheel). The only other thing I did was adjust the sleeve on the drag link to straighten out the steering wheel.
Should I be able to turn the tires left and right from the wheel easily? Every now and then I hear a whine from the pump which I never had before, but 99% of the time it seems fine and is quiet. it just feels like something is over tight but everything should be to spec.
Ford Super Duty (1999-2016) :: 2006 - Power Steering Grinding Noise?
i have a 2006 F250 XLT 5.4L 4x4 Crew Cab. after months of dealing with an ongoing power steering issue and replacing pumps left and right, i decided to replace the entire power steering system. Ordered Gearbox, Pump and Cooler from dealership. The install went fairly easy, and finished in 2 days.
The truck used to whine and grind as i would turn wheel any direction, driving or in park and the wheel used to pull , like jerk a bit when i would go like in a u-turn.
Not anymore, all those issues are gone. Steers straight , no whining , wheel doesn't pull anymore and all seems fine, EXCEPT when i take a turn , for example onto a driveway where its a bit of an incline. Then, i hear some grinding noise and a bit of vibration in my wheel. I think it comes from gearbox or pump.
Im scared not to drive it too much as all is new components and don't want to ruin all over again.
Ford Super Duty (1999-2016) :: 2006 F250 - Bleeding Air From Power Steering
What is the best way to bleed air from the power steering lines? I just replaced the power steering pump on a 06 6.0 f250 and now I need to bleed the lines and refill the power steering. I'm just curious as to what is the best and easiest way to do this.
View 14 RepliesFord Super Duty (1999-2016) :: 2007 F250 - Steering Gear / Suddenly Developed About A Quarter To A Half Turn Of Slop
My 07 has developed a steering gear issue.....it suddenly developed about a quarter to a half turn of slop......mechanic checked the front end and found everything to be tight and right so......I ordered a Redhead rebuilt box and will replace it upon it's arrival. My question is How often do these boxes go bad and if and when they do is it at all safe to drive the vehicle with that much play? I have to drive it about 15 miles to get to my mechanic ( far too cold for me to do it at home) and I also plow a couple of yards commercially and will need to use it there in the event of a snow storm.
View 8 RepliesFord Super Duty (1999-2016) :: 2006 F250 - Phaser Knock At Idle In Gear
Ok I bought this truck with a bad engine 5.4 3v had rod knocking. I rebuilt engine got it all back together and in truck. I did replace cam phasers and solenoids. After driving 20 mins or so it would start the phaser knock at idle in gear so I put a oil pressure gauge on it and cold had 55 psi after running 10 mins or so had 15 psi at idle then would drop to abought 9 psi. I am thinking I got bad cam bearings or something for some reason don't know why. I did it but I took oil cap off where you pour in the oil. Had to force it off it was pulling that much vaccum ones cap was off oil pressure jumped up to 25 psi. What could be causing this.
View 2 RepliesFord Super Duty (1999-2016) :: 2006 F250 - Entire Steering Pump Is Wet And Dripping
I bought a 2006 F250 Super Duty about 3 months ago, and it's been doing fine. I backed it into the shed yesterday after work, and noticed a little while later, a small puddle of fluid under the front. I crawled under and looked up...the entire steering pump is wet and dripping. I thought at first it was engine oil coming down from above, but it seems to be steering fluid (or whatever is in the steering reservoir). Clear looking fluid/oil.
I've read about high-pressure hose leaks...exactly where is that hose? Is it the one that is nearly against the pulley on the bottom? Where the fluid could be coming from?
Ford Super Duty (1999-2016) :: 2006 F350 Misfiring And Surging While Cruising At 1500 -1700 RPMs In Any Gear
I have a 06 f350 with 5.4 140k miles. Recently it has been shaking bad on idle but only in gear and it's hard to start when cold. The exhaust is moist at all times and the fluids never leak. When you floor it it hesitates feels like it's overly rich but if you let off a little it stars to pull again. Also while cruising at 1500-1700 rpms in any gear it will surge and skip. Only time it will miss and the CEL comes on is over 4000 rpms for a random misfire. Just put new coils in new fuel pump and filter. There has always been a cat code but it never effected the drivability. Could it be injectors?
View 3 RepliesFord Super Duty (1999-2016) :: 2006 F350 - Rotor Causing The Steering Wheel To Shake If Touch The Brakes
I've noticed when I'm towing, on long down hill grades if I touch the brakes I get what feels like a rotor causing the steering wheel to shake. At first it was only mild, but today on a long 6% grade it got really bad. Never does it on a level road, I've tried to duplicate it, only on a long down hill grade, and I'm not getting a pulse in the brake pedal at all, only the shake in the steering wheel. It's probably time to replace the pads anyhow, and I'll check the rotors. What things to look at?? 2006 F350, 6.0 dually 4x4.....
View 2 RepliesFord Super Duty (1999-2016) :: 2006 F250 - Retaining Steering Wheel Controls With Dual Head Unit
Bought a new touchscreen head unit to put in my 06 lariat f250. I have all the controls on my steering wheel for heat and radio and I don't want to lose them with a new radio. This head unit does not have the 3.5mm jack for the axxes unit but has 3 wires labeled swc1 swc2 and swc ground. It supposedly has the converter built in. any views on using a headunit with these wires?
View 3 RepliesFord Super Duty (1999-2016) :: Difference Between F250 Custom And Heavy Duty Steering Stabilizer?
Is there a steering stabilizer for a 92 Ford F-250 custom 2wd? and what's the difference between a f250 custom and a f250 heavy duty?
View 2 RepliesFord Super Duty (1999-2016) :: Won't Shift Into 1st Gear?
So it appears as though my shift lever (automatic) will not shift into the 1st gear position? However when I drive the vehicle, the transmission seems to shift through 4 gears, then into Overdrive? What could be the issue?
View 3 RepliesFord Super Duty (1999-2016) :: Trans Only Goes To 3rd Gear In 4x4 Lo
My tranny only goes to 3rd gear in 4x4 lo is that normal? 2014 6.2 xl f250 ....
View 14 RepliesFord Super Duty (1999-2016) :: F250 5.4L - No First Gear?
Friend's truck started shifting wierd the other day, starts in second gear (maybe higher). The transmission is a fresh rebuild, the shop wouldn't warranty the rebuild and blamed electrical problems outside the tranny. Fuses are all good, engine light is on but the cheapo code reader won't show a code. Did a search and no answers. Had the overdrive light flashing from before, that code was for a wheel speed sensor.
1999 F250 (7 bolt) 5.4L 4x4
Ford Super Duty (1999-2016) :: What Gear To Put In When Going Up And Down Mountains
I just purchased a 2016 motorhome on a f53 chasis with v10 engine. The transmission has D, 4, 2, and 1. THERE is also a tow/ haul button. What gear do I put the transmission when going uphill and downhill. I am traveling in Shenandoah Valley and when I was rolling downhill the rpm began to race between 3-4k rpm without my foot on the gas pedal. Is this normal, I was in regular D mode. Going uphill I controlled my acceleration and I was at 2500 rpm. I just don't want to use incorrectly and affect my transmission and engine.
View 2 RepliesFord Super Duty (1999-2016) :: Truck Will Bog Down And Sometimes Die When Put It In Gear
I have a 2001 f250 7.3L. I bought it with 192,000 miles and have driven it to 206,000 in the last 6 months. When I put it in gear, the truck will "bog" down and sometimes die. I will have to refill the transmission fluid every 2 weeks but I can't find where it's leaking.
View 4 RepliesFord Super Duty (1999-2016) :: Steering Box Adjustment?
on my diesel, the steering box has a larger lock nut on top of another smaller (5/8") nut at the lash screw. I was wondering if the lower 5/8" nut might turn with the upper lock nut if I don't also hold it in place? because if the lower nut is fixed to the cover then I don't have to worry about it. I'd just loosen the upper 17mm lock nut so I can make a minor lash adjustment.
It's just that I didn't expect to see both an upper and a lower nut securing the lash screw. I'm beginning to noticed some minor sector shaft play. being that it's a diesel the fan shroud is basically in the way, if I need to use two tools at once, there's not much room in there for two ratchets with extensions. The reason for my concern is that at center I start to see minor drift/bump steer. Haven't looked too deep in the components just yet.
Ford Super Duty (1999-2016) :: Second Gear Skipping When Driving In D
A couple days ago, my Excursion started skipping 2nd gear when driving in D. The RPMs will go up to 3500 or so before slamming into 3rd gear. Shifting in all other gears works fine. However, when manually shifting through the gears (1, 2, D), it finds 2nd gear and shifts fine. I am mechanically inclined when it comes to engines, but not an auto trans.
View 6 RepliesFord Super Duty (1999-2016) :: F250 Won't Go Into Park Gear
I have an issue with a truck I just bought. Sometimes, it doesn't go to Park when I shut it down. In order to start it I have to sometimes put it in neutral. Once in a while it will start when in the Park gear. What I should look into to fix it? It doesn't seem like a big deal.
View 6 Replies