Ford Super Duty (1999-2016) :: 2003 F250 - Harsh Shifting / Sluggish / Loss Of Power
Jul 22, 2013
I have a question for everyone out there with any insight of the harsh shifting with these trucks. I have a 2003 f250 super duty with the 5.4l and 126,000 miles on it. The problem I'm having is some weird shifting that has been going on over the last six months and I feel like I am just throwing money at this problem. My truck shifts hard from 2nd to 3rd and from 3rd to 4th with the most violent shifts being from 3rd to 4th! Between shifts is where it Is sluggish I mean if I am not on the throttle from those shift points I switch from driving a truck to a geo metro it is night and day with the felling of loss of power!
I have had it scanned at my local ford dealership and had a full diagnostics done and all I got was "it's since truck and a nice bill to come with it" they couldn't find a thing. So far I have all new motorcraft plugs, cops, changed fuel filter, had my catalytic converter checked if it was clogged,run on two different power balance tests! Still nothing! So now I'm lost I have heard things about these trannys and the lock up but I was told this only had to do with overdrive and it wouldn't happen at other gear changes. I still drive it everyday I have just figured out ways to calm it down if I stay off the gas when it's about to shift for a couple seconds then get back on the gas it is like it never happened.
View 11 Replies
Advertisement
My truck is a 2003 f250 / 2wd automatic, 7.3 powerstroke, 284000 well maintained miles.
Just last week I sprug a large oil leak and had to replace the hoop outlet o rings..problem solved. This week I can drive 15-20 miles on the freeway and the truck starts to act like ota running out of fuel. Bogs down to 40mph then starts missing. I pull over, and when revving I have un burnt fuel and oil smoking out of my tailpipe. I let it sit for 5-10 minutes and it will be fine for the rest of the drive and this happens intermittently, there is no pattern.
The truck has a ton of power, starts great hot or cold. I did a ton of research and found a IPR could possibly cause this, as could plugged screens in the fuel pickup. Then I read about all the injector harness issues but I don't think that I my issue.
View 8 Replies
New truck 11000kms ago thats done medium amount of work but nothing heavy or sustained for long periods of time. I get the feeling of clutches slipping especially when truck is cold but also when normal temps. Doesnt make any weird noises or anything. I can really notice the difference in torque if in manual mode being much better, but still not perfect if i stomp on the gas pedal and go through the gears in manual mode will still slip. Also is really harsh shift if i come to a halt in 3rd manual mode with the brake pedal depressed push minus button the truck makes very loud clunk noise into gear 2 then 1. Took it to ford they couldnt find anything ? Thinking of trying another dealer.
View 2 Replies
One of my work trucks is a 99 F-250 5.4L. Up until recently it's been running strong. Then one day it's like someone flipped a switch, and now it runs like it's losing power.
Symptoms: a quick short stumble when you first hit the accelerator. While driving, it takes the entire pedal to accelerate. Even with the pedal to the floor, it won't keep up with traffic. Driving uphill, it will barely maintain 40 mph.
I've checked everything I can think of. Fluids and filters are all good. Battery and alternator are good. There are no trouble codes. I have Autoenginuity with the Ford Bundle, and the truck passes every diagnostic test I throw at it.
There's no smoke. It still idles pretty smooth, although there is a slight and very quick random shudder in the idle that has started at the same time it started losing power.
Transmission is good. The last thing I tried was to change the fuel filter, but that made zero difference. Quick question, does the tank on the 5.4L trucks have a pickup screen like the diesels? If so, I might try blowing some compressed air through the fuel line and see if it dislodges anything.
So that's where I'm at. It has no power, yet I can't find a single thing wrong with it.
View 14 Replies
I have a 99 F-250SD with 5.4 automatic that just all of a sudden started running unevenly at random times, but frequently. There is a pending code P0300 Random/multiple cylinder misfire. I have had the truck for 12 years and it has run perfectly for the last 10+ years and just started this problem, it did not come on slowly but all of a sudden. I have seen on here that some people say that 90% of the time a PO300 is a bad cop. I replaced the plugs 60k miles ago when I had a bad coil on plug 10 years ago that did not set any codes, but this seems very different that more than one cylinder seems affected, like maybe 2 or more cylinders are not firing momentarily.
There is a big power loss momentarily while it happens, but doesn't happen for long. The fuel pressure stays pretty constant (30 psi at rail) even while it happens, and it can affect the idle as well as while accelerating or cruising at speed. I cant imagine more than one coil on plug would be skipping at the same times or fail at the exact same time, but maybe having only one bad cop could cause this much hesitation? Does the code that indicates random/multiple cylinder misfire rule out only one bad cop? It just seems like running on 7 cylinders wouldn't be so noticeable. Could a sticking egr valve cause unevenness at idle and higher rpms and set a P0300 code? Would checking manifold vacuum be they way to see if egr valve is not working correctly.
View 11 Replies
I just got 03 f250 with 6.0 and when shifting has a weird surge/lag thing happening. Reminds me a little of the old 7.3 surge when it was just started on a cold day. Seems to be worse in higher gears.
View 2 Replies
2002 f350 7.3 ... problems started all of a sudden one day. I have an edge evolution tuner in my stroke. I have it set to make all of my shifts firm. One day it started shifting really sluggish between 1st and 2nd gears only. It don't do it all the time, but it does it more often then it doesn't. I have also noticed when i come to a complete stop and then start out again it seems that it doesn't downshift all the way back to first and when i hit the gas it seems to kinda be stuck between gears and it barely moves until i get the rpms up before it will ease its way into 2nd and the converter locks up.
It shifts a through all the other gears just fine nice and firm like it should, its just the shift between 1st and 2nd. Im wondering if maybe it might be the speed sensors or maybe the tranny filter is getting clogged up? The fluid in it is still nice and red and up to the level it should be. I just bought the truck in october and the fluid was nice and red when i bought it, but who knows if they changed the filter. I have had NO tranny problems with it up until a few days ago when this little problem started.
View 8 Replies
On the highway doing 100 mph. during af take over, my Ford F-250 6,4 Super Duty 2008, lost nearly all power. (now it is like driving my old hummer h1)
Engine and car runs/starts great, only 10 minutes uptil 60 mph. now.
My mechanic has given up. He checked following:
EGR = OK
HOSES = OK
ERROR CODES = NONE
INTER COOLER = OK
PARTICLE FILTER CLEAN = OK
TEST WITHOUT EXHAUST = NO DIFFERENCE
FLUIDS = OK
Hopefully something I can fix with my hammer. The car has 85.000 miles on the clock.
View 14 Replies
My 2003 6.0 truck lost most of its power. It has the SCT programmer. It used to run great it would roll coal really well then it slowly started to run worse. Now it runs really sluggish especially when its cold. IT takes forever to warm up. On the freeway when ur going a constant speed it bucks and jerks a lot. It won't roll coal anymore and just runs like crap. A mechanic said I had 3 bad injectors. But I don't believe it.
View 2 Replies
I have a 2004 F250 Super duty that had a battery die (I left the keys in the ignition switched on overnight) and after jumping the battery off the vehicle started up but now I have no power door lock or window functions. Any reason a dead battery issue might affect the power locks and windows?
View 10 Replies
When passing or going up small inclines on freeway, my F250 seems to make the shift to the passing gear but then almost a complete loss of power. Jerks around for a few seconds and finally provides enough power to at least get back to the original speed. (It feels kind of like the lurching, etc. I used to get when those stinking GM diesel injectors would act up in the 1990's.)
It also stays in first/second as I punch it while entering the freeway and doesn't want to make the shift. I can put it in neutral and race the engine, so I don't think it is an engine problem, unless the transmission is electronically controlled. I have a lot of computer dashboard gauge resets after falling to zero and sometimes have to set and release the parking brake to get the auto door locks and windows to work. (That started after a car break in where the door electronics were apparently pinched, but that was a couple of years ago.)
Does it sound like the transmission or electronics? In the old days replacing an automatic transmission filter seemed to fix a lot of transmission issues. Not an option now, but would I expect to see any results doing a transmission flush and fluid change? It's probably been about 60000 since I had that done. (157000 now).
View 2 Replies
I have a 1999 f250 super duty with the 5.4 Triton motor with a 5 speed. I bought the truck a couple months ago, and it had a bad manifold leak (not surprised lol). but it ran fine just noisy. So i had a shop do new gaskets and bolts. Then my problems started.........
When you start up the truck she runs fine and some times drives fine. I will be driving along and its like some one hits a switch and i suddenly loose all power it spits and sputters and i have to down shift to make any kind of hill.
So I figures I had a misfire i got a light on for cylinder 5. So I decided to change all coils and plugs hoping that would clear things up...... well it didn't. It ran great for roughly 15 miles then it started to do the same thing again. I've changed air filter and fuel filter also.
When it starts sputtering i sometimes get a check engine light on and then it goes away. when the light is on the codes are:
P1151 A Heated Exhaust Oxygen (HO2S) sensor indicating lean at the end of a test is trying to correct for an over-rich condition. The test fails when the fuel control system no longer detects switching for a calibrated amount of time.
Read more at: [URL] ....
P1152 Lack of Upstream Heated Oxygen Sensor Switch Sensor Indicates Rich Bank 2
Read more: P1152 FORD Lack of Upstream Heated Oxygen Sensor Switch Sensor Indicates Rich Bank 2 | AutoCodes
Both codes come on together always. but it will go away when the sputtering clears up. I just checked fuel pressure its at 32psi at a idle.
View 1 Replies
I have a 2001 f250 super duty extended cab with the v10. Over the past week it has been running fine and it will all of a sudden lose power and dies. I've been able to start it back up once right away and a few times it started up after a few hours of messing with it.
So, after the truck dies it will crank and crank but will not start. We have checked fuel pressure and nothing. Then we applied direct current to the fuel pump and it turns on. Then we applied direct current to the fuel pump slot in the fuse box and got a fuel pressure reading of 40 psi. But when we crank we have no pressure.
When we apply direct current to the fuel pump slot in the fuse box the truck will only crank and not start.
View 11 Replies
2016 F250SD XLT CC 4X4...13K miles... Now with it being blazing hot in Florida I have been running windows up and a/c on. Beginning to notice the truck is not accelerating the same with the a/c on as it does with the a/c off. It seems like it sluggish till it gets to a certain RPMs then you feel it kick in and somewhat take off. Is this normal?
View 7 Replies
2003 F350 6.0L ... 171,000 miles ... 5,100 since oil change 15W-30 at the shop ...
I was driving on the interstate (50 miles of driving) struggling to maintain 70-75 mph at 2,200RPMs. I would accelerate and RPMs would go up to 3,000 but no speed. Before I could pull off speed slowed to 50 before dying. Sat on the side of the road 30 minutes before I could get it started. Had to give it gas. No misfires just quietly started. Couldn't go over 30 mph. Towed it to my destination 135 miles.
Volts on 7Pin FICM read fine.
Checked the fuel fulters. Air Filter. Tank for debris. Nothing.
My coolant reservoir was lose and I noticed a lot of coolant in the driverside front wheel well and down the left side of the undertruck. Reattached after checking FICM. Hope that was all it was cause I couldn't find any leaks.
I had Planned to have the oil changed before the return trip before this all happened. New to Diesel engines but I like a challenge. Where do I go next?
View 3 Replies
I have an early 03 f350 with a 7.3 liter 298,000 miles on it
Replaced fuel filter
New oil change and filter replacement, New icp sensor .
Deleted the baffle and installed a cone air filter with the air sensor installed in the neck .
I Was driving home one day and the truck just slumped into this huge power loss . Couldn't get over 2200 rpms and barely made it over 30-40 mph.
Truck in park - idles like crap and still won't go over 2200 rpms when holding the pedal to the floor . And it has what sounds like a miss at a struggling "full throttle" (22-2500) rpms - thought it could be my icp sensor - replaced it -- no change
Checked driver side wiring harness -- no damage chafing found -- did a fuel can to pump test no difference - and today after I reinstalled the fuel line right after I ran my can to pump test I let the system prime . Started the truck and it ran for about 40 seconds and died and wound not fire back up and would just miss and spit and sputter -- lots of gray smoke though- but it fired up a few hours later after I let the batteries sit on charger .
Now before all this happened - I noticed the truck had a bit of a gutlessness to it as I would be piddling around around town and it would have this hesitation in power kind of like a slight jerking feeling , now this truck was so gutless since the day I got it ,I couldn't even burn out on a gravel road without the throttle going limp and the check engine.
Light kicking in so I figured I'd give it a bit of hotshots secret and see if It would maybe flush the injectors but it really made no difference...
View 7 Replies
Bought this truck a few months back. Nothing but problems. I always thought it has felt a little underpowered and hesitant. I chalked it up to being a 5.4l in a f250. Well now im thinking it has been a symptom all along.
Lately, the truck has been stalling at stops. Randomly, but not often. The truck idles at 750rpm when I start it, but after driving and then coming to a stop while in overdrive it idles at 400rpm. This seems too low to me.
It hesitates occasionally when giving it throttle. Just today it got really bad and was almost unresponsive. I would hit the throttle and it would just idle while randomly kind of shooting up in RPS and shuddering. It finally produced some error codes, it looks like, but I am afraid to drive it all the way to the autozone.
I am thinking TPS. Is the TPS attached to the pedal or is the TPS attached to throttle body under the hood? I've read some conflicting stuff about this. The good news is that if it is the TPS then it should act like a whole new truck after I replace it.
View 11 Replies
My 2010 F250 V10 120000 mile has a sudden loss of MPG. It usually is around 12 MPG but now I'm at 8 I checked the air filter and its clean I checked the tire pressure and there all up to pressure. I'm probably going to try the fuel filter next.
View 2 Replies
I have a 03 F-250, 5,4L / AT trans, FX4 4X4 with power Windows/Locks/ Mirrors. I recently had a problem with my windows and radio wouldn't work. When I would start the truck the windows wouldn't move and the radio wouldn't work. (Noticed the clock wouldn't even light up indicating no power). I was reading on here about the battery saver relay could be the problem and found out it was, so that is fixed. However, before I found this website I went to hook up my truck to my code reader/ diagnostic computer and it gave me the error code of no power from the OBD-II port. I made sure everything was fine on the code readers side by using on a different vehicle. I recently installed a trailer brake controller but that uses a cable/plug under the center of the dash.
View 2 Replies
I have a 1997 f-250 heavy duty with the 7.3 I have been having problems with very aggressive and hard shifting. While it is acting up the overdrive light on the shifter blinks. This problem goes away and it might be good for a month or so, But it always comes back. I have had it to a professional trans tech, He replaced a part on the side of the tranny. I thought it was fixed, But now it is acting up again.
View 4 Replies
I just got my truck recently, when I purchased it the power mirrors do not work. Already checked the 5A fuse and it is good. Tried putting in a new switch from O'Reilly's and still did not work. Are these switches supposed to light up like the window and lock switch? Thinking it might be a break in the wiring or motors are seized but I've read that is not as common.
View 1 Replies
