Ford Super Duty (1999-2016) :: 2003 - Muffler Delete On Stock Exhaust Sound?
Nov 12, 2014
How will a muffler delete on stock exhaust sound? I don't want to remove the cat because I don't want it to be too loud. I want it to sound good but not too much whistle (considering my truck is a 2003 the whistle would be very loud) Should I just to a delete pipe on the stock exhaust, or do a cat-back 4 inch straight pipe? what will sound better? Also doing the cat back exhaust will cost a lot more.. but is it worth it? What I should do.
View 4 Replies
Advertisement
I have a 2003 F250 5.4L crew cab with the 156"wb. She has just developed a hole in the stock muffler so it will need to be replaced.
I want something that is an easy-fit, has better flow, and maybe better sounding.
View 1 Replies
Looking for aftermarket headers for a 2011 f250 6.2l gas job. I have the famous leak and I want to put something in that isn't going to warp. I was told shorty headers typically match up with the stock exhaust. Eventually going to put in a cat back also so true shorty headers would be sick.
View 14 Replies
Finally got around to take a video. This is a muffler delete with stock resonators. I had the shop cut right where the axel back bolts up to the midpipe thus ridding of the factory crushed pipe.
RCF with muffler delete and stock resonators - YouTube....
View 10 Replies
I've got a 2006 6.0 350 with stock exhaust and am wanting to either delete the cat or the muffler, but not both. I'm curious how each would sound? For example, would deleting the cat make it louder than deleting the muffler, or will one make the turbo whine more audible than the other? Also, is there any benefit to deleting one over the other, performance wise? Oh, I'm not really looking for loud and obnoxious, but more turbo whine wouldn't be too bad .
View 2 Replies
I like the stock rims on my 03 Super, any success story about this type of rim refurbishing? Or cleaning them up? Something like stripping all that chrome plating off them for a flat universal look? Nothing fancy.
View 1 Replies
I have a 94 f150 with the 351 and i was wondering how loud it would be with that huge stock muffler cut off and jsut the two cats still in place. I heard the cats will still quite it down a little bit cuz I don't want anything obnoxiously loud...
View 1 Replies
I have a 2014 ford F350. Was flood damaged, all fixed and running great except a couple of small problems.
Was trying to solve a mykey problem with volume being restricted to 49% and IDS said it had found new PCM and TCM software and should it update.
Me being a dork, (forgetting that the truck is not stock has EGR delete and other stuff that I'm not even sure of) said 'sure go ahead!!'
As soon as it was reflashed, it came up with errors
ENGINE IDLE SPEED
EXHAUST GAS RECIRCULATION ERROR
REDUCED POWER
did some googling and it seems (possibly) that when the truck was modified, the PCM was reflashed. When I upgraded the PCM I screwed it up as it set it back to original factory settings.
Do I need to buy an SCT tuner? Is there any way in IDS to disable EGR (I have a clone and I cannot find it). Am I best to take it to a shop that know what they are doing and have the reprogram the PCM.
View 2 Replies
Actually the previous owner of my 7.3 Dually cut the muffler out and straight piped it, it's really not that loud but too much drone for long highway hauls.
What's a good replacement muffler for a 7.3? Wouldn't mind a little bit of sound, it already has an oversized tip.
View 14 Replies
I have a 99 ford super duty with a 5.4 triton that is having a troublesome misfire. When you first fire it up it has a bit of a stutter then runs relatively smooth but the engine does still have a small shake to it and you can hear a bit of a choppy sound in the exhaust. Not completely smooth. When you drive it light footed it seems to run perfectly smooth and nice. But if you go past half throttle (sometimes you can go past that point) it starts to cough and is very slow at picking up.
When you reach between 3,250 and 4,500rpm the coughing stops. But the pick up is a little surgy, not steady. It was doing this for a while before the engine light came on. I got it scanned and it showed a miss fire on cylinder two so I have replaced the spark plug, coil, and injector but still the same issue. I opened up the catalytic converter to see if it was plugged up. Nothing there.
View 11 Replies
Just brought my 2006 f250 crew cab v8 to the garage. My muffler has a fairly large hole in it. My mechanic said the piping to the muffler is still in good shape and literally, the only part that requires replacing is the muffler itself. I told him I'd like a bit more of a "throaty" sound than the original stock muffler. He suggested the dynomax super turbo. I checked a few US websites and it's about half price there with free shipping. In fact, most mufflers are about half price in the States. There are so many to choose from, Which brand and model to go with. I'd like to keep it as close to a direct fit as I can seeing as all the pipes are still good.
View 6 Replies
Is it common for the exhaust to have a periodic high pitch tinny sound?
View 4 Replies
Here's a link to a video where you can hear what I'm describing. The noise is most noticeable around the start (first 18 seconds) and the end of the video when I'm closest to the exhaust pipe:
YouTube ....
You may need headphones to hear it, but the engine seems to be making a bit of a puffing sound during idle. It happens completely randomly and I'm not quite sure what could be causing it.
Aside from this noise, the engine seems to idle normally, and the check engine light isn't on. I had all of the injectors out a few weeks ago for cleaning. They all appear to be working fine. I also cleaned the throttle body at that same time and ensured there were no obstructions for the air intake and filter.
What might be causing this sound? 1999 Ford F250 Super Duty 5.4L
View 2 Replies
I have a 2002 F350 with the triton 5.4. For the last week it has been running like crap. I just did my plugs about a month ago. I don't know if it's a miss fire or bad fuel or I don't know what it could be. It's a popping sound coming from my exhaust and when it happens I lose power. It happens off and on. One second it will run fine and normal and the next runs bad. What it could be. Today I just changed my fuel filter and added STP octane boost and fuel injector cleaner. Haven't seen a difference yet.
View 4 Replies
About to do the exhaust manifold gaskets on my 03 f250.
View 3 Replies
2003 F350 short bed 6.8L V10---On start up a slight tap sound, almost like a cranky lifter, but it is an exhaust manifold leak. At the bolts, I am not sure. This has been this way for 5 years, no better no worse. After I run about 2 to 3 minutes it seals itself. Not a hint of noise. Due to heat, something is expanding to seal it (aluminum).
At my annual PA. State Safety Inspection the Tech says 'that has to be corrected if it worsens', but It does not fail inspection. This puzzles me.
How is the call made for correction. A flip of the coin, a guess and is it serious enough to fail inspection. Is this normal with the 6.8L or V10s. I know the cost involved for a fix is big league, but can it be justified. TRUCK RUNS GREAT !---
View 4 Replies
2003 6L 250 SD. Always smells of exhaust on the cabin. If there is snow it gets much worse.
View 2 Replies
Is there truely no cure for exhaust flutter on a 2002 f250 V10, bedsides putting on headers??? I have the the sound at shift points around 1800-2200 rpms. Sounds great before and after these points....
View 14 Replies
I have an 03 F250, 5.4, 4x4, with aprox. 130k miles. I recently had my exhaust manifolds replaced because 1 literally cracked in half. Ever since the replacement, I'm getting worse gas mileage! Im only getting aprox. 250 miles to a tank when before it was well over 325 (highway)...
View 1 Replies
Recently bought a 2015 f250 xlt.....very impressed with it. Only thing is the wheel feel and look to small. What is the largest size i can run stock? Will 35/12.5 fit on stock 17 wheels or should i just spring for aftermarket rims at the same time? Also exhaust options for the 6.2? Remember, i need load range e!
View 4 Replies
I have a 2004 F250, CCSB, 6.0L, Fx4, Lariat.
I am trying to replace the passenger side front hub. I either have a bad hub, or I am not installing it properly. I have it installed with the locking hub unlocked and trying to turn the hub, the entire passenger side axle spins. It is also very hard to turn it. I strapped axle, and the hub is almost impossible to turn, with or with out the actual hub installed.
This is the second hub that I installed with the same results. I''m not ruling out bad out of the box, but it is the second one I installed today.
View 10 Replies
