Ford Super Duty (1999-2016) :: 2001 F250 XLT - Adding Heated Mirrors With Signals
Nov 15, 2014
I just bought a 2001 F250 XLT and it came with the standard power paddle mirrors. I would love to add the towing mirrors (preferably heated with signals), but what I am wondering is if the connectors for the mirrors are the same. Also would my truck that came with the standard paddle mirrors be wired for turn signals and heated options? How would I test for this? Also do all XLT's come prewired for the hardwire keyless entry pad if they have keyless entry?
View 1 Replies
Advertisement
How hard is it to install heated towing mirrors on an 01 f-250 7.3L?
View 3 Replies
My father has a 04 f350 crew with heated mirrors. It does not have rear window defrost. The mirrors will not defrost, So I checked fuse panel under dash and no bad fuses. We don't have a owners manual so we weren't sure which fuse was for mirrors. What should we check next??? I tried searching forum but couldn't find much about the testing of the mirrors.
View 13 Replies
I recently got a 2009 f350 lariat, the mirrors have the "heated" emblem on them but for the life of me I cant find a switch anywhere to turn them on, are they automatic?
View 8 Replies
I'm replacing tow mirrors on my 2004 F250 with 2008 mirrors. Both are factory Ford mirrors. Need wiring diagram since connectors and wires are different. They both have power mirrors, turn signals, heated mirrors, but are not power retract or fold.
View 1 Replies
I was adding some more running lights today and tried to tie in to the front running/turn signal light. Next thing I know I hear a pop and now no turn signals, hazards or brake lights on my 99 F250 SD V10. My 3rd (center) brake light does work though when I press the brake, it's just the tail brake lights that dont work.
I can't find a blown fuse for the turn signals or brake lights (not really sure which fuse box it's in since the manual doesn't tell me what fuse is what)
I however did find what I'm guessing are the flashers behind the radio. What might have went wrong where before I start dumping money in to flashers and relays.
The next question is, can I jump in to the marker/turn signals and add another single LED light to them off the front? If I can which color wire does what?
View 9 Replies
Coming back from a trip I got a e-brake light show up on the dash then noticed the signals stopped working and the heated seats no longer turn on. I scanned it with my AE and got a brake fluid sensor error come up but nothing about the signals .... is this a common problem or is there a connection between all this? 2003 F350 6.0L .....
View 2 Replies
Ok, I am looking to update to the square style mirrors with turn signals (nothing else) is this possible and is the wiring for my E99 already in place or would I need to add any thing else? Here is a link to the mirror set I am looking at :
99 15 Ford F250 Rear View Tow Towing Mirror Manual with Functional Signal Pair
Is what I am wanting to do possible, I know I could wire in the auto folding style with the stupid add a fuse crap and a button (easy enough)... or these...(power fold). [URL] ....
View 10 Replies
While cleaning the door handles the switch to extend and retract the side view mirrors hung was depressed and evidently got stuck as it was still pressed in. My hope is that this just blew a fuse and not burn up anything. The mirrors still fold and can be adjusted just not extended. Is there a fuse specific for this that may be blown?
View 2 Replies
How to remove the side mirrors (top and bottom) on my 2016 F250? I don't need to remove the entire assembly (off the door), just need to get behind the mirrors themselves.
View 5 Replies
I read in a thread about how fog lights need the auto light sensor or something in the kit to be installed and flashed.
My truck is a 2012 f250 XLT that I bought left over from a podunk town IN illinois. It does not have fog lights but it Does have automatic head lamps. So Im very confused on what kit to order to add fog lights to my truck.
View 3 Replies
2012 f250 diesel Lariat 4dr 4x4. He called me today cause he knows I do all the work on my own F250 diesel. He has heated seats in the back and he said that they turn on by them selves and they won't turn off. He had to actually disconnect the wire harness to get the heating elements to turn off so his wife's friends wouldn't burn their bottoms in the middle of august is Texas.. Any ways, he said both sides are staying on and wouldn't turn off using the switch.
I'm not very familiar with the heated seat wiring, especially for the back seats. I told him their may have been a relay that went bad, but now I"m thinking that they much have a controller or something that is acting up. He said that the front seats are acting normal. Also, he has the touch screen and navigation upgrade as well as auto climate control, not sure if this stuff matters for the back seats though...
View 2 Replies
I have an 2002 F250 super duty that has leather seats. The seats are power but not heated. I bought seats out of a Harley Davidson edition that are electric and heated. They have an extra plug that my truck don't have. How can I make the seat heaters work?
View 4 Replies
How to disassemble the power fold mirrors on my 2011 F250.
The mirrors work in every way except they will not fold in or out. You can hear the motor start but then stops right away. It does not sound like the gear is stripped just that the motor is stuck some home. It happened to both mirrors about the same time.
I was going to take one apart and see if there is a issue. I can't see there being a electrical issue, but maybe, since the driver side starts then stops within 1 second. It's hard to tell about the passenger side since the switch is on the drivers side.
View 10 Replies
I just got my truck recently, when I purchased it the power mirrors do not work. Already checked the 5A fuse and it is good. Tried putting in a new switch from O'Reilly's and still did not work. Are these switches supposed to light up like the window and lock switch? Thinking it might be a break in the wiring or motors are seized but I've read that is not as common.
View 1 Replies
The power mirrors on my F-250 works halfway. I can get them to move inward but not outward. They also will upward but not down. These are both mirrors. Could it be the switch?
View 3 Replies
I have a 1999 F250 Superduty with power tow mirrors. Both mirrors are having this issue. It seems both motors moving the mirrors are trying to run at the same time. I tried replacing the control switch since both mirrors are having the issue, but got the same results. Holding the switch to move the mirrors out causes it to move down and out. Moving it in and it goes up and in. I know from experience with electric on a vehicle that when funny things happen, its usually because it lost the ground.
View 1 Replies
My 99 250 XL only has heat, and the blowthru vent air which in Florida, might as well be heat also. LOL.
Since the vents and everything is there, what all and how hard would It be? I have an extra dash control that I can put since mine doesn't have the ac option on it
View 14 Replies
I've been looking at adding an additional diesel tank to my F-250, since the stock tank only holds some 38 gallons. However, I do not want to lose the space on the bed and have been looking at tanks that are mounted under the bed.
Most tanks I see are welded steel, completely overkill and accordingly priced. I'm wondering if a second stock tank pulled from a junkyard might fit in well, but haven't lowered mine yet to check the complete dimensions.
View 2 Replies
I recently purchased an 06 F250 XLT Crew Cab. I want to add the factory automatic headlights to it. Is there anymore to it than the photocell and the light switch that I need to make it all function? I'm adding the factory driving lights and getting the automatic headlight switch with the driving light option. I tried the search function but came up empty.
View 12 Replies
The latest addition to the driveway (2012 F250 XL 6.2) is getting ready to be geared up for it's tour of duty. The one thing that was on the would-be-nice but not must-have list was cruise control. This truck doesn't have it, which wasn't a deal breaker because the truck was way inside my budget.
So anyways, while researching hitches, tonneau covers, steps, etc. I came across this : [URL] ....
Is this all I need to install the speed control? I would assume the dealer would have to get into the logic and enable something, but is this switch really all the hardware I need to buy?
View 4 Replies
