Having a problem finding the right belt diagrams for a 2000 F53 stripped chassis in a motor home and the dealer has been no assistance even after spending a bunch on parts...
View 4 RepliesSee my sig for truck.
I have 3 kids in the crewcab. 2 are in booster seats, and 1 still riding in a Britax. The 2 in booster seats can buckle their own seat belts in the wife's Odyssey. But they cannot buckle their own in the truck because as they try to push the 2 pieces together, the short 'female' end slides down between the seat and seatback. So I have to buckle them. Every time.
Anything to prevent the female end from sliding down? I'm thinking maybe putting a ~4" long 1-2" diameter piece of tubing around the belts. Something like that.
Is there a hose diagram for the four wheel drive? My hoses are dry rotted at the hubs so I was wondering if there are more somewhere that I have to change?
View 2 RepliesI am looking for a wiring diagram for that taillights for a 1999 f350 pickup. I am working on a friends truck that doesnt have any taillights and I would like to have a diagram in hand before I get started on it.
View 7 RepliesI'm currently trying to swap out the standard AM/FM/CD for a DVD receiver with backup camera, and need to find out the proper wiring colors and pin position. I'd rather not send it to a stereo shop, as I've seen a lot of hack work by so called "audio installation experts", and besides.. I have a shop and can do the work myself.
I tried looking through AllData, but since my truck is too new, Ford doesn't release a lot of technical info for us in the aftermarket. Looking for a link to a Ford diagram?
Is there a more recent write up with pictures, special tool list and/or part numbers?
Early 1999 needs ball joints on drivers side. Should I just do both sides?
I'm gonna change plugs , hoses, belts and fuel filter on my 08V10. Hoping it works with the mpg.
Anything else I should look for or do? Is there anything I need to know about changing the fuel filter?
Looking for a wiring diagram for the coolant temp sensor? 1999 F250 SD V10....
View 4 RepliesWhat is the factory radio wiring colors or know where I can find a diagram?
View 14 RepliesLooking for a complete exploded parts diagram for the front axle on a 1999 4X4 F-250?? (If possible from the wheels inward.) Having some issues and really need this.
View 8 RepliesMy four wheel isn't working. I have a 2002 f250. When I turn my esof switch the dash light doesn't come on and when I turn on the lights the switch doesn't even light up. I'm going to check for power at the switch but I was wondering to get a diagram for the 4x4 so I can see if there's anything else I can check or look at.
View 9 RepliesJust got an inexpensive LED Stop/Turn/Taillight Bar my problem is it has (3) wires Red, Black and White while the available connection from the old bar has only (2) wires Black and White with Red Dots.
The wiring instructions for the new LED bar says (1) Attach black wire to tail lamp circuit(+), (2) Attach the Red wire to the stop/turn circuit(+) and (3) Attach white wire to a good ground(-) location.
How I should hook this up? My thought is Black to Black , Red to White with Red Dots and White to Frame metal.
I just picked up my 2007 F350 as a replacement for my 2003 F350 (still have the 2003). I really like the uplifter switch option on the truck, I can normally figure things out but I am one of those people who is electrically challenged (home and auto)and also am one who does not wish to butcher the new ride (same for the home)to gain an education in the art of wiring. I would like to reinstall my headache rack lights on this truck as they are needed for winter work. I was in my truck manual and the info for wiring is weak and the website did not respond nor did my email to ford. I have found the wire harness but it is not tagged as a pair/color to switch. I have the lights already grounded to the rack, so I am thinking I just need the hot wire from the switch. Looking for the color code for positive and ground for the switches.
View 14 RepliesI am looking for a site that i can download a service manual with good wire diagrams. I want to install an alarm with remote start and need to know what wires go to what.
View 2 RepliesFirst, need a wiring diagram for the outputs on the back of the brake controller module? I want to check and see if there is a problem with the connection to the rheostat. I can activate the trailer brakes with the slider bar but not with the brakes.
Second, where I can get a new OEM controller that will replace my old one if I can't "Cypher it out"?
I just had a headache rack built for my truck. Looking to wire in 2 very bright reverse lights, 2 not so bright lights to deal with stuff in the bed of the truck at night, and also mounted a receiver hitch so I can hook a winch up back there when needed. looking for opinions on wiring for all of this. Never wired stuff like this so I'm shooting in the dark. My wiring skills are adequate but not great.
View 7 Repliesi'm looking to upgrade my mirrors. A friend told me to get the 08+ mirrors but I can't find anywhere online that says they will work. I'm hopefully going to be purchasing on Amazon but not sure which ones to get. When I pull up the 08+ they say "Fits Ford 2008-2015 2008 2009 2010 2011 2012 2013 2014 2015 F250 F350 F450 F550 Super Duty"
Ive got the 2000 F250 V10
I have a 00 F250 7.3 4x4 and I am looking to get better mileage out of it since it is now a dedicated work truck for towing. The two options I have in mind I think will work, but just wanted some clarification and if one is even possible.
First I will be taking the lift off and dropping back down to 33 inch tires or so. This should give me a little, but if not it should be easier on the truck for towing.
And this truck mostly see's highway miles, so I was thinking about disengaging the 4wd. I heard 4wd trucks get worse mileage, so this is the one I didn't even know if it was possible. not digging in to the computer and injectors quite yet.
Have a 2000 F-250 V-10 4x4 with 335,000 miles on the clock. Has started hesitating at 40-45. You can't really notice it at idle. Drove it around at lower speeds and just a miss here and there. Take it up to 40-45 and it's quite bad. Hasn't thrown any codes. Hooked it up to the scanner to get no additional info. My gut says coil packs but am kinda confused that I haven't gotten a misfire code yet. What to check?
View 6 RepliesA vibration has just begun on my 00 f250 power stroke it's in the left front and happens when I hit a bump I changed out the wheel bearing assembly and I switched locking hubs with another truck all with no success don't know what else it could be it does go away if I lock in the hubs so idk
View 2 RepliesI have a 2000 I got new in sept of 99 its a good truck and id like to keep it as long as I can its got 173,000 on it I take care of it garaged kept and consistent fluid/filter changes all over top and bottom few minor addons like turbo bak exhaust from Silverline,auto meter gauges so I can monitor temps ,a bigger transmission pan aluminum I did years ago ,a gear vendor 8 speed addon years ago,diablo predator tuner with the 80 horse tune been doing great for a quite a while lately I noticed if I leave it idling in park for a few minutes while in a store r sumpn it won't shift outa 3rd its like overdrive is turned off I have to pull over and kill&restart 7.3 and take off its fine what in the wide wide world a sports is happening my overdrive switch has been out for a couple years I just haven't replaced it yet it gradually got worse when using it id have to pull shift lever in to get it to engage then put in neutral then in park now cant get it to work at all hopefully I can fix it myself but my luck is never that good.
View 5 Replies