Ford Ranger / B-Series :: Very Slow Leak In Overflow Tank
May 8, 2012
My overflow tank seems to be going empty slowly. The last time I filled it was in March and I filled it to the Full line. Now, the overflow is almost empty. I did 425 KM last night almost non-stop and the level stayed the same since that night and today. So, I am not burning any thru the gaskets. Exhaust is not white neither.
I did see one suspect thought. I have this really small rad at the bottom of the bumper and it seems a little wet around the tubes that enter it. Could it be that? I have no spots on the driveway or road when I park. Specs of my truck:
190 000 KM.
Oil changed on Saturday.
Runs well, no loss of power.
Temps are good.
View 3 Replies
Advertisement
Anyway here's the problem. My son has a 2000 Ranger 3.0L V6 he left me when he had to move back up to Las Vegas. I was out checking it out today and pulled the radiator cap, man what a mess. It looks like reddish mud in there and the overflow tank. It's not milky like oil in there it's more like mud. It's caked up on the bottom of the cap and inside the filler neck and the coolant looks the same.
So the questions are, what's the best way to clean it all out and what would cause it?
View 4 Replies
One last issue with my 2000 B3000 3.0L. The leak seems to be on the left (passenger) side of the water pump very near where the bottom radiator hose connects to it. I can't find any loose bolts. It does not leak while driving the truck or soon after. It has to sit for several hours or overnight before it shows up. There are usually 3 or 4 wet spots where it drips from the water pump to the frame to the driveway. It is small enough that I only have to fill up my coolant tank every 1 or 2 months. Could this just be a small gasket leak? It's been happening for about a year or so I think. I replaced the radiator about 2 years ago. I've been expecting it to get worse or bust loose and have been checking it very often. I've never seen one not leak while running like this-has me puzzled.
View 6 Replies
Aside from other issues I am having with my prius, this was one lurking. I originally thought the prius was "using" the coolant insufficiently. Anyhow, I bought this prius from a private dealer....(know how that goes)......
View 15 Replies
1993 ranger, 3.0 V6 203,000 miles. As engine warms up coolant in blown into over flow and spills out. At that point system is low and truck runs hotter than norman, 3/4 way across gage. What would be causing overflow to overfill from engine. Could it be a bad rad. cap? Just replaced head gaskets at 200,000 miles. Truck runs good. No oil in water, no sign of visible leakes other than overflow tank overfilling and loosing coolant.
View 10 Replies
I filled up with gas this week on my 92 Ranger extended cab and when it got to full I noticed it was leaking down the side of the tank in-line with the filler neck. I couldn't make out exactly where it was coming from. It wasn't coming out of the filler neck I know. I noticed I had been smelling a strong gas smell but I thought it was a bad gas cap. I've never dropped a tank on any of my Rangers. I've also got a 93 and 98 regular cab but always had someone do it. I know that on my 98 the big plastic lock ring deteriorated over time and I had to have it replaced because it was leaking when I filled it up. I'm suspecting the same on this 92. I got a print out of the fuel tank and components from Ford trying to prepare myself to have everything I need if I try and drop the tank myself to check. It looks like it has one of those plastic lock rings, a filler neck grommet, and some kind of vapor grommet. It shows some kind of shield over the fuel pump assembly. Will I need anything special to remove that big plastic lock ring, the hoses, or to drop the tank? I know it's got that heat shield around it. It looks intimidating. I don't want to break anything but can't afford to keep paying all the labor to get the small problems fixed on this Ranger. The only fuel tanks I've dropped and changed were on my 65 Valiant and 73 Charger but they required no special fuel line removal tools. Is anything going to be hard removing this fuel tank? I probably will put in a new fuel pump just to, since it's running the original 22-year-old fuel pump.
View 4 Replies
I have a 1999 ranger 4x4 , when I'm going to a slow final stop the abs kicks in ,doesn't do it every time , there's no abs warning light , took it to the ford dealer they scanned it and said it was the left front hub & bearing assembly, said the sensor wasn't reading the back of the bearing assembly. I can't understand way the abs light isn't on, is there anyway to clean that they want to replace the hub & bearing, Is a use hub & bearing replacement a good way to go? They told me I could pull the fuse and kill the abs, but I find three fuses I pull aII three and got a speed sensor check engine code. I hate to replace that hub & bearing when there's no problem with the bearing ,Is there any way to deactivate the abs, by the way it's 4 wheel abs.
1999 FORD RANGER 4X4 4.0......
View 14 Replies
Whenever I slow down for a car to turn or accelerate after a stop sign the ice cold air goes away and is replaced by warmer air but then it never turns back cold. Only when I kill the engine and start back up does it return. I just had the Freon refilled and there are no leaks.
View 3 Replies
How/why does fuel transfer from front tank to rear tank ? I put 6 gallons in front, drove about 5 miles, parked over night, all fuel now in rear tank which was empty.
View 5 Replies
i have a 02 ranger 4by4 with 4.0.every time i try to fuel the pu it spits gas back out the fill tube and i have to fill it very slow to get fuel in it.i just replaced the filler neck about 6 mos ago due to having a hole in the the hose by the local ford dealer,
View 6 Replies
I noticed that my ABS was engaging when I would slow down to a stop while turning left. I pulled the fuse for the ABS just to make sure that's what was causing the pulsating brake, and it was. Anyway, if it's an ABS sensor problem, would it be the front passenger side sensor if it's only happening when I turn left? Is there a way to test this. Would a scanner detect it? It hasn't been throwing a code or anything. Just the ABS engaging while braking and turning to the left when it shouldn't be.
View 6 Replies
I have a 97 ranger 4 cyl that's been making a whistle noise the last few weeks. The sound is literally like a whistle and the noise level varies but its never obnoxious or loud. The sound does not happen when truck is idle, seems to happen mostly when I first accelerate and slow down although sometimes it does happen when I am going 20-30. it doesn't happen all the time but lately its happening more. What this could be? The truck idles and runs great.
View 14 Replies
I have an 87 Ranger and the oil pressure gauge is slow to respond changes in pressure. Is this the way the gauge is designed to work or do I have a bad sending unit?
View 4 Replies
'94 Ranger with aluminum wheels.
I have problems with slow leaks and vibrations from multiple wheels. Both problems have persisted through multiple tire changes over the years. The same shop has always done the tire changes and they tell me they've been balancing the wheels and cleaning the inner rims. The vibration went away after putting on my B2 wheels. Then swapping the rears back to the ranger wheels, 2 at a time, the vibration was back for both test drives (hence vibrations from multiple wheels).
The wheels are badly corroded at the rims and valve stems which leads me to believe it's the wheels themselves that are causing the leaks. I haven't heard of excessively old wheels causing vibrations though which is why I ask. I will likely be buying some craigslist or junkyard replacement wheels but wanted to "check in" first.
View 10 Replies
This has happened 3 times.
1st) pulled quickly over to side of road, shut off truck. It would not start then. Towed it to service station and it started the next morning (with no repair made). I wonder if tow ride dislodged the the blockage in fuel line(?). Always sounds like it's going to turn over, but like not getting fuel.
2nd) Went to leave work, truck wouldn't start. Towed to my mechanic and he replaced fuel pump. Thought it was fixed because it ran fine until just the other day.
3rd) Slowed down to complete stop in heavy traffic and it stalled. Would not restart. Again sounded like it was going to start but didn't seem to be getting fuel. Good samaratins pushed me off road. Had it towed to mechanic. Started the next morning without any repair or service. It's like the tow ride and bumps getting it off the tow truck dislodges what ever is blocking the fuel line.
My mechanic replaced the fuel pump, but I don't think her replaced the fuel filter.
View 6 Replies
I have had my 1998 Mazda B2500 truck since 2000 and this problem comes and goes (it's mostly been gone lately). Usually when it is cold outside. At slow speeds it creaks and squeaks - kinda embarrassing - if I am sitting still it squeaks when I turn the steering wheel. Once the speed picks up you can't hear it. I have noticed this in other fords about the same year.
View 1 Replies
1996 F-150 5.0... So I bought this truck a couple months ago for a really good price and its my regular vehicle that I use daily. While driving I switched tanks from the front to rear and when i reached my destination i noticed that fuel spilled from the cap, I opened the cap and fuel overflowed. I've read in forums saying that its the Fuel Pressure Regulator or the Fuel Tank Selector Valve . It still drives and runs fine, but I would like to know which part its specifically causing the problem?
View 1 Replies
I got a 64 F100 with a 292 that I am thinking of installing a coolant overflow tank on to aliviate having to fill the radiator frequently.
The question being............Is it a sealed system or do I need to provide an air bleed to adjust for the presure change within the cylinder I intend to use?
I realise that thermal syphoning will return the coolant to the radiator but am unsure as to weather or not I need to allow the airspace to remain at atmospheric pressure.
View 5 Replies
1988 Bronco II 2.9L Issues:
- When I turn off the wiper switch the wipers immediately stop in place, they do not continue to their normal 'down' position.
- The switch's adjuster to slow the wipers isn't working, only the low and high settings work.
What I've done so far:
- Replaced wiper switch with used from spare parts.
- Replaced wiper switch with new from spare parts.
- Replaced wiper motor with remanufactured from Autozone.
- Thoroughly cleaned wiper motor ground terminals.
- Replaced interval wiper governor with used from spare parts.
The problem occurred after the truck sat in my garage for 6 months while I removed and reinstalled the engine to replace some gaskets & seals.
View 6 Replies
I have owned my 2005 v10 ex since 60000 miles. Have had many dependable family road trips and love my truck.
Recently it has started puking coolant and the overflow tank smells like exhaust. The oil cap has some coolant sludge on it. But there is no coolant mixed with the oil. Or oil in the coolant.
I am pretty certain these are the signs of failing head gaskets. The truck has 193000 miles on it now.
Want to keep it on course. But keep it reliable. So do I buy new engine or do I just replace head gaskets?
View 14 Replies
I have a 97 F-150 and my Radiator fluid has been leaking very bad but hasn't been taking the fluid from overflow tank. Actually the new fluid that I put in the overflow has now turned a rusty color....
View 3 Replies
