Started the other day. Seems like the blend door that channels air to the dash vents is opening and closing as it feels like it. Sometimes open for awhile, sometimes closed. The defrost vents keep blowing cold and normal while doing this.
View 9 RepliesCompressor clutch engages, lines are cold, when it works air is cold. A/C guy thinks the blend door isn't working right, is it vacuum operated or electric?
View 3 RepliesI purchased a 6.7 Diesel 2014 F250 Super Duty Crew Cab about 3 months ago. Yesterday I started my truck using the remote starter from inside my house. Seconds after I heard a loud noise. Looked outside, saw nothing and thought nothing of it till I went to open my door and realized that the driver door window shattered! I live in a quiet area, it wasn't a rock thrown at my truck or anything like that, it just Blew!!!!
I'm wondering if the truck might have some sort of pressure or torque if you wish on that window to make it just pop! My mirrors were folded in however I can't see that playing a role......
My actuator/motor doesn't have the screws that hold it on. It's just clipped down. Can I just pry it up & off with out it breaking the clips that hold it down? It's a 97 Ranger.
View 2 RepliesIt's a '99 Montana EWB.
OK, I know I have an issue with clean water entering the cabin and depositing itself in the channel next to the driver's side rocker where a fair number of wires are located. It filled with water last fall and I dried it out and never thought too much more about it, but knew there was water coming in somewhere. At first I thought it was the AC, but the drain is clear and running.
It's similar to the damned TSB Bulletin No.: 01-08-45-005E that is a sticky here on the forum.
This time however, I didn't check for water in the fall and this morning in a blinding snow storm at 14F the power sliding door acted up 5 minutes before my wife left for work. By the time she got to work the damned TCS and ABS idiot lights came on, and she says the sliding door attempted to open, but she got it to close.
Now the van is 20 miles away and I won't be able to look at it until I can get it home and try to dry it out again. In the driveway in a snow storm!!!
If GM had been a little more specific about the root cause of water issues mentioned in the TSB, it would make life and fixing this problem that much easier.
So lately I have noticed that my front doors have quite a bit of noise in them when opening and closing. I went to the store and purchased some grease it toned it down a little but the noise it still there. I know the noise is coming the bar that goes inside the door. Is there some that keep the door quiet? My door are not bent at all.
View 4 RepliesI have a SAAB 2000 95, and the heat isn't working. I was told by a local shop that the blend door motor isn't opening to allow the system to switch from air to heat. He said that the heating system was working, but that the hot air can't exit the dash. He said it would have to be repaired at a dealership.
View 3 RepliesMy drivers side door just started clicking when opening or shutting ...
View 9 RepliesMy 97 e350 club wagon is doing something weird. Front AC wont go to Max Air, the blend door wont function. Can hear vacuum trying to work. Rear Unit is on Heat even though Front is on AC and blows hot air out the rear floor vents. Hit some high water going too fast about a year ago. Next day, this started happening. Rigged up blend door so air flows through vents.
View 2 RepliesMy 08 gs350 makes a clicking noise when you open the doors really wide and again as you close it. I've tightened all the screws around the door check... Also lubed it as good as possible.
Could it be something to do with the door check pin? How do you replace it?
My jeep liberty 2002 has been sitting for two weeks. Noticed rear door latch opening and closing. So I unhooked battery. I figured battery was dead tried to hook charge to it but it keep discharging kicking off charger. Whats going on? Tried jumping but it was still discharging?
View 5 RepliesI have a minor squeak opening and closing the driver's door. Any recommendation for the best lubricant to use on the hinges? Is WD-40 acceptable or are there better alternatives?
View 5 RepliesMy front left door, when opening and closing, makes that grinding/clicking/popping type noise coming from the hinges (I'm guessing)...I'm searching for the correct word to use to describe it...like when the door would be off kilter or something and the metal is catching...if that makes sense...you can hear it when moving the door, not just at the halfway point of being opened/closed where it will stay in that position ... There has been no damage to that area...no weight put down on door when opened...and it started out of nowhere.
View 4 RepliesMy driver and my driver side passenger (slightly) door squeaks when I open and close it. I know it has to do with the door checks. The black plastic thing that holds the door open 1/4 or 1/2 way. I don't want to try something that might not fix it like greasing it. I don't want a glob of grease on there and it still squeaks. Is there a way to adjust it?
View 8 RepliesI checked my rx350 battery health and it is good. Still I am having recurrent issues when battery dies. And needs a restart. It happened many times and last one just happened this morning and I have feeling that this is related to rear hatch door...let me explain what happened:
Yesterday evening I went for grocery shopping and opened the rear hatch door using my car key remote, kept the groceries and closed the rear hatch using the button on the bottom of rear hatch door. I drove back to home and parked the vehicle in the garage. This morning I opened the rear hatch again and closed it, drove it to a house one block away, returned home and parked the car.
When I tried to start 1 hour later, the battery had already died. So, I have a feeling that opening and closing the rear hatch door 3 times caused this battery drain.
Having issues with the blend door on the AC system. I will have it on AC or MAX AC. I will have it on the setting to be point out of the dash at me. It occasionally will switch to the defrost windshield setting. I can hear the blend door moving and changing from chest level to the windshield.
View 12 Replies2006 Solara. When opening driver side door it makes a very loud clicking noise at the 1st and also at the 2nd stop. Same thing when closing the door.
View 2 RepliesWe have been tolerating a bad squeak in the driver's side front door upon opening, closing (any type of swinging of the door). Dealer tried lubricating it with no success. They told us that they would order a new hinge and "hope" that resolves it. I am a little worried about this. Would you trust your dealer to remove and re-install the door or just live with the squeak?
View 5 RepliesI have a 2013 Lariat with 135K miles. Yesterday started a loud and consistent clicking under the center dash. When I turn the heater up to 77 degrees or above it stops. I have dual AC controls and the passenger side will now occasionally blow hot compared to the driver side when I have them on the same temperature.
Based on what I have researched I need to replace my heater blend door. Need to confirm if this sounds correct? Are there different blend doors for driver vs. passenger side repair?
As importantly I am looking for a good set of instructions on how to gain access to the heater blend door motor in order to take care of the replacement myself. My understanding is it is a $40 part buy may be heavy on services due to access. My 2013 is stocked with the sync touch screen / navigation option .....
Recently when I adjust the temperature, there is a clicking from under the dash. It sounds like the Blend door is stuck.
View 7 Replieswhat i have is the driver's side door on my 1999 ranger is hard to open, the door seal sticks to the door and makes it hard to open, i am afraid of breaking the door handle off, is there any thing to clean seal with to make it not stick? the seal is not sticky to touch neither is the door but when out in the sun for a while they stick together, mechanic told me to spray with wd40 that didn't
View 2 Replies