Ford - Ranger :: 1997 - Indicator Lights Stayed On After Key Was In Off Position
Oct 29, 2014
I went to start my 97 ranger this morning and when I turned the key I got the standard indicator lights. Then when I tried to start it there was nothing no click no crank just quiet. When I turn the key back the dash indicator lights stayed on even after the key was in the off position and removed from the switch. I tried it a few more times and the same thing happened. I had to disconnect the battery so the indicator lights, radio, etc. would not drain the battery.What do I need to repair this.
View 16 Replies
Advertisement
I have a 98 f150 4x4, 4.6L 150k miles, during start up the blinker indicator lights on the dash illuminated and stayed on, when trying the blinkers they did not work, but if I shut the head lights off the blinkers do work and indicators respond normally. This is the same if I turn the fan blower on, blinkers don't work and indicators stay illuminated. Also I have found that the power windows, and 4wd no longer work. Other functions work such as power mirror, radio etc. all fuses under the dash and under the hood are good, I tried switching some of the relays to see if that changed anything but with no success . took the kick panel off and inspected the grounds and all seem tight. It looks like the main battery ground is just to the body and there is one solid ground from the frame to the body under the cab. all seem tight and don't appear to be corroded. Truck starts and runs great.
View 8 Replies
I had a dead battery in my 2002 Solara. After I had it replaced the indicator lights on the dash would stay on. Also the fan blower will keep running if not turned off. So I have accessories running with the key in the off position. I have checked all fuses and they appear good. Bad ignition switch?
View 3 Replies
My '96 ranger with a 4.0 auto will be running fine and then dies. When you go to start, the engine will will crank over. Also notice that there are no lights coming on the dash when the key is in the run position. A few hours latter the truck started right up. Not reading any codes. Transmission was rebuilt a few weeks before this problem.
View 6 Replies
I have an issue that popped up on my 2012 F-150 today. I was driving a bit today and when I returned home and shut the truck off I noticed that the right turn signal indicator stayed faintly illuminated. None of the lights outside are affected, and they all work normally, just that the indicator on the dash is staying lit.
The only thing I can see is that last week I smashed up the drivers side mirror and it busted the lens off of the LED lights in the mirror and 1 LED bulb is exposed. It did rain a bit today but I figured it would short out and blow a fuse if anything.
I will undo the negative battery cable tomorrow and see if it will reset, if not I will have te dealer check it out when I drop it off to have the roof reprinted next week.
View 11 Replies
While I was trying to park, I heard a clunk, wheels stayed in the same position. The steering wheel is loose as hell, it literally feels like its buttered up and wont turn the wheels at all, what to buy to fix it? I am thinking I just need a new gearbox....
View 6 Replies
My 4 wheel drive is not engaging on a 2001 F150. The indicator lites on the dash illuminate to suggest that the truck is in 4 wheel drive but sigh...it stays in 2 wheel drive. No gross sounds and the indicator lights are not flashing. Could this be a fuse or a relay issue of some sort. What else should I try?
View 3 Replies
I have a 1997 F250 that I am fixing up. The issue is this... The dash lights now flicker off when I place the transmission in Drive position. I can slightly move the slack in the gear selector and the lights come back on. When the transmission is in Park, the dash lights work correctly. Not sure why there is some type of switch to control the dash lights buried within the steering column?
View 2 Replies
98 Ranger 4.0..4WD ex CabXLT Automatic..started the engine yesterday and my charge light came on and stayed on. Checked the guage and it showed no charging and then slowly began to charge and the light went out. If I rev the engine above 2,000RPM's the charge needle starts to drop but if I keep RPM's below 2,000 charging is okay. Is this the sign of a failing alternator? The belt only has about 20,000 miles on it and tension seems oksy
View 4 Replies
Just Bought 97 Ranger 2.3L 5 speed. Everything worked except interior cab light and cab brake light. Also the wipers and A/C blower only work on highest speed when I bought it. I assumed there was a problem with the switches, bulbs and/or fuses. But when I picked it up last evening I noticed the dash lights were very dim on the way home. Then when I got home I shut everything off and removed the key. I then opened the drivers door and touched the brake pedal and the dash lights and the parking lights came on along with the "key in ignition" bell alarm each time I touch the brake pedal. If I close the door the dash and parking lights come on but the key in ignition does not sound. With so many things malfunctioning I don't know where to start.
View 7 Replies
I have a 97 ford ranger V6 4.0. my 4x4 lights flash on my dash board 6 times and go out, a few minutes later it does it again. When I lock my hubs and put it in 4x4 nothing happens. What could be causing this?
View 5 Replies
I recently bought my first EX and I finally had enough of looking at this
The transmission shift lever indicator not being in the proper position needed to be fixed!
After some searching, I realized what the issue was and was quite surprised that the "fix" is replacing the entire shift lever indicator assembly. Seems overkill but right on par of with the way the world works nowadays.
The other solution I found was by a company called Dorman. They make a Shift Indicator Cable Bracket, which is the only part that was damaged in my case as you can see here. The white part pointed at by the arrow is supposed to be attached to the rest of the white plastic.
I looked around the garage thinking I need some glue. And something to reinforce the freshly glued parts. That should have been much more difficult as I don't regularly fix tiny plastic parts BUT I quickly came across this old external hard drive cover.
Broke some tabs off, trimmed them to size and poured glue all over the place.
This is what I ended up with.
Now my OCD can focus on something else
View 2 Replies
My wife came in the house the other day and told me my lights were on. When I went out to see, they were not. I chalked this up to the sun reflecting on the truck. Later I was working in the driveway and saw them come on, they stayed on for a minute then went back off. Strangest thing I have ever seen. The keys were hanging on the hook in the house. I checked the light switch and it was in Auto. I moved the switch to Off. Later that night I saw it happen again. They came on for a second them right back off. This is a 2010 F-150 4x4 Lariat. I have about 120K miles. What might be causing this or steps I can take to narrow the troubleshooting?
View 3 Replies
The dome light and door ajar light on my 97 Ranger stay on. The switches are good, is there a relay or other device in the circuit?
View 9 Replies
I am coming out of a loaded Treg that had its footwell lights on low while driving the car, which I really liked. While my new B6 also has footwell lights they turn off once the car is started up. Is there any way to get the footwell lights to stay on from the MFI? Can it be VAGGED? Or is there no way to do this?
View 13 Replies
My engine light started going on intermittently, and shortly thereafter it began to be difficult to change gears. I brought the car to a garage, and was told I need a new clutch (I have 50K miles on the car). However, the engine light says that there is a problem with the "clutch pedal position indicator."
The mechanic says that the position indicator is a separate problem, and I still need a new clutch. I don't know much about cars, but it seems to me that if the clutch doesn't know I've pushed the clutch pedal, that would explain why I have trouble changing gears.
View 3 Replies
Last night I drove to pick up my wife from work, well I got to the place and put the Touareg in park and shutdown the engine. The light switch was in Auto as it was getting dark and the lights had come on while I was enroute.
When I shut down the engine the interior lights stayed on, as well as the taillights I noticed. I sat in the car waiting for 10-15 minutes listening to the radio with the interior lights on. Was I draining my battery? Should I not do this in the future by switching the light switch to off from auto?
View 4 Replies
Today, for the first time the back up lights stayed on when the car was turned off. What causes this? The lights went off when the car was restarted.
View 1 Replies
My .:R will not start/ stay running. I just put my turbo back on. It ran great when I pulled the turbo off to get it rebuilt. When I first started the .:R, it fired right up and ran okay. About a minute later it shut off like I turned off the key. I went to restart and all I got was cracking but no start. I checked everything over and tried again. It started but shut off about 30 seconds later. After that I couldn't get it to start just cracking. I gave up for a few hour to gather my thoughts. I went back and no start again.
So I disconnected the battery for a few minutes and tried again. It started but shut right off after a minute and wouldn't restart. So I disconnected the battery and tried again. It started again, so I revved the motor to about 3500 rpm and let it sit there and about a minute it shut off like I turned off the key. NOTE: All the dash light stayed on like the key is on but the engine acts like the key was turned off. The ECS light stays on the when the engine is running or not.
View 13 Replies
Last night we went to look at some Christmas lights in a drive through park. There was a sign in the beginning of the park that said "Headlights off please." This seems to be impossible on the Touareg. I turned the headlight switch to off but the daytime running lights stayed on. After calling my salesman at VW, he asked many service techs how to do this and they have never been approached with such a question. They were stumped. The salesman told me that I can shut the daytime running lights off by depressing the emergency brake but that doesn't even work. The lights still remain on. Is there a way to shut the headlights off?
View 24 Replies
I have a 2003 Variant V6, 34,000 miles - I was pulling out of a parking spot and the car had no "power". but eventually it kicked in..then when I got home I noticed that the brake lights stayed lit...no problem, I pulled the fuse so the battery wold not run out...put the fuse back in for the ride to the dealer, but a block out and again no power - depressing the gas pedal had no effect. Could these be related? The cars been at the dealer all day, they have no clue so far. I had the fuel pump replaced under recall...could it be some sort of electrical problem.
View 4 Replies
