Ford - Freestar :: 2006 - Intermittent Function Of Remote Keyless Entry System
Dec 5, 2012
The keyless entry for my Freestar has just started acting up out of the blue. It will occasionally work after repeated button pushing on the fob.
It does this for both fobs
It does this for all buttons on the fobs
I have tried changing the fob batteries
The door buttons inside the car work just fine
What can cause intermittent functionality of the keyless entry system? Is there a box under the dash I can unplug/replug or a fuse I can change?
View 1 Replies
Advertisement
Randomly, the remote keyless entry system of my 2009 Jeep Wrangler will fail to unlock the doors. When this happens and I then use the key in the door the alarm goes off. As soon as I insert the key in the ignition the alarm will deactivate (as it should). After the first few times I took it to the dealer and a computer was replaced. It kept happening. I took it back to the dealer and now they claim that it is normal! If I use the key to unlock the doors otherwise, no alarm. So, why the periodic failure?
View 3 Replies
I've recently purchased an off-lease 2007 Sonata and have the following question about the keyless entry. When I unlock the doors I notice that there is a short flashing of parking lights, however when locking the doors with the remote there is no indication.
I believe the manual says there ought be a short chirping which I am not hearing. The remote is just for keyless entry (no alarm is present). While this may be related, I find the horn sound is not very robust (actually quite puny). Is this normal for this car?
View 12 Replies
I'm putting in a remote starter keyless entry in my 2000 f150 I have all the wires figured out except for the remote start part. Where the wires listed in the photo go? I do have the module required.....
View 3 Replies
As the title states, I have a 05 Sport Trac, just plain Jane. No keyless entry, no remote start, no steering wheel tilt. Just standard. I am wanting to install a Viper 4103 remote start/keyless entry kit to it. I just don't know if I will need any extra parts? I've tried googling and all kinds of stuff but cant find a straight answer. Some sites say I need an immobilizer bypass, some say I don't.
View 1 Replies
Let me start by saying the car is the 2002 ford focus and has a remote starter keyless entry and alarm that has been in stalled years ago so the one day I'm trying to go inside my car and the unlock button on the key fob doesn't work so I put the key in the door and open it all the doors unlock.
I ignored it when I'm leaving the car I lock it with the key fob it chrips then my son rushes outside and opens the door. That's when I noticed the door didn't lock then I try the door switch to lock and unlock the doors but nothing happens I tried the passenger switch nothing
Symptoms : Both driver and passenger door lock switches are not working If I hit the unlock button twice on the key fob all the doors unlock...
View 2 Replies
I recently purchased a 1999 F250 S/D v10 5 speed ext. cab and only received one ignition key (no keyless entry fobs).
The truck does not have a keypad on the doors, but if this truck has the remote keyless entry option, how can I tell?
View 14 Replies
I have bought a used 1999 F250 4-door 4X4 7.3. Is there any way to tell if my truck came with a remote for the keyless entry. It has power door locks and windows. I was debating on calling my local Ford dealership and seeing if they could check by the VIN number.
View 7 Replies
How do i program my keyless entry remote to my 99 grand am?!?
View 3 Replies
I have a 2005 Prius. The remote keyless entry just stopped working for locking and unlocking the doors. I replaced the battery and it didn't affect it's performance. The key will still start the car without inserting it into the dashboard. It feels like the unlock portion of the remote is "stiff" and does not depress. It is toyota model number B31EG.
View 2 Replies
I noticed today that the red (panic) button cover is lost from my keyless entry (silver Toyota logo) Gen II 2008 remote.
What I basically need is a broken remote, essentially just that red rubber cover.
View 7 Replies
I have a 2005 Pruis and the remote entry does not work. Changed the battery in the remote and I still have to put the remote key in slot to start the car. Been working fine for ten years.
View 5 Replies
If your truck came with the FOB to open the doors remote, but not the keypad on the door, you can add one. Originally the keypad was hard wired and was an expensive option. Several years later the newer keypads were RF signal just like the FOB. If you have or had FOB, then you have the keyless module on the truck (mounted to firewall infront of the emergency brake).. All you have to do is buy the newer style RF keypad, stick it to the door, and program like the FOB. I just did this on a 2002 F150.
View 5 Replies
I have a 2003 Camry I4. My RKE stopped working. First I checked the battery in the remote, it reads 3v like it should. I searched and found how to reprogram the the receiver, so I tried that. I did the door and key dance and got to where when you pull the key out and the door locks lock then unlock. I try pushing the lock and unlock button, then just the lock button as per the instructions and I get nothing. Supposed to get one cycle of the locks if it works and tow cycles if it doesn't. I get neither of those, nothing happens. So I buy a new remote off of eBay (brand new, never used, OEM remote). I try the reprogram door dance again and get the same results. The battery in the new one reads 3v like it should as well. So I go off to a junk yard to replace the receiver door controller, I found one and replaced it and I get the same exact results.
View 8 Replies
I have a 95 f-250 psd with factory remote keyless entry. about 3 weeks ago i had a fuse blow that powers the keyless entry module, speed control, and a number of other systems.
If I replaced the fuse it blew right away so i got my wiring diagrams out and started unplugging parts of the circuit and my last attempt was to unplug the keyless entry module. presto no blown fuse so i got a module from a junk yard fixed the problem and now it has happened again. same exact thing. unhook the module and no blown fuse. i took the first module apart and saw no burned parts and no visible damage but here i am blowing fuses with no door locks, dome light and a few other things.
The fuse that blows is fuse 8. I am a mechanic and have full access to anything I need. I have another module under warantee but I want to be sure that its not something other than the module causing problems.
View 6 Replies
What would be involved with removing the keyless entry system on my '02 F150 XLT so that I can install it into my '97 Explorer that I am fixing up. Is it integrated into the main computer or is it a totally separate system? If so where is it located?
The Expo already has power locks just not keyless (or at least I never received the key fob for it when I bought it) I have shaved the door lock cylinders and am fabricating handles to be hidden in the window moldings.
View 1 Replies
Nissan Rogue SV 2011 is keyless entry vehicle. When using remote starter, the engine shuts off when brake pedal depressed and the car is restarted to drive away. does this 'turning off/turning on' the engine damage any of the systems of this vehicle. it just doesn't seem a good idea to have the engine turned off and then immediately turned on.
View 5 Replies
Well after install many of stero's,wiring phone system,etc I though I could install powerlocks on my 07 f150 xl.
I have a basic understanding on how this alarm works but I have a few questions. First her is the diagrams I have to look at. [URL] ....
Like I said I have installed the power locks in the door panels but I do not know how to hook them up the the brain. Do i use relays? or do I just connect a lock wire and a unlock wire to the lock motor? If I do use a relay do Can i daisy chain the unlock output and the lock output?
Once I can get that figured out I just wire the rest of the brain up to the information I have for the wiring diagram for my truck. 12V to the ignation, Find lights,etc...
View 14 Replies
The other day it was a cold morning so I went out and started the engine to warm it up, heat the seats and clear the windows. I was on the train this particular day so the wife was going to drop me at the station, dropping the kids at the bus stop on the way.
We got as far as the bus and no further as darling wife hadn't picked up a key so following the stop we could neither start the car nor lock it. Fortunately the crisis was averted as miraculously a friend passed by soon after and ran me home for the key so I made my train, just.
Moral of the story is if you start the car with Keyless start always leave a key somewhere in the car.....
View 4 Replies
I have a 2008 Chevy HHR. On Monday both the key fobs for the keyless entry system quit working. I took both fobs to my local auto parts place where they had a tester and both seemed to work ok. What inside the car receives the signal from the remotes and activates the locking mechanism. All other electronics within the car is working. On Monday we had to have the car jump started when someone left the key in the ignition on Acc setting. Besides testing the fobs I changed the fuse for the Body Control Module (BCM).
View 1 Replies
My brother just bought a 2006 Ford Explorer XLT 4x2 4.0 V6. Where to find the code for the keyless entry? I took a look under the dash "driver side" but didn't see anything....
View 4 Replies
