Ford - Focus :: 2005 - Started Making Noise Like Motorcycle Coming From Behind?
May 5, 2013
Several weeks ago my car started making a noise that sounded like a motorcycle was coming up behind me. The noise started in at 65 mph and now, weeks later, starts in at around 35 mph. I have had the muffler checked and the CV joints and everything checks out okay. The noise does not change if the car is turning left or right. The noise is also, curiously, no louder with the windows open or closed.
View 4 Replies
Advertisement
'05 Gx470 w/ 93k mi. Time for new parts for all orig. frt. suspension? Started having "Clunking" up frt. Assume time for new shocks all around. Also, grease from upper ball joints half-way down steering knuckle arm, so probably dry? Thinking of replacing everything up frt. incl. hub bearings while have all apart and be done w/ it. Notice in FSM that this means replacing both upper and lower control arms that come w/ bushings and ball joints installed. Parts very pricey even w/ discounts ( 27% at myLparts), somewhere around $3,500 +/-, incl. rr. shocks. Rather cry once and hopefully get get another 90K +/- mi. w/o problems. I've always gone w/ OEM parts in past and probably paid the price, but since I'm doing all the work, hopefully evens out in long run.
View 1 Replies
2005 Subaru Outback XT 2.5 ... We were driving yesterday and the car started making a whirring noise as I accelerated. No noise wen not pushing on gas. Then, the noise mostly went away. Then we heard a rattling noise. Sounded like it was near the front passenger tire. After about another 10 minutes, the check engine light went on and the cruise control was disabled. On our way home (after we stopped to ski), the rattling wasn't so loud, car seemed to be driving fine, but CEL is still on. deas what this might be? Is it safe to drive it about 15 miles to the closest AutoZone to get the code? Or straight to an independent shop?
View 19 Replies
So 2 weeks ago I noticed that after 30 minutes of driving on the highway my steering wheel started making a loud growling noise and vibrating really hard! When I hit the brakes it got worse but got better as I slowed to 30 mph. It doesn't happen all the time and not right away, only after a while of driving and the dealership says without codes they can do nothing...
View 7 Replies
So the car was unused and sitting in snow for about 2 months. Now the car will not start, and actually does not make any noise when key is turned. No lights inside the car turn on. No automatic or electronic buttons work at all. Is this a totally dead battery or starter (since it makes no noise with key in ignition) or something else (e.g. electrical)? I tried to jump start the car which did nothing (but honestly not sure if it was done for a good enough amount of time... about 5 minutes).
View 12 Replies
My 05 Explorer has started making a like slightly jumping motion and thumping sound when I let off the gas. It seems to maybe happen when it wants to gear down but it I give it the slightest gas it quits. Do you check the ans fluid when it's hot or cold? I checked it hot and it ran out.
View 1 Replies
I just purchased a 2013 Ford Focus hatchback SE Monday night. Tuesday morning I came out of the house to get in my car, I unlocked the car, and opened the door. Before I even got into the car I heard a "scratch scratch scratch whirr whirr" coming from the engine. The dealer did not show me where the hood latch was so by the time I figured out how to open the hood the noise had stopped (within a minute of when it started.) Driving that day I did not notice any more noise, nor any issues with the engine.
Wednesday morning (today) I came out to get in my car, and when I opened the door I heard the same nose coming from under the hood. I got the hood open and looked in with a flashlight while the nose was still going. The noise was coming from the right hand side of the engine block, but I did not see anything actually moving to cause the scratching and whirring noise.
View 7 Replies
Here is what happened. I bought the truck used a few years back. The A/C clutch always made a clunking noise when it engaged first thing in the morning but then when restarting later in the day no noise. No noise either once it started up, the compressor ran quietly.
Then I recently went camping, it was just this past weekend and we had a bunch of rain. So I had on the front defrost mode on the heater for the windshield. I let the truck idle for about 15 minutes. The wife noticed that the truck was overheating (I have a Taurus fan installed and the fuse blew on the controller thats another story for another time, I got that fixed. I think it was because the clutch was trying to engage but couldnt and it made the fan controller overheat and the fuse blew) So I popped the hood and it was smoking under the hood. So I turned off the defroster and hear some noise under the hood. The AC clutch was not engaging when on the defroster mode and is making a clunking/grinding noises all the time now.
When I returned home I checked the fuse for the AC clutch and it was blown. So I replaced the fuse and it engaged the clutch by turning on the A/C, the clutch engaged and the compressor sounded fine and the clunking noise went away, it also blew cold air all the time the A/C was on, with this it looks like the compressor is fine.
Then I tried the defroster setting again to simulate what had happened at the campground and the clutch was engaging at first then started to slip and I could smell it burning. So I shut it off. The A/C clutch is still making a clunking /grinding noise noise and wont engage at all now even when turning on the AC.
So for a second opinion from all of you, does it look like I can get away with just replacing the clutch assembly? Also does the clutch assembly come with the new magnet, bearing, and plate?
View 6 Replies
My car is making a strange whining noise - a bit like the transmission noise on a Japanese motorcycle, or the noise a radio makes if the suppression isnt there. It goes up and down in pitch with the engine revs - so is 'something' attached, or internal in the engine. It sort of started around about the time the fuel recall was done, but I cant say for sure that it was exactly then. Its prevalent enough that you cant hear the normal growl of the engine. A Bearing maybe ???? water pump ?? AC compressor ?? (Its still there if you turn off the AC, BTW).....
View 1 Replies
I drive a 2001 Ford F150 4.6L , Miles at 175,000+ (a little more but no more than 176k)
Situation as it happened : Driving home from work for lunch, about halfway home I notice that my Oil Light is on and the Gauge has dropped to below the "L." Engine started making noise, best I can compare it to is to the sound of a diesel engine when it's idle. Immediately pull over after noticing this, shut off engine for about 5 mins, check oil, oil is fine. Turn truck back on, light is off, gauge is normal, and noise isn't as loud as it was before. Drive rest of the way home no problem. After deciding on driving the truck back to work (I know i shouldn't have but I have no other means of transportation, and I work at Autozone so I wanted one of my managers there to check it out) I turn on engine, everything is fine, no oil light, gauge is in the middle of the "H" and "L", only thing wrong was the engine noise, except like earlier it wasn't too loud or shaking the truck. About halfway to work, I come to a stop sign, Oil gauge shoots down below the "L" and the oil light come on.
As soon as that happens engine starts making same loud noise as before (diesel truck idling.) I push the gas to get past the stop sign, and instantly truck loses power in pedal and just shuts off. Make it to side of road, hasn't turned on since. Never had any problems with the truck since I bought it 5 months ago, changed the oil 1 time about 2 months after I bought it. I'm just hoping my engine hasn't seized up on me.
Not sure if this matters, but about 4 days prior to this, truck was making a rattling noise, almost like shaking a can of paint , under the front drivers side, in the suspension. Was told those were probably due to my sway bar link bushings being busted.
After some research on here and other websites as well, I have come to find out that this is pretty common in most Fords? Most people recommend changing the oil pressure switch, and others say it could be the oil pump? Was planning on changing out Oil Pressure Switch, and changing the oil filter/oil , and fuel filter as well. Not sure what else I could do?
View 6 Replies
I have a 1997 F150 (truck in signature). In December my passenger side parking brake cable broke so I replaced both rear cables (front cable appears in good condition).
This past Friday the passenger side brake started making a grinding noise so I pulled the drum to find the self adjuster cable broken and the ratchet jammed between the shoe and the drum. I pulled everything apart and put new shoes (the pin the ratchet pivots on was broken off the rear shoe)and all new adjusting hardware (adjuster screw, ratchet, cable, and cable guide). The rest of the hardware looks in good condition (still paint on the springs and retainers). I got everything put together and took it for a test drive, it had a nice firm brake pedal (it's been a while since this truck has had a firm pedal) and great stopping power.
Took it to work today, and on the way back I stopped to pickup a package from the UPS store. I set the parking brake and put the truck in 1st like I always do. When I got back out to the truck to drive home, I released the parking brake but there was still obvious drag as I drove home (no good place to stop during rush hour), got out of the truck and it reeks of burning brakes. I pulled the driver side drum off (after it cooled), which was rather difficult, and everything looks to be in order except the rear shoe was not touching the post at the top of the backing plate. I checked and the adjuster was still all the way in, so that isn't the issue.
I pulled the parking brake cable out to slack the drum side of it (with the pedal released there is some spring tension from the pedal mechanism) and clamped it with vice grips so the cable was slacked and the shoes were then touching the post, and the drum could be installed and turned relatively easily, I then removed the vice grips and let the spring pull the tension out of the cable and the brake held firmly (requiring considerable effort to turn the drum). Is there anyway to adjust the spring tension on the parking brake cable when the parking brake is released?
Additional notes: when setting the parking brake, the pedal will only go down an inch or 2 before the brakes are locked up tight and the pedal won't move, it used to go down several inches before. also I noticed that the feral on the end of the drivers side cable (that locks into the lever attached to the rear shoe) is deformed, like the cable has too much tension on it. The cables are the correct ones for my wheel base according to Autozone but I'm starting to wonder if they are too short. Spring tension on the parking brake cable (when the brake is not set) causes the parking brake to drag. How do I get the parking brake to stop dragging? ("star" adjusters are new and adjusted all the way in).
View 7 Replies
My wife has a 2010 Explorer 4.0 with 46000 miles on it. Yesterday the compressor started making a grinding noise when you turn the defrost on. It's only when the clutch kicks in. I'm hoping its something simple but, I fear its not.
View 8 Replies
I have a 2012 3.5 eco boost. It has 82,000 miles. I just purchased a large travel trailer. That is the first thing I have ever towed. When I was accelerating onto the interstate the engine started making a chirping noise.( not the normal turbo whistle). It went away when the rpms came down, and now every time I accelerate, it makes the same noise around 2000-2500 under load.
View 6 Replies
Well, I last summer my fuel filter/ pump started squealing, and making vibrating noise, replaced the fuel filter changed the noise slightly, some times it would go away, sometimes the line going to the filter under the hood would vibrate, couple weeks ago truck warning light came on- "low fuel pressure warning" came on, hum... went out, came on a couple days later, then finally put me into limp mode, luckly only 1/2 mile from home... checked filter on frame/ tightness, it was tight, the pump on the filter housing was very noisey still, well, I figured 200 dollars cheaper than taking to ford....
I waited and pump arrived 3 days later, replaced it and low pressure warning still on, but pump was very quiet, and when I restarted low pressure warning and reduced power came on in driveway, hum.... I thought code was still in computer, I disconnected battery and turned headlights on to try and kill the code, started it and now the engine light came on, nothing else, and truck ran fine....hum.... went to autozone, and they pulled the code, low fuel rail pressure, p0087, guy said to drive and code should go off, truck runs fine. Drove truck a couple days and engine light went off, Truck runs great.......All is good.
View 5 Replies
97 F150 4x4 around 200k miles on it, Drove the truck to town today and it started making a screeching noise when I turn the wheel and moving at slow speed's It is not the typical Ball joint squeak, and they were replaced about 6 months ago. I also get a clicking squeak going down the road, everyone in a while from take of ill get a slide grinding or crunching noise. Also noticed that when taking a curve to the right i feel and hear a slight Bump but I don't when turning to the left/
Also it doesn't have the typical grinding noise of a bad unit bearing, there is a slight roar but Pretty sure that it is just the aggressive tire's... I am about to go out and Jack it up and have a look at it to see what it was. Also if I loosen the Cv nut on at the Hub that would show me if there was any play in the bearing correct? since the cv should keep the bearing's fairly tight even if they are worn?
View 3 Replies
I was driving 90 km an hr. and my trailblazer went into neutral and started making a ticking noise and it wont go forward or backward...
View 2 Replies
2004 Santa Fe AC fan has started making a rattling noise. It gets louder when the fan is turned up. How can I check it? Noise seems to be under the glove box.
View 3 Replies
My car started making a weird like shhddddhshdshhhdddshhddd when I press on the gass. I am super paranoid bc last year they replaced the lower engine block bc of my oil mixing with the coolent. I need to replace my tires, could that be a factor? Iam a girl who knows nothing about cars.
View 1 Replies
Asking on behalf of the woman who picks up my kids from school and drops them off at after school care. She has 2005 explorer and says the brakes are making noise while she is rolling. noise stops when brake is applied. she thinks it is coming from the front. I said I would check it out. I've owned a few trucks but never messed with an explorer.
View 1 Replies
So I was driving my wife to dinner the other night, it was about 30* F out and the mirror started making a clicking noise (of course, I had no clue it was the mirror until I stopped and looked around). Sure enough, the mirror was clicking and the display was going back and forth between the "188" (the start-up display) and "NW" or "W" or whatever direction we were traveling in.
Obviously the clicking noise is a relay.
View 2 Replies
Recently my engine started making a rattling noise. It does not matter if the engine is warm or cold. In either condition it produces the same noise. The noise can be best heard at the back of the engine. My car is a Sonata 2.4 GLS from 2006 and has roughly 110000km on the odometer.
Hyundai Sonata Engine noise - YouTube
Tomorrow I'm dropping the car off to the dealer in hopes that they can find it.
View 11 Replies
