Ford - Focus :: 2001 ZX3 Randomly Stalling But No Check Engine Light
Jul 18, 2011
I have a 2001 Ford Focus ZX3 (2D Hatchback) that has been randomly stalling since we bought it. There is no engine light, the dealership couldn't get it to stall and just gave it back. Another garage got it to stall and thought it might be the "idle-oxygen sensor" (not sure if I'm remembering the name correctly), but that didn't stop it from stalling either.
My wife is ready to dump it, but even spending a couple thousand a year on repairs is less than the grand total of a year's payments on a new car, insurance, etc. But it would be nice to fix it.
View 8 Replies
Advertisement
Ford Focus Station Wagon 2006 - Seems to have electrical problem. Warning lights for check engine and ABS come on randomly. Also when car is parked and temperature is low, Clock time is lost and radio stations are lost. Is there some type of grounding issue?
View 5 Replies
My 2004 Focus passed its emissions test in Maryland in the late fall last year. Shortly thereafter, the check engine light came on. My mechanic put it on the computer and said it needed a new catalytic converter. It only had 86,000 miles on it. I watched and waited for a few months and had the fuel filter changed during a routine oil change. A couple of days after the fuel filter was replaced the check engine light went off and stayed off for 4 months, but it came back on a couple of days ago. I have been watching the mileage carefully and it has been steady at about 26 MPG for years.
View 5 Replies
2004 Ford Focus, 2 Liter Zetec engine.0. Situation: Car initially running well but want to improve mileage, so I installed premium plugs.1. Ran roughly on test run, so headed home. Check Engine light came on before fully warmed up.2. Found and corrected loose plug wire.3. Engine now purrs like a kitten, but Check Engine light stays on.
What should I do now?
View 8 Replies
Ok I just bought a used 2003 Ford Focus from a dealership which I am financing and after the second day driving the check engine light came on. Once I saw that I took it back to the dealer and he told me the sensor was very sensitive and because I didn't close the gas tank tightly the light came on. I didn't feel satisfied with this answer so I took the car for a diagnostic. They informed me that the car had a gasket leak. I then took the car back to the dealership and told them what I had been informed and the mechanic told me that it wasn't a big deal, nothing for me to worry about. Now I don't know much about cars and I have been doing a little research of my own and a gasket leak seems to be a big problem.
View 8 Replies
Just had my lexus dealership do the ELF recall. While it was in there I had them check to see why my check vsc light comes on randomly which sets off the check engine light.
They came back and told me that my water pump is leaking, what are the future problems of a leaking water pump?
They said the check vsc light is coming on, in their words is "found center y pipe, gaskets leaking at front pipe, may still need to replace converter pipe." So what does that mean and what do I need to do?
View 14 Replies
My daughter's automatic DOHC SE Focus had suddenly been stalling, becoming harder to start and not maintaining a steady idle. I took it to our semi-trusted repair shop and was told it needed an EGR valve, plugs, coil, and ignition wires. $580! These all seemed like repairs I could do and so I have worked through all of these. I replaced the EGR valve and that seemed to make the problem actually worse. (so I put the old one back in) I put in new plugs and that improved the idle a small amount. Then I put in the new coil and that seemed to steady the idle a bit more. But here is what I have discovered through my many test drives after making these incremental repairs: The car starts now from cold very well and runs great for the first 20 minutes or so but...when it gets hot after 15 minutes or so of 50 mph driving, the idle drops and the engine wants to cut off. At low revs it seems to stumble and lose power. I think this is what my daughter was experiencing originally and none of my early test drives were long enough to surface the original problem. I have read that the Idle Control Valve might be a culprit in this sort of behavior.
View 5 Replies
I purchased a 2001 Ford Focus 7/17 from a Ford dealer. While my daughter was driving, at a left turn, the engine light came on, the car stalled, and the steering wheel and gas pedal locked up. A friend did a computer scan and said the code came back that 2 sensors, the crank shaft and cam shaft sensors, needed replaced. So we had them replaced.
About 4 days later, while driving home from school, on a right turn, the car broke down again on my daughter. She said the symptoms were the same, engine light came on, car stalled, the steering wheel and gas pedal locked up. So we had it towed to a local Ford service department. They said the ignition coils needed replaced and the valve cover gasket would eventually need replaced (per the mechanic, this wasn't directly related to the issue but a small leakage was found). So we let the Ford mechanic replace the coils and the valve gasket cover. They ran several tests and put 20 additional miles on the car without failures or issues, scans came up clean.
So while driving to school this morning, on a u-turn, my daughter experienced the issue again....car stalled, engine light came on, steering wheel and gas pedal locked up. After sitting a few minutes, the car started up so she drove it home and hitched a ride from dad to get to school.
View 6 Replies
I have a a 2005 Focus, 199,000 miles. The battery light has been come on randomly. It doesn't seen to be related to any other event in the car. Things I've done to diagnose it...
I cleaned the battery cable connections before I started any diagnostics.
I have two code reader and no codes are being thrown.
I connected a multimeter to the battery while the car was idling in the driveway.
I got 13.8-14.1 volts as the car sat and ran. When the light came on no change on the meter.
I have a Scan Gauge that allows me to watch the voltage in real time. Four days and no change when the light came on. ~13.8-14.1 at idle and ~14.1-14.4 underway.
I have the Car Chip. I plugged it in drove for about 10 runs and the voltage trace was pretty flat on all runs, battery light on or off.
The only thing that is consistent is if the light is on and I rev the engine it goes out BUT they rpm when the light goes is inconsistent.
View 6 Replies
Ive got a '94 ranger with the 8 plugs and more often than not while driving and sometimes when it first starts, the cel comes on and immediately I notice a lil rough running and lack of power. Also my milage has dropped since this has started. Plugs, wires, o2 sensors, not to familiar with my gas saver. I love it cause I can just get in it and go. With twice the fuel milage as my bi truck!
View 14 Replies
I randomly started throwing a couple codes that have been causing my "check engine" light to come on ... came on on my way into work this morning) . I know that the P0683 code is the Glow Plug Ctrl Module to PCM Comm Circuit (from my code reader), but I am not sure what to do next ... I have the dealer service DVD from 2002 that I will look at this weekend....
View 7 Replies
So my wife was driving our '10 escape xlt and the engine light came on and it displayed the 'check engine' message on the screen. It has 86500 miles and luckily no problems yet. The only thing that has changed was she accidentally put super premium gas in it the other day. The light came on and after she drove it home (about 10-12 miles) and it sat for a few hours and i drove it about 20 miles it randomly went off while it was idling.
I shut it off and let it sit for 20 minutes and then let it idle for a few and it never came back. It has been running ok. We definitely drive it a lot as she works day shift and i work nights. I'm just trying to make sure there's nothing wrong with it. I got a bulletin a while back about the intake getting moisture in it. I didn't know if maybe this could be the beginning of this or something else. This is a whole new territory for me as i consider my 91 f250 'new'
View 6 Replies
2000 Ranger 2wd 3.0 ... I bought my truck last summer for $1k from my neighbor, it has hit a deer so the grill is busted,front drivers fender bent up and bumper is bent all to heck. The old girl is rock solid reliable though and gets decent mileage with cruise heat and ac so I'm happy.
Anyways on to the point, I am having two big issues with it, the check engine light randomly comes on and causes it lose power sometimes at others you don't notice it. I have not been able to get codes read because it goes off every single time I go to someplace with a scanner. The light will usually go off if you floor it for a long stretch maf maybe?
The other issue is the transmission, I don't know for sure which tranny it is but the overdrive button does not work at all even though the fuses are good and when I drive down the highway second gear you have to let off for it to shift sometimes ( I've been leaning towards the valve body gasket for that) and lately it has started a horrible vibration kicking out of overdrive or just downshifting on hills etc.?
I forgot to mention it has 255k miles on it and I don't know the history besides the balljoint I replaced this week and radiator when I bought it.
View 3 Replies
Anyways, My 2001 Windstar has been acting up recently mainly the headlights flickering every now and then, car randomly stalling out on me - after it dies, I pull over and start it up right away and the ABS light came on.
Check engine light is on (presumably due to the car stalling out) but I do not seem to be able to read the codes, the code reader is working fine on my 2001 Expedition but on the Windstar it just sites there at 'connecting to vehicle'. I've tried disconnecting the battery for 10-15 mins and this made no difference, I also checked the fuse for the port was good so now I'm not sure what to check next.
View 3 Replies
I recently purchased a rebuilt 2014 Ford Focus ST3 with about 11,000 miles on it. The engine is a turbocharged 2.0L EcoBoost. I usually use 91 or 93 octane fuel, whichever is the highest available. - 6 speed manual and around 285 horsepower (with tune) is a lot of fun to drive. When I bought it, I had the mechanic that was rebuilding it put an Injen cold air intake on it. A few weeks after I got the car, I took the it to a local performance shop to get it tuned. The tune works great and added a bit of power to the car, but now I have a strange issue.
About 1 time out of 75 when I take off, the car throttle is limited and displays the message "Engine fault - service engine now". On one occasion the engine even stalled on me while crossing a highway. Note that this happens while shifting into and releasing the clutch ONLY on first or second gear. In order to get my car running properly again, I need to come to a complete stop and turn off the engine and then restart it. Sometimes the check engine light stays on, but it usually goes away after I restart. The only engine code that is shown is P106B, which has something to do with an incorrect reading on MAF sensor causing the throttle body to close.
Research online told me this issue is commonly caused by a damaged/improperly sealed intake filter or a crack in the intake itself, which changes the angle that air hits the MAF sensor. I have checked both of these and they are good. I have ruled out a bad throttle body control because if that is bad it usually throws another code indicating that it is faulty.
The only thing that I can think of, and I may be wrong, is that when the performance shop tuned my car they tuned it for a stock intake. This would mean that the car does not think it should be getting the airflow that it is and throttles it down to compensate.
I am not sure what to do at this point because (A) the issue impossible to replicate and seems to happen at random, and (B) I cannot just take it to the performance shop and tell them to fix it because I am not sure what is wrong in the first place.
View 3 Replies
So I have a check engine light on and it goes off and on randomly and when I checked with a scanner at like pepboys it shows code P0420 which is the catalytic converter . [URL]....................
View 3 Replies
my 2000 focus se, 2.0L SPI, with 82k began to recently run rough at idle then progressed to stalling at longer lengths of idle. The condition starts once the engine warms after 2-5 minutes. I 1st tried gas treatment. I replaced the ignition coil as suggested in the other threads, but it has not improved the problem. I had the fuel pump recall-replaced 2 years ago. I would guess that a bad fuel pump would exhibit loss of power at all engine speeds? Before I proceed to replace plug wires and plugs.
View 14 Replies
I own a 2000 Ford F-250 5.4 Automatic. It tows my 5th wheel trailer very good. On our last trip it suddenly experienced the "check engine light" effect.
The light turns on randomly and either goes of after a couple of seconds or it doesn't go on when I restart the engine.It is mainly annoying, but when in towing it really hurts, because the engine switches into an emergency mode and stalls.
I read that the engine uses only 4 cylinders. I read many articles on the web about that light, but I couldn't find a solution. The thing is I brought the car to several repair shops but none read a code from the computer.
I think it's not a real fault but a misreading or maybe a cable that's grounding? The problem is, I can't bring the car to a repair shop, because there is nothing wrong with the car. How can I find the source of the problem?
View 14 Replies
I have a 2002 f350 5.4l that has stalling issues, first some back round. Last week I pulled up the a stop light and the truck stalled I figured it was a iced fuel line as it was very cold so I put a bottle of drygas in the tank. Evidently there was a lot of moister in there because as soon as I started the truck check engine light came on and truck would not idle at all. I got through that tank and am now on my second tank. It is better but the truck will still stall when stopped at light (has never stalled in park or on the road only while stopped in drive) the check engine also light went off halfway through the first tank. What next?
View 9 Replies
I have an interesting issue that happened today after filling up on the way home from work. I have a 2011 Accent; 5 speed manual with 3900 miles. I filled up my tank and then topped off a little extra (which I now know is a no no) after the pump shut off. I put the cap back on, and after getting a cup of coffee, cranked her up and started on my way home. I drove maybe 20 feet and after coming to a stop, the car stalled. I wasn't sure at this point if maybe I let off the clutch a little too much. I started right back up and drove another 20 feet to a stop sign, and she stalled out on me again.
This time, after starting right back up, I noticed the check engine light was on, and if the car idled, it stalled. This is where it gets a little interesting. I was maybe 5 miles from the dealership where I bought my car. So I made a quick trip to the dealership to see if they could get the codes to determine the problem. After parking at the dealership, I turned off the car, removed the key from the ignition for about 10 seconds, and then started up again for giggles. The check engine light is now gone, and the car doesn't stall when idle. I have an appointment to get my oil changed, and am wondering if the codes can still be pulled?
View 4 Replies
First, my g/f and I love her 2.0T, but lately a few things have started to bother us.
1. Strange, rhythmic squeeling at low speeds (like a bearing or warped rotors) that goes away when the brakes are applied.
2. Driver's seat is rocking back and forth under heavy acceleration and braking. I hope it's just a loose bolt and not a crack in the floorpan.
3. Check engine light randomly comes on for a day or two then goes off conveniently after we schedule an appointment with the service department.
What might be causing these issues?
View 3 Replies
