It's a 2003 Ford F-150. When I'm driving slow I hear what sounds like a tin can clanking up against another piece of metal, coming from the rear end. Right, Left, or center I'm not sure. U-joint maybe?
There is also a bit of wobbling when I'm braking at a high rate of speed.
I have 2008 VR6 4 motion wagon with about 98K miles. It has been relatively trouble free and I love the car. To try and make it last I am trying to stay on top of maintenance. I had a VW warranty until 72K and got several things fixed along the way. But, I had asked about the one weird thing it does well before it went out of warranty to no avail ("no trouble found").
The weird thing is that sometimes it sort of stutters when I slow down from a high rate of speed quickly, like exiting a freeway. I described it to my new mechanic (no longer beholden to the dealership mechanics) when I was speculating a new transmission might be in order at some point and he said it was probably an issue with the program that tells the transmission when to downshift and to ask about a software update. I did; none available.
Is it firmware related, how to get it fixed?
I used my truck in 4x to pull a couple of little stumps. Nothing major, just put it in 4l more or less to keep from tearing up the yard. Noticed a couple of weird things today. For a minute had a good pull to the right. Just felt "weIrd" in front end. For lack of a better explanation. Jacked up and checked for play, nothing unusual. Took off the tire and checked other stuff and couldn't find anything. Lubed up joints etc and drove later. I'm hearing a slight " clanking" noise in front. I know it's got something to do with the 4wd but I don't know where to start.
View 3 RepliesMy Prius c has always made a high speed whirling noise when braking but now at speeds of 42 to 46 MPH this high speed whirling noise is there and when you are just coasting have a noisy transmission or is this something I should be getting to the dealer with.
EVCT transmission noise ....
With 8 speed tranny has the clanking/clunking noise when shifting to P? When I park my car and shift from R to P there is a clanking/clunking noise and I feel small vibration on shifter itself when the noise occurs. It happens all the time and the noise loud enough. Is that normal? Up to this moment I thought it is normal (it still very well maybe) until I drove my friends Audi that does not have any noises when playing with the shifter. My Audi did not have that either.
View 2 RepliesThe car runs fine clutch has pressure and everything. I can idle with the clutch pressed down and put into reverse and every gear BUT if I put it in a gear and start to let the clutch out I can hear a clanking or something flying around in there and it doesn't really want to go anywhere and I don't want to really let the clutch all the way out in gear or let it out for too long and screw anything else up worse..
View 2 RepliesMy car is an 08' camry LE v6. I bought it with 45,000 miles on it and I've had this issue since I got it, put 10k miles on it with no change. When I am going 55mph+ or going downhill the car vibrates when I brake, the steering wheel shakes pretty violently. It doesn't seem to affect the stopping power and it's perfectly smooth at low speeds. I don't think it's a wheel balance/alignment issue because it's only when braking, even at 80mph this car is the smoothest ride I've ever had.
View 7 Replies2010 RX 350 NAP ... Brand New and OEM where it would apply : Tires (Conti's LX20s)
Brakes / Rotors (had same shake before replacing and did not improve after replacement but maybe I am dealing with a bad caliper here)
Tie Rod Ends
Stab Links
Lower Control Arm Ball Joint
None of which have solved a vibration issue thus far. Strut feels solid and the corner push test had the car settle out in less than 2 bounces.
If car has sat a while the driver front (where the issue lies) feels like a imbalanced tire/bent rim (rotated the wheels just to be sure it didn't follow the wheel/tire) or like a broken belt. The tires are almost brand new and only put them on because I was trying to eliminate the point of issue.
When braking, a light touch to the brake pedal makes a almost light clank sound (like weight shift is causing the clank or perhaps a sign of a bad caliper (although pad wear looks even but didn't have rotors rechecked but even with brand new rotors it was there so I don't feel it's a warped rotor plus the vibration is there even when not applying the brakes.
There is only one control arm and the bushing didn't look cracked beyond the normal surface cracking I have seen on most rubber bushing. The upper support is from the strut so perhaps a bad strut or maybe strut support/cap/bearing?
At a total loss as the local garages cannot find anything wrong. My thought was a bad wheel bearing, although there is not any grinding sound that you typically hear when a hub is going bad.
Could also be the CV Joint but not sure how to tell if that really issue the issue unless I replace all the other parts first (hub, caliper, strut/support/bearing).
I have an 05 Camry LE & when ever I'm on the highway going around 50-80mph & need to break my steering wheel starts to shake until I either stop or put my foot back on the gas. Last year my power steering rack & one of my motor mounts got replaced, & for awhile it stopped & figured because that was going out that's what was causing it.
Well about a month later it started back up & still does it, I've taken it to the dealership & have told them & they test drove it, felt the same thing I felt but didn't find anything. Is there anything else that could be causing it ? Earlier last year my bearings were lose in the front, and I managed to get my brakes stuck & had that all fixed & since then that's when it started shaking . I took it back to that shop & mention every time I go in for oil changes at my dealership, is there something else I'm not aware about that I should ask them to look at ?
2005 Chrysler Pacifica TouringWhen pressing on the brakes at speeds over 25 the steering wheel wobbles. I have had this problem in the past and it has been diagnosed as warped discs. They have been turned and it fixes it for a while then it comes back and again warped discs. I have had the discs replaced but it has come back time after time.
Just had it checked out and they are saying it again, warped discs and this time cannot be turned need to be replaced but they also showed me I need new lower arms.
What do the lower arms do? And if I do not replace them will I have the same problem later with the front discs getting warped?
If the front rotors are warped would I not feel it when braking anytime and not just braking hard at high speed?
View 2 RepliesI'd like to understand the rate of braking that results in the maximum recovery of energy into the battery. I try to brake so that the needle goes down almost to the bottom of the 'charge' region, but not so strongly that the needle completely bottoms out. I figure that if the needle bottoms out completely, I am using the friction brakes. Is that the correct way to use the brakes? What technique to achieve 40mpg use?
View 14 RepliesLately my 2007 GX470's steering wheel has a shaking/vibrating problem whenever I apply the brake at speed above 50 mph or so. Without braking or with braking at slower speed, there is no problem at all -- everything is glass smooth.
1. I assume the front brake rotor is warped?
2. Will I need to change the rotor or is there a way to fix the warp (it that's the problem) without changing the rotor?
3. Approximate part & labor cost?
I plan to bring to dealer for a check up but would like to know ahead of time what to expect.
I got an 04 GLI ... When I'm driving at about 60 mph, and I apply the brakes lightly, i get a vibration in the steering wheel. it doesn't happen under heavy breaking, just when i press the pedal down lightly to slow down, and there is NO pulsation in the pedal at all during any time.
Some history of the car:
Just did pads and rotors 2 weeks ago,
car has spacers, hub centring.. the problem occurs with out the spacers also.
had an alignment a month ago.
had tires balanced 2 months ago
tires are 2 months old.
I own an 08 Rx350 at 70k miles now. This is my first car ever; my parents bought it brand new and gave to me as gift after I graduated from college. I try to take good care of it; whatever the dealership tells me to replace, I replace it. I follow the maintenance schedule and owners guide to a T. I never really paid attention when my parents drove this car...but I don't know why my car vibrates when I get maybe above 60 mph and try to apply the brake. I do not brake hard and now I pretty much avoid applying brake and just let it glide. Is this normal? Whenever I visit the dealership they do a complete check up. All the check up results are normal;nothing wrong with tire trims, brake pads, suspension etc.
View 9 RepliesI've been noticing my steering wheel shakes if i normally brake going on the highway at high speed. My friend said that it's probably your brakes and rotors. Get them replaced and resurface and that should fix the problem. Can i get some confirmation before i do this?
1. I just had my tires replace at 55k and bought this car new back in feb 09. it has 62k.
2. also i've been reading up on camries fail water pump. i'm thinking of doing this over the weekend or should i just wait until i notice some leaks?
3. lastly, any major thing i need to be aware of. i've done the normal engine oil and filter change, cabin and engine air filter change, that's about it. i hope these camries are bullet proof like the old school (92-95).
2002 Ford Focus SE Mileage: 140000
Symptoms: When turning right, especially at low speed while braking, it makes this rapid clicking noise, disappears once you let go of the brake.
In the past when it made this kind of noise, usually goes away after I made sure the brake pads clips are securely clipped around the caliper, but it's not working this time. No noise while braking going forward or turning left. Seems to be worse at lower speed and any right turn can bring on the noise, does not have to be a full-lock turn.
So far what I've done: Made sure the brake pads clips are secured (horribly designed), lug nuts are torqued at correct spec, no obvious broken linkage, bar, arm, coil, or CV boots under quick inspection.
2015 Hyundai Sonata limited Kumho Tire Wobbling at Slow Speed 10-20 MPH
Bought a brand new 2015 Hyundai Sonata limited from Hyundai of Kirkland, Kirkland WA on Aug 30th, 2015 and started noticing wobbling issue.
Checked Wheel balancing/alignment and have visited Hyundai service center 5 times so far and they give me the standard answer, you car drives as expected.
2011 SE leased in December 2010. I Now have 14,000 miles and my trans has started to slip.
First slip was yesterday on a a fully warmed motor while I was accelerating at a normal rate of speed. I am guessing the car was in 2nd gear (25mph) and the rpms shot all the way up to redline. I let off the gas, coasted for a few seconds and the trans engaged the gear and I kept driving. No cel
Today the same thing happened under the same conditions but this time when the trans re-engaged the gear, the car jerked forward pretty violently.
About 15 minutes later this happened again but at highway speeds (65mph) while cruising. Again, violent jerk and a thump when the trans caught the gear.
After all this I have no CEL. I know if I bring the truck to the dealer they are going to give me the old, "we cant reproduce the problem." Once the trans starts to slip like this the damage has already been done and its just a matter of time before I am stranded on the the side of the road.
The noise is somewhere between a tin rattle and a bearing grinding heard most when braking but constant under say 10 mph. We have not been able to pinpoint where exactly it is coming from but I believe it is front drivers side.(but really could be anywhere) it is not dependent on rpm, nor gear or clutch engagement, Nor hubs engaged or disengaged.
The drives side front hub, rear hubs' bearings(races and seals) have been replaced. I have the passenger side front hub to do as well, just haven't gotten to it yet and it doesn't seem bad. we are all stumped on what it is. It seems to relate to the rotating assembly though as it seems to change with speed. it almost seems like tire rub, but there is no scaring or marks of any sort anywhere for it.
Vehicle is a e99 f250 short bed ext cab. open diff if it makes any difference. My next thought after the hub is pinion bearing? Could it be something to do with abs? say the truck is 4 wheel abs but the fronts are disconnected (trying to figure out if it is 4wabs as it appears to have connectors, but the original hubs did not have the hole for the sensors. no abs light comes on, but that could be a bad bulb too)
What we have found is hubs locked or unlocked, 4wd engaged or disengaged, and happens at right around 16 mph, braking, accelerating, clutch in or out, in gear or in neutral. All 4 corners have new bearings. We have found 2 things, 1 is the track bar bushings are shot (don't think this is the source of the noise but could be wrong and i will be replacing those..once I have money in again.. 2 the passenger side leaf spring when wacked with your hand makes a different sound than the drivers side.( could be a matter of different loads, but figured worth noting)
There are 2 noises, the first is the noise we hear, the second is one that i found when doing the noise reduction (loud meaty tires you cant hear the noise in the audio without reduction) I think that that was one of the hubs, or maybe the brakes, I am unsure, but it happens at different locations in the video.
Audio : [URL] ....
Bought my Prius (2005, with 160K miles) about a month ago and since I've had it I am hearing a metal on metal grinding noise when braking at low speed. How loud the sound is depends on how hard I am on pushing on the brakes. One of my co-workers has the same model and said that his does not make that sound. Not sure if its just because it has after-market brake pads or something? This noise only occurs when braking at low speeds (below 10 MPH) so I assume its an issue with the front brakes.
Is this something I need to get looked at by the dealership? I had a local mechanic that worked on my old Honda beater take a look and he said that the rotors and brake pads looked new and wasn't sure why they'd make noise.