I am having trouble finding the correct part number for the Ford emblem that goes on the front grill on an 09 F150 lariat crew cab. My father in law asked me to order one since his is faded badly. What is the correct part number?
View 1 RepliesHow can i mount a F emblem i bought for my Grill?
View 8 RepliesJust like our fleet of 06' F-150's, my emblem on my 2011 F250 is starting to peel and bubble up on the front grill. Every 06' had their rear and front emblems replaced close to 3 times until we just gave up and lived with it. I thought Ford fixed this problem? Going to the dealer tomorrow to get a warranty repair.
View 14 RepliesI'm trying to locate the part number (and a replacement) for the plastic piece that covers the top of the tailgate (when its shut) next to the step. It's about a 12 to 16 inch long piece of plastic which has some broken tabs on it, so everytime I drop the tailgate, it either flies out or starts to... I checked the fische online and I don't even see it in the picture. I did find some one-piece parts called "tailgate spoiler cap" but I didn't find any to fit a 2014 F-250 with the step on the tailgate. Should I just tell the wife to go hot-glue it ?
View 1 RepliesCan't seem to find a number for just the bearing and snap ring. All I can find are the dang assemblies.
View 11 RepliesWhat is the part number to the TPMS sensors for a 2011 Corolla S. Or any stock toyota ones that will work?
View 2 RepliesI just bought this grill [URL].... and it fits great. However, the grill does not come with a emblem so I was just going to put mine from my 06 Passat on but it is a lot smaller than the opening on the new one. Am I just missing something here, or are there different size grill emblems on some cars? Or is my new grill just messed up?
View 3 RepliesI took apart my front bumper for my 2012 Camry SE a while back and swapped it when I hit a cone on the freeway.
I accidentally lost one of those metal nuts that goes underneath the bumper - its like a hexagon if I remember correctly. - I had to use a torque wrench to open them and there was like 8 or 10 total.
I'm finding that the rear door lock actuator for the first gen is quite easy to find, but I'm unable to find a part for the front which I'm in need of.
Looking for the part number available for the Front Door Lock Actuatorof a 2004 Santa Fe.
My Ecoboost emblems on the sides are starting to discolor for some strange reason. I keep my truck clean and waxed so I don't feel it's due to neglect. I would like to ask the dealer to replace them with new ones but am concerned about how they would remove them...don't want any damage to the paint etc. Can this would be "easy" for the dealer to do without causing issues?
View 14 RepliesMy 2012 F150 has these rubber sheets between the grill and radiator. In the attached photo you can see them between the headlight and radiator.
One of 4 sheets inside the engine compartment. See the sheets just inside the headlights.
They appear to be there to direct air from the grill through the radiator. These sheets have already decayed/torn and need to be replaced.
I have added the upfitter switches to my FX4 but used all of the switches for accessories. Need to start using the round buttons but don't know the plug number/pigtail for round buttons.
What the plug number/pigtail is for the "off road/hill decent" round buttons on the raptor upfitter console? I don't want to spend money for the harness when I only need one connector. The tiny pins on the switch are too small.
I need to remove the interior part right above the glove box and replace it because the paint is peeling. If I can get a diagram and where I can order it online would be awesome,if that's possible. Never had this problem before on any ford truck with the interior paint and all I ever do is wipe it down with armor all.
View 6 RepliesI am looking to install a new Message Center in my 2003 Excursion XLT. I have checked the vehicle for wiring and everything seems to be in the right places. I have ordered the Ambient Temp Sensor and that will just plug into the harness that is on my vehicle with a factory cap in place at the moment. However when I tried to order the message center, the dealer said it would be best to get the part number off one that is currently in a vehicle.
View 13 RepliesWhile fixing some trans leaks on my 6.8. I was tightening a clamp on the center cooler and the lines must have rotted. It snapped off. I was having problems with both attachment points. So guess it's just time. Problem is I cant find a good part number to order one. I can't find it on Rock auto. Here is a picture if it. It's between the front and main radiator.
View 10 RepliesLooking to confirm the part number. My ICP is mounted on the RH valve cover and has a yellowish upper where the three pronged connector inserts.
View 10 RepliesWhen I bought my truck one side of my truck had plastic between the outer sheet metal and inner sheet metal and the other side was missing. It looks like the purpose is to keep mud and road gunk from shooting up into the rear area. Where I can order replacements and what they are called? I need both sides, since the one I did have was cracked and barely hanging on.
View 8 RepliesHad a question about where the battery fuse is located and it's number. I just put a brand new alternator on.my truck. Turns out I might not have needed one, switched the battery with the new alternator on and the truck still went dead after it ran for about 10-12 seconds. So some told me it may be the battery fuse but I don't know which fuse it could be.
View 2 RepliesI am swapping to a 6.0 trans cooler in my 7.3 and want to add the external filter as well. I looked through the tech folder and the link about the external filter doesn't seem to be working. I am just looking for part numbers of what everyone is using. Is the Magnafine as good as a spin on style filter?
View 11 RepliesI found 2 Ford OEM part numbers for what seems to be the same identical metal CAC Tube for the drivers side.
6C3Z-6C640-AA
and
6C3Z-6C646-BA
I wanted to place an order today for my '06 but want to make sure it's the right one. What is going on here? (maybe one is for a '03-04) I Don't know...
What are the part numbers for the REAR Sway Bar Bushing Clamp to fit a 2004 F350 Dually w/ the dana 80 axle? This is the part that surrounds holds the bushing that encompasses the sway bar holding it to the axle itself.
Found out couple weeks ago that the front and rear bushings were different heights. Meaning the ones for the front sway bar bushings were taller and the ones in the back were shorter. I can find the part numbers for the front ones pretty easily but the rear ones is like searching for the holy grail. And yes I need the shorter rear ones.