Ford F-150 (2009-2014) :: Engine Making Noise After Dealer Oil Change
Jan 24, 2015
I have a 2013 F150 FX2 5.0 motor that hit 16,000 miles. I took it yesterday to dealer for oil change. After 1 hour they advised me it was ready and that it was sitting outside. When I start the truck with my door open I notice a slight metal on metal sound coming from the driver side wheel well. Its not a constant taping sound. It more like its morse code. I called the service adviser. They take the truck, They came back 30 mins later and said. They hear the sound. Sounds like it coming from the bottom of the motor by the oil pain. They confirm its coming from the motor. I had 2 options.. Leave truck and let them dig into it or come back on Monday and drop the truck off. I left with the truck but will be returning on Monday. I spoke to a buddy mechanic and he said something is wrong and he believes they ran my truck without oil. He said maybe the tech started the truck and then realized he forgot the oil..
2013 F-150 5.0 engine noise - YouTube ....
View 14 Replies
Advertisement
2010 F150 XLT 4.6V .... Not too long ago my truck started making this whining/roaring noise when I accelerate. It does not matter what speed I am going from the slowest to the fastest it makes this noise but it does not make it when it is idle or at least it is not loud to the point where I can hear it while inside my truck. I am not sure what this can be I am at about 51,000 miles and have no problems other than the noise besides the fact that to me it seems as if it pulls at times when I drive it but others say they don't feel it pull. So I am not sure what is going on and I do not want to take it to any mechanic I'd rather fix it myself and know what is going on with my vehicle?
View 5 Replies
I have a 2012 3.5 eco boost. It has 82,000 miles. I just purchased a large travel trailer. That is the first thing I have ever towed. When I was accelerating onto the interstate the engine started making a chirping noise.( not the normal turbo whistle). It went away when the rpms came down, and now every time I accelerate, it makes the same noise around 2000-2500 under load.
View 6 Replies
There is a grinding noise when i make a turn,when i straighten out it's fine,when i bought the truck in 09 i had a shudder problem but that was repaired by greasing the spline in the drive shaft. Truck has 59,000 and is coming up on the 60,000....
View 1 Replies
Front wheel bearings making noise. Can I buy replacement bearings/races/seals, or must i buy a whole new hub front assembly?
View 3 Replies
I got some issues with my f150 2009 supercab... 6,5 box 5.4 6speed 160k on it...
For the past 30 k my truck vibrates between 20/30 kmh when accelerating mostly when making a right turn and when engine is warm, feels just like driving with 4x4 and doing a u-turn....
I'll get the transmission flushed but didn't work (does shift smoother though). They said the u-joints were still good ,no play. I don't hear any strange noise either
In the last while i read a lot about trouble with the pinion angle/driveshaft/slip yoke and what all on the newer f150
Can I grease the slip yoke myself easily or? Is there a complete aftermarket driveshaft available that solves the problem permanently instead of temporary or would it be the transfercase? Cause i didn't buy this truck new so not sure if the transfer case oil ever got changed,or does it not need to be changed ever?
View 14 Replies
My wife purchased a new F150 4x4 in late 09. We have driven it about 5000 miles. It is garaged year around. Her brother offered to do the first oil change but can't get the filter off. He has tried every type of wrench and has the metal body of the filter nearly completely torn off up to the rim of the filter near the seat and it still won't screw off. we are thinking that is might have gotten cross threaded at the factory and over tightened.
View 8 Replies
Opinions ranged from using the Ford on board system, which can let you go
10,000 miles, to "Ma pappy done said ya gotta git that ol' all outta thar every 3000 miles." Needless to say, we didn't reach a consensus.
So here's a different question:
3 owners, Art, Bob, and Charlie each believe in 5000 miles between changes.
Art drives 10,000 miles a year and changes it twice a year. No problem. Right?
Bob drives 5000 miles a year and changes it once a year.
Charlie is gone from home most of the time and only drives his vehicle to the airport, then back a couple weeks later. He does this once a month and it's 100 miles each way. Otherwise the vehicle sits.
So he drives 5000 miles in 2 years. Any problems there?
View 14 Replies
When should I get the first oil change in our 2013 F150 5.0? We took a 1,000 mile trip right after getting the truck. It's been two weeks and I have put around 1,600 miles on the truck.
Also, how often is everyone getting regular oil changes with the 5.0?
View 14 Replies
Took my truck in Friday for my first oil change at the dealer and they put Pennzoil in instead of Motorcraft. One would expect Ford would require their products in their sponsored dealerships. i didn't realize until I was home and placed a phone call to the service manager and have not got a return call.
View 14 Replies
I am on top of my oil changes, but this is the first time I have seen the center display flash "change oil soon" and stay on until you hit the OK button. I went through the manual and I cannot find where there is a provision to clear the message. The oil was just changed, has maybe 600 miles on it.
2011 F150 EB lariat with 10,000 on it....
View 9 Replies
I recently posted a thread about my 2011 5.0L F-150 making a knocking sound that I was unsure about. Here's a link to that thread. [URL] ....
But my question here is about oil. My truck is still making that damned noise, it seems more audible sometimes and less so others. But it ONLY happens when the engine gets warmer. The noise is completely absent when I do a cold start in the mornings. I've been trying to figure out if it always made that noise or not...I do remember a few years ago when the truck was brand new, pulling up at a drive through window for coffee and noticing that there seemed to be an excessive amount of engine noise echoing off the brick building. But other than that it never sounded out of place to me.
I only started noticing this knock after my most recent oil change, which for the first time ever in this truck, I went from using the Standard issue Motocraft 50/50 synthetic blend oil to using Mobile full synthetic.
Now, I could be totally off base with this...But is it possible that my trucks engine is making more noise due to the thinner synthetic oil? I am considering going back to the MC 50/50 blend oil to see if it makes a difference. Also it's worth noting that this knock really only seems to be present below 1000RPMS. When I'm actually driving and pulling between 1500 and 3000 RPMS the engine itself sounds and feels as smooth as butter. On that note, it idles perfectly smooth as well...It's just the noise below 1K RPMS.
View 14 Replies
I don't have my owners manual handy for my 2010 F-150 and was wondering how to reset the "change oil soon" message that appears everytime I start the truck.
View 7 Replies
I have the normally aspirated 3.7 V6. The ownersd manual talks about the trucks computer telling you when the oil changes are needed.....But, at 6500 miles, bnothing has come through. I have not changed the oil yet on it. I feel this is a huge sin, but am not sure.....I was raised you changed the oil every 2-3 grand. But the owners manual on this truck says the computer will tell you when to. Should I just go ahead and change it?
View 7 Replies
2012 F150 STX 2wd 6spd 100kmi
I just dropped the transmission oil pan and changed the filter. Put a new filter in. 5qt of oil came out, I put 5qt of oil back in. Oil level is right between the A and B hash marks.
I start up the truck and put it in gear and nothing happens. Its like the oil filter dropped and it isnt getting oil. I dont think this is possible because i watched it go in, the oil pan holds it, the seal came out with the old filter and the seal went in with the new one.
Am I missing something here? this oil change went just as well as any other tranny oil change i have done but the thing wont move.
View 12 Replies
I have a 2012 F150 XL. I don't have a message center, just a 2 line LED readout, and there is nothing in the owner's manual about resetting the "oil change required" message.
View 3 Replies
2014 F150 3.5 Ecoboost...
I recently got my oil changed at the dealership and yesterday when I did my periodic oil check, I noticed that the oil level is slightly higher than the "high" mark on the dipstick. Its about 4mm above the high line, maybe 5mm at most. I do not smell gas in the oil, and given that its been about a month since the change, I simply think that slightly too much oil was added.
My question is will a slight overfill like that affect this engine? I'm particularly worried about "frothing" of the oil by the crankshaft. I don't think that oil level is nowhere near to be "pushed" by pistons and affect my seals. Correct me if I'm wrong here. I drive on very flat terrain. So the question to those that have knowledge on how much clearance there is between the crankshaft and oil level in that engine is, do I leave as is or go back to the dealer to adjust. (Reason I ask is because I'm particularly busy with a project at work, and if I don't have to burn time to correct this I would rather not given my busy schedule.)
View 1 Replies
I wanted to change oil at 1000 miles on my new 2010 FX4. The dealer said that I should wait till 2500 miles or so because it still has the break in oil in it.
Does he know what he is talking about or should I change it? He did say he would change it and take my money if I really wanted to.
Maybe my thinking is still old school about changing the oil right away with a new engine.
View 14 Replies
Very loud sounds like bottom end/rod bearing and is about to go out with a bang real quick!
Truck is a 2009 5.4 3V ...
Will the motor from a 2005 5.4 3V work to replace it? As I have one of those sitting in a old work truck. I know the intake etc is different but using the 09 stuff will it work and be a easy enough install or do I need a 09-10 motor?
View 7 Replies
I have a 2013 5.0 and every time I change the oil filter the oil runs out the front and back of the cross member. That welded on oil catch plate doesn't work. The suspension is stock and I'm wondering if I lift the rear of the truck with a floor jack will it get the oil from the filter all run out the front of that catch plate?
View 9 Replies
Changing the front diff fluid on truck. I was looking at mine today and it looks like the top bolts will be difficult to reach.
I also tried to suck the fluid out of the fill hole but couldn't really fit a tube into the differential.
View 7 Replies
