Who has installed 3" blocks in the rear. I've been working out of town for a few months and have scraped up a little extra money. With that said, I would like to add a leveling kit and rear blocks to my truck when I get home. I'm aware that adding blocks will increase axle wrap when accelerating hard, but I rarely tow and really don't beat on my truck that often.
View 14 RepliesI have a 2014 F350 (specs in my signature) and I want to change the 4" rear blocks out for F250 2" blocks to lower the rear of the truck.
Looks like a fairly straight forward replacement but I have a few questions.
Will the shocks need to be replaced? I do eventuality want to replace them as the stock ones are not that great but I only have 2500 miles on them.
When I do order new shocks for my truck after the changing the blocks do I order shocks for a F250?
I would like to go OEM parts for this but I am having trouble finding the blocks and u-bolts that I need. What are the part numbers for these?
Anything else I should know about to do this swap?
Noticed a chip on one of my wheels today and would like to get some touch up paint. What is the paint code or the closest color touch up paint for the grey painted 20 inch wheels?
View 2 RepliesI have driven two Lexus IS 250's with the standard 17" wheels. I am considering trading up to the 2014 model, which appears to often come with 18" wheels on the AWD model (which is what I am looking for).
What differences can I expect on the 18" wheels vs. what the 17" gives now?
I pulled out my Pioneer stereo from my 2004 before trading it in for the new 2012. From all my research and all, it should hook right up but I cannot get a switchable power supply at the harness. I can find one in the harness for the heater but do not want to cut into that one. What have you other Truckers done? Here is the wire harness I am working with. The Red is supposed to go the switchable power, yellow to constant and black to ground. The red from the stereo to the harness wire will NOT power the unit. I can get the stereo working if I put the red wire to the constant (yellow) but then the stereo will not turn off.
View 9 RepliesI have a question/clarification about factory-installed alarms. My window sticker indicates a perimeter alarm and securilock pass anti-theft. Additionally, the dealer wanted me to pay for an additional alarm. (I think), which I told him to include in the deal. The question is, what do these alarms specifically do?
View 8 RepliesI am new to the F150 section. I come from the 7.3L Powerstroke area of the form, but am happy to have my new F150. Back in the day I made lots of F250 and 7.3L how to videos. I hope to do lots of videos on the F150 as well.
My first task was to add OEM Remote Start. I can't take credit for any of the information I've used in the video, I just assembled it onto YouTube! Trying to add OEM remote start.
YouTube...
I have a 2011 F-150 with a 5.0 V8 and am in need of a block heater. Who makes an aftermarket heater that can be installed in this truck. I expect to see lows as low as -50.
View 4 RepliesI just installed a wet of weather tech (in channel) window rain deflectors/guards. the rear window deflector came with adhesive strips but not the fronts. Installation instructions say to leave windows up for 48 hours... My question about them is what is actually keeping the front deflectors in and seated? I've used the seating tool but dont understand how they can stay in the channel locked in when there's clearance on them.
View 6 RepliesInstalled the Rough Country winch mount yesterday. One hour, by myself. Used a floor jack to lift it in place.
Only problem was removing the plastic molding which came in the spot the fairlead will be. Just a small rectangular plastic molding with a couple of bars down the middle for looks. It had two screws on top edge, and two pushpins on bottom , but also was molded with two catches on each side on the back I did not see. When I figured it out, and squeezed with just my fingers, little too hard and snapped one catch on each side. They slide into a slot and catch but wont be doing that ever again. Oh well.
As for mount, solid and easy to install. I used hand tools as the air gun would only hit one of the bolts for the front tow hooks. The other was blocked by plastic molding. No big deal.
Hidden Winch Mounting Plate for 09-14 Ford F-150 Pickup [1010] | Rough Country Suspension Systems.
I'm going to be installing a 4" lift on my truck and was wondering what the pros and cons are using springs or blocks. I have the option of going with either the pro comp 22210/22415 springs or 22210 with a 5" block. With the block I'd be saving around $200 but I guess my main concern is ride quality. Dont know if the stock rear springs have issues like the front do. I'm probably going to go all spring but it would be nice to save a few bucks.
View 14 RepliesFinally pulling the trigger on some springs so I can get this work done, Tousely prices were great on the W's compared to local dealers. Here are some questions.
1. I am planning to go with the W springs up front.
2. Can I still use the B for the rear mod, or do I need C's to keep it level? (Or F's)
3. Do I need blocks in the rear, or just the springs on the axle?
4. Do I need the 2" shackle up front?
5. I have dual Fox shocks that came with the ex when I bought it. The prior owner said they ran a little rough. Are they able to be re-valved, or is it cheaper to go with Bilstein?
I've done a ton of searches and everyone talks about the 250 rear blocks being 2 inches. I got under my truck the other night and my factory blocks measured to just shy of 4 inches. It seems like everyone says that those blocks only come with the 350s...
is there some sort of package that I might have to come factory with the larger rear blocks?
I have a quick question, but thinking of changing out my stock OEM rear axle blocks for the 2012 F350 SD 4x4 SRW type.
Does it matter what the wheelbase is?? Model being a CC, SC, etc?
Or...are all 2012 F350 SRW rear axle blocks the same?
I recently purchased a Rear Bumper Protector for 2010-2014 Toyota Prius for my 2014 PIP. I thought I had it in the correct position when I removed the adhesive strips to install it but realized the next day that the curvature is not lined up properly causing a gap in between the bumper and the protector. My stomach sank when I realized this error.
View 8 RepliesI want to know if there are any issues when removing the rear block, also do I have to put a new block in or can I just leave it out ....
View 12 RepliesFor the second time in the last 24 months, my rear defroster doesn't seem to be working. The first time I took it into the dealer and under warranty, they had to replace the entire rear window. The side view mirror defrosters still worked and they still work now. It just seems that the rear isn't working again and this time my warranty has run out.
Should I take it back to the dealer and hope they honor their work? My 3yr/36k expired 4 months ago. How could I even test that it is working? I've only had to use it 2 or 3x since last Feb. and that's when I noticed it doesn't seem to be working. I only had to use it for short trips so the main defroster in the cab eventually defrosted the rear window. The weather is warmer so now I won't have as many chances to have it fogged up.
Picked up new truck on Thursday, drove it on the hwy for the first time today and it feels like rear end is bouncing. Truck has 150 miles. I'm hoping it's just balacing that it needs, taking it back to dealer on Monday.
2014 F150 Limited 4WD.
I can't believe how rusty my rear end is with 17000 miles? It's not flaking off rusty but it's not black anymore, is this bad ? I was thinking of painting it , but not sure if it's worth it????
View 12 RepliesI want to install seat covers in my new 2012 screw, and I was wondering if there is a way to fold down the seat backs of the rear seat. It would definitely make the installation easier. The dealer unfortunately had no idea. I looked and tried, but have not been successful.
View 11 RepliesI have a 2012 f150 supercrew ecoboost with 6,000 miles on it. I just took it into the dealer for a clinking noise from the rear end. It happens when shifting between D and R and during dowshifting at low speeds. They said that ford is aware of this noise but does not have a fix yet.
View 2 Replies