Ford F-150 (2009-2014) :: 2012 - How To Keep Fog Lights On With High Beam On
Dec 14, 2012
I have a '12, F150. Is there a fix to keep the fog lights on while on high beam?
View 6 RepliesI have a '12, F150. Is there a fix to keep the fog lights on while on high beam?
View 6 Repliesmy high beam switch works if I hold the switch in the forward position, but it won't stay on when I let go. Is there a fix without having to replace the switch?
View 4 RepliesI have a 2013 F150 FX4. When the temperature is below 45 and the truck is cold the right high beam wont turn off if used, until the truck engine is warmed up.
View 6 RepliesI have a 2010 f150 super crew, last night when leaving my baseball game I was shocked to find my running lights and my regular beam lights don't work. My high beams work fine but nothing else. I'm pretty sure the lights are an after market light, but I'm not positive since I purchased it used. I looked in manual to check for a fuse issue but I don't see anything regarding the headlights.
View 1 RepliesI'm currently our of town, and will be so for several months. With that said, my wife told me today that when she pushes the lever forward for the high beams that nothing happens, but when she pulls it to the rear (as if she were only flashing the high beams) they work fine.
I figured I could either order parts while i'm away or start doing a lot of homework to find possible issues/fixes.
I have a 2012 Hyundai Accent GLS and recently noticed that my low beam only works in the high beam setting and the high beam doesn't work.
View 10 RepliesFor my 2013 with HID lights, I'm adding a light bar, and trying to find a good wire to tap into so I can wire in a relay to turn the light bar on with my high beams. As it's going to a relay, I originally thought to use a fuse tap, but the high beam fuse is always powered. Any other wire I can use in the cab?
I'm also looking for an in cab wire for the reverse lights I'm adding. I've been trying to make sense of the wiring diagrams online, but I am not having any success.
Ok we have a 2012 F-150 and are trying to hook up a 16ft trailer but have no lights. We know the trailer wiring is fine (works on other vehicles) but we have no power at the 4 pin trailer connector. We have checked the fuses and all are fine. Having this problem on a 2012?
View 14 RepliesOK, I have looked everywhere I can think to look and can't fined anything on this. Dash lights how do you turn them off with the engine running. This is on a 2012 f150 xlt.
View 4 RepliesMy service advancetrac light comes on about once a month, seems random but when it does the turn signals will not work, you have to hold indicator in place for signals to work-not to safe. My local dealer has not been able to fix issue...
View 3 Replies2011 f350 king ranch... I have DRL, turn signals and tail lights. I have checked all fuses ( don't know if there's a relay) under hood and in cab. Still do not have any headlights, high or low beam nor do I have any fog Lights.
View 5 RepliesI have a 2001 f250 with factory fog lights. ive been researching to see if I can make my fog lights turn on with the high beams without pulling them out. My broke and cant pull it or it comes off, but will still work to turn head lights off and on. How to make them come on with the high beams?
View 14 RepliesSo I recently bought a 1997 7.3l F250. It is in fairly good condition, but it has some problems with the lights working. The turn signals and hazards all work, as do the tail lights and headlights. However, when I hit the high beam switch, the headlights cut off entirely. Also, the brake lights do not work at all. Ive checked the bulbs and since they all work Im not sure what the issue is.
View 3 RepliesI have a 2012 gti with oem bi-xenon head lights. What code or setting do you use on vagcom to bring on the fog lights when I turn on highbeam?
View 3 RepliesAll you need to do is pull out the head lite switch find the solid brown wire that is the running lights wire now find the yellow wire this is fog lights wire (these wires are on the gray plug ) you need a 3" piece of wire and 2 blue wire connectors it slips over the wires no cutting any wires then slide wire in the other end of the blue connector after you jump them your fog lights will come on with running lights and will not go off with high beams...
View 4 RepliesLast week my wife's battery in her 03 Trailblazer was dead in the morning. I jumped it and it seemed fine all day. That night I tried to start it and it was dead again so I replaced the battery. The next day, she looked out at the parking lot at work and her lights were on after it sat for a while. She could not turn off the headlights no matter what. She said she heard a squealing noise under the hood.
I could not duplicate it when I got home, so I replaced what I think was the lowbeam relay. Later that night I looked, and her headlights were on. I got under the hood and the highbeam relay was squealing. I removed it and the lights went out. I replaced the relay with a new one, but the relay immediately squealed and the lights went on. I have the relay out now and the problem is gone, but we have no highbeams.
What is causing the relay to squeal and turn on the highbeams?
I have a 2013 Accent and have installing driving lights. I am looking for the correct high beam wire on the driver's side on the headlight assembly. I will then run this to a relay so that when I turn on my highs, the driving lights will come on. I have tried to locate the correct wire but the one wire that is hot when the highs are on, is still hot when the car is off as well as the lights.
View 6 RepliesI bought a 2009 Accent last week after my 1987 Camry wagon bit the dust. It has 47000 km and seems to have been very well maintained. The only problem I have noticed is that the high beam indicator light does not come on, although the hi beams do work. I downloaded an owner's manual but am not sure which fuse the indicator light is on; in any case, everything else seems to be working so I expect the bulb is burned out. My problem : I don't know its location on the instrument panel since it has never worked, and I don't know if it is possible to replace it without special tools.
View 2 RepliesHow do you activate the parking lights with the blinker/high beam stalk. It has the P....
View 7 RepliesI have a 2010 prius. I bought the car used a month ago. at the time of purchase both parking lights were on when my headlight is turned on. Now it won't turn on unless I turn on my high beam. Should I take it to Toyota dealer and have them take a look at it. It is certified preowned.
View 4 RepliesI have an '06 Camry, which has lost all power functionality. The follow items just stopped working
1. Key fob -- keyless entry and alarm stopped working
2. high beam doesn't come on when headlight is on. However, when headlight is off, it comes on--go figure
3. Power door lock also does not work, even from driver side door. Have to lock all doors manually
4. Interior lights don't come on when door is open.