Ford F-150 (2009-2014) :: 2011 - Shutter Type Sensation Noticed At Light To Mid Throttle
Jul 3, 2013
On my '11 5.0L I've noticed at light to mid throttle if I get into 5 or 6 with the rpms down near 1k or so it will have a light but noticeable to me shudder type sensation. At first I thought maybe it was a converter lockup effect or possibly road noise but the more I drive the more I notice it. Very indistinct and mild with no check engine light and mileage was 17mpg mixed so I'm pretty convinced its not an engine shutter- but I have no experiencing dealing with these coyotes yet...
View 4 Replies
Advertisement
Hate to make a question like this my first post here, but anyway. Just got an '11, 5L, Scab, only have 350 miles on it and absolutely love this thing. Since I've never driven any other '11 F-150 I'm not sure if what I am feeling is normal or not for these trucks. With a light foot, driving around town my truck feels like it has a very slight shutter just before the 2-3 up shift or between 20-25 mph.
I have felt it in the 1-2 up shift but it appears to be intermittent but almost 80% of the time. Had a cup with ice-water in the cup-holder and exactly between 20-25 mph on the 2-3 up shift the water in the glass slightly ripples and caused the ice to slightly chatter. Is this normal or should I take it back and have Ford look at it?
Oh forgot to mention if I give the truck more aggressive throttle pressure I can't feel it, only seems to be low speeds, such as driving through a neighborhood or parking lot. I hoping it just needs to be broken in yet.
View 3 Replies
I have 2011 f150 5.0 with 38,000 miles and the throttle body seized up tight.
View 10 Replies
I have a 2011 f150. I go to put it in reverse no problem after I'm done backing up and put it in drive. The truck does not go anywhere but it will race up to about 4000 rpm without even having my foot on the throttle. Put in park then back into drive same thing happens. Put it back into park turn the truck off start it again and no problems. It drives just fine. I've had it to the dealer they say it is not throwing any codes so there is nothing they can do about it.
View 4 Replies
I've owned this 2012 Lariat 5.0 for about 6 months (has 49,500 miles on it, approx 6000 are mine).
For awhile, I had kinda thought I sensed a slight vibration/grinding when making right-hand turns. But it seems to be getting more noticeable now. It does not happen with every RH turn, but its not all that rare of an occurrence either. (Does NOT happen with LH turns.)
In addition ............ possibly related, sometimes while breaking, I get a somewhat similar grinding sensation, just before coming to a stop. Again, it does not happen every time.
I tend to think both of these could be a brake issue, but wondered if anything in the driveline could be contributing ? (I should note that I'm in 2-High)
View 12 Replies
I have a 2009 F-150 Supercrew. I have noticed that when I am going down a hill and hit a bump with my foot on the brake pedal it depresses and I get a springing sensation from the pedal. It almost feels like I am depressing a spring with my foot and then it comes back to normal ???? Just yesterday I was on an off-ramp of the interstate in a sharp curve and it did it without hitting a bump ???? What is causing this or how to fix it ??
View 1 Replies
I have a 2012 4x4 f150 163" wheelbase 8' bed that vibrates/shutter when you take off you fell it more when you are on an incline and a WHOLE lot more when you have a load on the truck (trailer/load of fire wood).
View 3 Replies
Having issues with the vacuum falling off to the hubs when driving and light throttle. I know makes no sense,but kept fighting this thing making vary harsh rubbing sound since I bought it used and I know its the little collar on the back side of hub that engages to hub to make the 4x4 connection but it looses vacuum when driving and very light throttle/load.
I verified using a vacuum gauge ran inside vehicle when driving. Checked all lines and hubs,everything good. Solenoid has vacuum when running but seems to quit when light load or throttle and as soon as vacuum falls off then the collar starts to engage and rubs but doesn't fully engage. I don't get it. Unless there's something on the computer side of it shutting off the solenoid or something.
View 14 Replies
I have noticed on my 2013 F150 Eco that I have seem to always have a oil type smear. on the inside of my windshield. It is very hard to clean. Looks like the ones I would get when I smoked many years ago. My Boss has a 2011 F150 ECO and we have two others in our company. We were talking at work today and it seems all 4 trucks are having this problem.
View 14 Replies
I just bought a 2010 F150 XLT XTR SuperCab 4X4 with a 4.6L 3V engine. I had a 2003 5.4L and a 2004 V10 before and this new engine seems to be nosier then the older ones I've had. It's a ticking/fluttering type noise I here when I'm standing outside the truck while it is idling. Is it normal for these newer 3V engines to make this noise? My wife has a 2009 Hyundai Santefe and it makes a similar noise just not as loud. Does the 5.4L make a similar noise also?
View 12 Replies
Wanting to put the raptor 3rd brake light on my 2011 limited not sure what has to be done or if they make a harness to allow it to work. What did it take to do it ??? I just like the running light it has kinda cool....
View 8 Replies
I just bought a 2011 F-150 with the 6.2 liter engine; only has 80k on it. After going for a ride today and stepping on it a couple times the oil pressure gauge went down to zero and the light came on. I shut it off and restarted and it was normal again but came on a few seconds later. I repeated the process a couple times and now its seems fine again.
View 7 Replies
A close friend of mine just traded in his '04 Tacoma with ~240k miles on a 2011 F-150 EcoBoost XLT Screw 6.5' bed w/ 3.73's. Truck has ~75k miles He went the EB route after I was having the tick/tap issue with my 5.0 (yes... a 5.0 guy talked someone into the EB ). Actually was my first time in an EcoBoost truck and MAN is that thing quick, especially with the 3.73s.
Truck is very clean inside and out and was well cared for. He did throw a blinking CEL light (assume misfire) after a rainy highway trip, having to tip into the throttle to pass someone. I had already mentioned that might happen so he knew to expect it.
We are planning to do anything "non invasive" to prevent the issue (e.g. no IC drilling). We plan to swap out plugs and boots. Looks like plugs should be Motorcraft SP534 gapped to .030 and boots are Motorcraft WR6135.
What are the torque spec for the EB plugs? For my 5.0, spec is 124 in-lb. Looking like 133 in-lb from a couple of sources. Is there anything else we should be doing to prevent a misfire CEL in the future? He doesn't baby the thing and the CEL only happened the one time so far.
View 14 Replies
I'm having issues when shifting into reverse and I it goes into limp mode when the wrench light shows up. This will not happen when shifting into Drive. When in limp mode I get engine code P0720. This calls for a bad Output Speed Sensor and my research says the sensor is on the back of the transmission but I cannot find any sensors on the transmission. there are several connectors clipped to it but I don't see any bolted in sensors. Also I cannot find a replacement sensor anywhere so I'm wondering if this is a generic code.
View 3 Replies
2011 eb just turned 36k. Today on breezeway it shuddered like it swallowed a bird, and check engine light flashed on. Went to see customer left and light was off. Back on breezeway and shuddered on entrance ramp so this time I stayed into it so either there's a light that will stay on or just launch it and this time the dealer will have something to fix that they can diagnose. Check engine light is on its fine as long as I stay out of the pedal. Still have 8 months left on power train warranty but what am I looking at for a diagnose, there is definitely a problem now. What the dealership should see?
View 7 Replies
I have a 2011 F150 supercrew 4x4 5.0, it has almost 8k miles. I have looked around online to see if this is a common issue but haven't found anything really. The airbag warning light in the instrument cluster will come on and stay on randomly. Some days it only lights up when I start the truck, other days it will turn on and stay on until I restart the truck. I think I have a glitch or a malfunction in a switch somewhere with the Airbag system. I will be calling the dealership about it after we finish the Easter Weekend.
View 5 Replies
Title says it all come to a stop, step on throttle nothing, let off and step on it again it goes, does some one have to be killed before Ford knows there's a problem, it's happened to me 3 or 4 times in the last month, dealer checked said there's no codes so nothing wrong. OK I forgot the good info 2014 eco screw 4X4.
View 12 Replies
My '05 Expedition will be driving normal at highway speeds, and when I need to apply a little more throttle to start up a hill I get a shutter thru the truck that sounds and feels like driving over a rumble strip. It doesn't last but just a second or two, but it happens frequently. Is it something in the 4wd? Transmission? or.......?
View 3 Replies
I recently purchased a '13 FX4, i love the truck, the Ecoboost power is incrediable. Recently while passing someone it made a horrible grinding sound, the dealer advised that it was known turbo issue that should have been corrected before we took delivery of the truck. When we took it in the dealer called and said they have Ford corporate involed because when the truck reaches WFO the four wheel drive tries to engage. Said it might be soem sort of vacuum issue.
Specs : 2013 Ecoboost Screw FX4 short bed. No mods, 6500 miles.
View 10 Replies
Resetting Throttle Response. I came across this video, bored and just playing around, and tried it on my 2013.......and it works! Turn the ignition key to the run position, then slowly press the accelerator pedal to the floor. Then let the pedal up fast, then turn the ignition off. Do this 3 times, and on the last time, also turn the ignition off. I was amazed that that the lagging pedal response was almost completely gone!
View 4 Replies
Experiencing sluggish throttle response on the EFI Ecoboost? I have had several incidents where I'm needing to change lanes fast and the response is a dead second or two before the motor catches up to the throttle position. Then, it rockets forward at full throttle to catch up. By that time it's too late to change lanes and I have to be on the brakes hard to keep from rear ending the guy in front of me. I'm coming from a carburetored Toyota Tacoma that was far more responsive (minus the power) then this truck. I never felt hesitant to jump on it and go. Now I feel like my life depends on waiting until I have all day to change lanes, make a left turn or pass a slow moving vehicle on a two lane road. Is this something the dealer can adjust?
View 14 Replies
