I have a 2011 f150 with the 5.0l motor. I had to replace the head gaskets and I am putting it back together and I am wondering if I will need a special tool to align the cam gears/camshaft/timing chain. to get this back together. I can't seem to find a thread or an article to guide me through the process.
View 2 RepliesCompared to our 2008 F-150 seats, the angle of the new head rest is way more forward, to the point I am slouching forward when driving. I don't see any way of adjusting, except up, down and remove. How to take the upholstery apart?
View 7 RepliesBought some power tow mirrows, aftermarket, any special on installing?
2011 F150 Echoboost, 4 x 4
I've never replaced a car stereo and have no clue what to look for as far as compatibility goes. My '09 Forester has a am/fm/sat. radio hookup/ 6 cd changer. Do I have to look for a specific stereo head other than it being a 2-DIN?
I'd like to be able to continue using the aux port that is in my center console, and I would like a USB port that I can plug a Galaxy S4 into.
If you have a blown head gasket on a 6.0, after the gaskets were removed would you be able to tell where the gasket failed?
Since the gaskets are metal or multilayer metal in some cases would you be unable to tell where the gasket failed or would it always be visible?
I just had headgaskets (oem) studs, egr delete,oil cooler done on my 06 plus water pump cause the gasket blew. I have a sct livewire hooked up monitoring everything and tonight i noticed that the eot and ect's were way off. fully warmed up and rolling 65 Anywhere from 40*-50* out it was eot-156 and ect-172. Degas bottle was at the normal level.
I am also having issues with the fuel gauge. Every now and then the gauge will go to E and the miles to E will display ---. Turn the truck off and back on it works again. I am half assuming its the plug on the sending unit or the sending unit itself.
I just pulled the cab and did headgaskets, studs. I put everything back together and when I turn the key, nothing, no lights, zero.
I've checked all connections and batteries are good, checked all fuses, where to start with this?
So I am just wrapping up getting my head gaskets done for the second time. Last time was 7 yrs ago. Truck now has 90K mi on it and I have had nothing but Matt's tunes on it since the head gaskets were done originally. I have only towed once and I put the 8K tow tune on for that trip.
ARP studs were used but heads were not decked then. OEM gaskets, done by Ford.
So a head gasket failures with ARP studs and doing everything else the FTE way?
New heads are decked and o-ringed. Planning to go a little more gentle with the tuning, but don't really want to. Driving it stock just sucks.
Ran fine, did the head gaskets ,egr delete, oil cooler and 12mm dummy plugs. Primed the fuel system, oil pressure looks good on the guage , spins fine but doesn't seem to be making any attempt at starting . Gave it a shot of quick start and it never so much as kicked. Everything looks good, nothing leaking and nothing obvious. To top it off we are without power after Hurricane Mathew left his mark.
View 14 RepliesI have a 2006 6.0 that i did head gaskets on about a year ago. While I was in there I put some new pistons a valves in as well. I finished doing the job and it started and ran great just smoking a little bit. Test drove it a couple of times and still seemed great but still smoking. (white smoke) about a week went by with me driving the truck then one day driving to work I parked it then all of a sudden the truck shut off like some one hit the key and wouldn't restart after that. Either doesn't work i put a ficm in it before the head gaskets went out. new HPOP before head gaskets. I get oil pressure in the dash but it takes a long time to build up. cranks like a dream but doesn't even try to fire.
View 14 RepliesI have a 1995 aero with 4 wheel drive and a 4 liter. Lent it out and the engine was run without coolant. Pretty sure the head gaskets are blown. I found a replacement 4 liter from a 92 explorer and wondered if it would swap in. Will the bolt pattern match, computer, mounts,etc?
View 5 RepliesI have a leak between the metal and the plastic of my water crossover.
Do I need to remove the manifold to replace the gaskets for the crossover and if so looking for a good thread showing how.
Just bought a 2005 F250 PSD, got a smoking deal on it. It has 321k miles and has been very well taken care of however I do believe that it either needs a new oil cooler or has bad head gaskets. Pictured below you will see what the coolant looked like when I let the first batch lose. It does not seem foamy, which is interesting to me, however there is NO EGR to cause this soot.
About the truck:
- It was bulletproofed at 50k miles (EGR delete, ARP head studs, etc).
- There is no puking of coolant (drove it 100 miles from where I purchased it and nothing)
- When the truck is started you have to let it warm up for about 10 minutes,otherwise it seems to not have full power. (was going to reflash the ECU in hopes this repaired that problem).
Can the mechanic put back my motor even if he claims i wont start? He claims the head gaskets blew out but i dont understand how they blew out over 3 days when he had my car.
View 3 RepliesI took my sub and amp out of my SD when i traded it in and I want to put it in my new truck but it has a stock head unit... I am not wanting to put a new deck in so I am curious how to do this with the stock stereo. I have a 2012 f150....
View 14 RepliesI have a 2005 F350 6.0 PowerStroke, and I just did the head bolts upgrade to the ARP studs, new EGR cooler and a new stock turbo. Looks like everything came out good, no left over parts or unplugged connectors, all new fluids and fuel filters and oil filter. Did the priming of fuel and oil, the turbo. When it was ready to turn it on, I turned the motor by jumping the starter to build some oil pressure.
Now I turn the key to turn on the truck, it turns with no issues, it sound good, but it will not turn on.
Checked my batteries, they are fully charged, checked fluids, ok, checked oil pressure as I'm cranking it, it looks good.
It still does not turn on.
So, I jumped it with my friends Excursion, after a couple of tries, it TURNED ON.
Let it run for about 3 minutes then turned it off. It sound good just like it did before the upgrade, with an exhaust leak from the turbo.
Went to turn it on again, it turns but it will not start, jumped it again and it RUNS.
Now I let it run for about 30 minutes figured out where the exhaust leak was coming from.
Shut it off, Re seated exhaust pipe with leak, WENT TO TURN IT ON AND IT WILL TURN BUT WILL NOT RUN.
So what checks I can perform to start eliminating possible issues.....
My Subaru Outback 2004 has 136,000 miles. Recently the check engine light came on and the mechanic diagnosed leaking head gaskets, cost to replace $2,000. Does it make sense to fix it or bite the bullet and get a new car?
View 3 RepliesMy wife backed the truck into a pole and bent the driver's side bumper and one of the ears on the trailer hitch (the part that bolts to the frame). I bought all the parts that need to be replaced (the left bumper end, the hitch itself, and the plastic bumper cover), gut am hesitant to try to change it all myself. How hard is it to change out all these parts? Is there a write-up any where out there for this?
View 2 RepliesI though I would like the tailgate step and assist handle. They are always in the way and I want to get rid of the handle but keep the step if possible. Can I remove the plastic tailgate cover, pull the hande and re-install a metal tailgate cover.
If not, want to swap a tailgate. Its red, has the back-up camera and, no dealer markings and in excellent condition.
I have a 2013 Ford F150 XLT Supercrew with the 'jump' seat in the middle. When I fold down the center seat, I hit my elbow while driving and turning.
I'm contemplating removing the center jump seat and replacing it with a Ford center console. Is it just a matter of removing the center jump seat bolts, then bolt in the new center console?
I see on the Ford parts website a adobe center console : 2013 Ford F-150 Floor Console | FordParts.com
Of course, then what do I do with a center jump seat?
I have a 2002 Chevy Impala, 3.4 engine. Mileage is at about 235k. About a month ago I had to replace the radiator because the car was overheating. Not even a week later, the low coolant light was on (even after I filled the reservoir) and the car was once again getting really close to overheating. I took it back to the mechanic who replaced the radiator. He checked and said the head gaskets were bad. He showed me where they were cracked/torn and showed me that I had coolant mixing with my oil. I haven't had the money to fix it, so since then the car has been sitting in my garage.
I have drove it maybe 5-8 times though (to the grocery store down the street, etc.) Should I even invest anymore into this car, considering the age, mileage and problems (fyi, the car was in an accident so there's some body damage to the hood, front fender, the a/c isn't working)? Would replacing the gaskets or buying a used engine be a smart move? Or is it better to purchase another car? I only have about 3k to go towards another car, so I'm kind of afraid I'll get another one and it will have the same (or worse) problems.