I have a 2011 Ford FX4. Lately when I start up the truck I get a grinding type noise that seems to be coming from the 4X4 RCS module in the engine compartment. It stops after about 20 seconds or when I put the truck in gear and start driving. It happens every time I start the truck now.
View 3 RepliesExperienced noise coming from the temperature control unit? I generally hear it immediately after turning on AC or Heat and then when I adjust the tempature up or down. It only last for a few seconds then goes away. I plan on taking it by the Ford dealership. 2010 F150 Platinum...
View 7 RepliesThe fuse was not blown. The bus connection for that fuse was burned from a high capacitance caused when there is a loose connection.......period.
View 13 RepliesIt's a balmy -11 c here, my remote start wouldn't work... I go outside and try to manually start the truck and it turns over for 5 or 6 seconds with ZERO catch.... Fuel tank is at 1/4.... Added some fuel just in case... Nothing.... 6700km and it's dead in the driveway.
View 4 Replies2011 f150 5.0... When I turn the key it cranks for about 10 secs I don't hear the fuel pump come on what should I check first before replacing the pump....
View 3 RepliesBought the 2011 F150 Lariat used, no window sticker shows online, got a build printout from the Ford parts man. According to the build, it says "with remote srart".
Got one key and separate fob with the truck....just a black key, not the remote key. Had a second black key made at dealers expense and kept one remote from the trade in. All works well but.....Would like to have the remote start functional.
Dealer says buy the key, $140, plus cut and program. Lock shop says $190 for it all.
My question is if I buy the key and have it cut, can I program it properly in the truck....including remote start.....since I have two regular coded keys?
My Dad's 2011 Raptor has been having starting issues for about a month now. He turns the key, it turns over, but doesn't actually start; the same thing happens if he tries to start using remote start. It will start once in awhile on a 2nd or 3rd try, after throwing the shifter back and forth from Drive through Reverse several times and trying again, but not most of the time.
It doesn't happen all the time, but every once in awhile, and always at random times.
The first time was accelerating at an intersection a month ago. A second or so after hitting the gas, the engine died in the middle of the intersection. He took the key out, threw the shifter back and forth, tried again, and it started right up without issues.
Later that night, he tried starting it after sitting for over an hour (and had started it several times before without problems), and it failed to start, even after 7 or 8 tries. He had it towed to the dealer the next morning. He even tried starting it that morning in the dealer parking lot, without success. Several technicians apparently started it several times later that day without any issues! They didn't fix or replace anything, because they didn't find any problems. When he got it back, it worked perfectly.
A couple weeks later, it had the same problem at the gas station, after getting a full tank. My Mom told him that her truck (a nearly identical '11 Raptor) had the exact same issues several times in the past, and her trick was to let all the lights in the truck turn off, then try starting. He did that, and it worked!
Tonight, the same issue emerged. He did everything that had 'worked' in the past, and it still failed to start after about 10 tries. It's headed to the dealer on Monday, but what it might be?!? I also want to add that when it starts, it starts flawlessly, without hesitation; as if there wasn't a problem.
No power to the radio or cd unit. When I push the power button nothing comes on. Also my clock is flashing and I can't set it. What is the problem?
View 1 RepliesI took my sub and amp out of my SD when i traded it in and I want to put it in my new truck but it has a stock head unit... I am not wanting to put a new deck in so I am curious how to do this with the stock stereo. I have a 2012 f150....
View 14 RepliesSo one of two things is happening:
1. I'm paranoid because I just bought my 2011 3.5 Eco 4x4 a month ago and every little thing I hear go bump I stress over...
Or...
2. I've got a control arm/U-joint issue.
When I make turns beyond say 20 degree wheel turn (so almost 90% of turning distances) I hear a groaning type sound coming from the truck. Sounds like it's located in the front suspension area. Sounds like the sound is following the rotation of the wheels though if you can visualize what I mean.
I've had new tires put on since I bought it Oct. 5th but just noticed the noise about a week or two ago. No other work done since purchasing.
I have a 4x4 2011 5.0 f150 with 65k miles. Bought it 4 months ago. I have noticed it makes a swoosh or air sucking noise for a couple of seconds after acceleration and will do it while driving. It is not constant but comes and goes. I have not checked codes. Other than that, really like the truck.
View 2 RepliesMy 2011 F-150 Super crew eb has started to have a knock that comes from under the dash in the radio area. It doesn't occur every time it's started. It is 3 or 4 knocks that sound like a plastic gear slipping, then it stops. I am thinking something in the vent/defrost door. Is it vacuum operated or electronic? Any thoughts?
View 4 RepliesI have a 2011 F-150 4x4 5.0 with about 45k miles. When I drive at slow speeds (ex. 5mph) and turn the wheels left or right there is a rubbing/growling sound coming from sounds like the front end. It does it either in forward or reverse. It's not a squeaking, clicking, or metal on metal sound. It does not do it when the wheels are straight. I rolled underneath and couldn't see anything that stuck out right away. What could be causing this?
View 12 RepliesToday I was out getting lunch in my Ecoboost When it started making an extremely loud grinding noise from the front end of the truck. My first thought was I blew a turbo. After holding the break and building boost I discovered it was not the source of the noise. Also the truck runs perfect and there is no smoke. I then took it to my friends auto shop and pulled both front tires off to check and see if anything break related came loose. We found nothing. The noise only happens upon acceleration or cruising throttle, as soon as you let off the sound goes away. So after I found nothing I took it to ford and what would cause that, but they assured me that they would have my truck for a long time while they figure out the issue.
View 14 RepliesThis evening, my F150 with 2,600 miles developed a high pitched squeal, much like you might experience on an older vehicle with failing front brakes. Yes, that same squeal/grind the brakes make...metal on metal. It came in instantly while at highway speeds. It was VERY loud. The pitch didn't really change with speed...it was pretty consistant going slow or fast. There was no vibration, chatter or growl as I would expect with a failing bearing.
It was definately in the driveline/brakes. I was 10 miles away from a friends house, so I turned around and took it back to his place. Shortly after turning around, it quieted, only sounding when I would turn ( like a wheel bearing would when being side loaded ). I looked at the brake disks, thinking something was grinding on one of them. The outsides of the disks looked fine. Due to the shields on the inside, I couldn't see.
Later in the evening, I had to drive it back home, about 50 miles. Again, it was quiet unless turning fairly hard. By the time I got home, the squeal had turned into an intermitant growl/thump, as if a warped rotor was banging on the caliper. The noise was 1 to 1 with the rotation of the driveline. But still no vibration. Brakes work perfectly and the noise doesn't change with brake use. Backing up and turning hard results in a variety of sounds, including squeaks.
The hubs and CV joints felt cool. The brake disks were not hot as if they were dragging.
It is 4x4 / 3.7l
I have a 2wd 2011 F150 90K with grinding noise coming from the drivers side front tire. Even though it was happening when coasting I thought it might be pads but they are real good. Turning the hub with no tire on it I can hear a little grinding. So I suspect bearings. I want to remove the hub but can't find out how to pull that off.
Where I would expect to find a spindle nut there is an area where it looks like you put a puller in. Can't find any videos or other information on the "Internets". Maybe I'm the first to have bad bearings? Anyway, how to remove the hub?
I have absolutely loved my 2011 F-150 8 cyl since I bought it in 2013. I'm just now having my first issue...
For the past two weeks or so, I've had an issue with intermittently hard starting. It cranks like normal but doesn't turn over instantly. The longest its gone before starting has been about six seconds. Although originally happening only 10% of the time, its happening about 40% of the time over the past couple days. I had my mechanic take a look and the battery and starter all checked out fine.
Biggest problem was that it never did it for them making it hard for them to trouble-shoot. Thus far its always started, just takes an indescript amount of time in which to do it. The time of day doesn't seem to matter although afternoons in which I'm heading to lunch after being in the office for 3-4 hours seems the most common time.
I have a 2011 F150 FX4 with the traction control. When the tires spin (like taking off on a hill in the rain - that's when i noticed it) and I let off to let everything settle down, I hear a rattling kind of noise coming from the middle dash area, maybe on the engine compartment side of the firewall. It sounds like a rubber ball in a box being jostled around. What this might be?
View 3 RepliesI purchased a new 2011 F-150 Lariat, Ecoboost, SCrew, 4x4 last weekend. I love the truck. It is very comfortable, the Ecoboost has been incredible, and the ride is very nice. I am looking forward to towing my ATVs after I hit 1000 miles.
Yet, I have one problem. I get an incredible amount of wind noise and wind whistle from what appears to be the driver's door. I read other posts about wind noises and wind whistles (e.g., bug shield), but they do do not apply to me.
I'm planning on dropping it off at the dealership this week for them to take a look at.
My 11 f150 started to make a jingle noise like washers in a bag while driving over uneven bumpy roads. Normal highways are fine and it does it turning or going straight. Seems to be coming from drivers side. I replaced the swaybar link ends with moogs. Didbt fix the problem. I also removed the bushings abd lubed them with white lithium grease. Still the same sounds on the same conditions. I did t replace the bushings with new ones. I still have a extended warranty on the truck. Might take it in...
View 1 RepliesI have a 2010 XLT, 85K, just started having a horrible grinding noise at start up for about 2-3 seconds, then gone. Going to dealer tmrrw. Multiple people said, possible oil pump hydraulics, ??????. Whatever it is, they say its expensive!!!!!
View 3 Replies