Ford F-150 (2009-2014) :: 2011 - Groaning Noise While Turning
Nov 25, 2014
So one of two things is happening:
1. I'm paranoid because I just bought my 2011 3.5 Eco 4x4 a month ago and every little thing I hear go bump I stress over...
Or...
2. I've got a control arm/U-joint issue.
When I make turns beyond say 20 degree wheel turn (so almost 90% of turning distances) I hear a groaning type sound coming from the truck. Sounds like it's located in the front suspension area. Sounds like the sound is following the rotation of the wheels though if you can visualize what I mean.
I've had new tires put on since I bought it Oct. 5th but just noticed the noise about a week or two ago. No other work done since purchasing.
View 14 Replies
Advertisement
I have a 2011 F-150 4x4 5.0 with about 45k miles. When I drive at slow speeds (ex. 5mph) and turn the wheels left or right there is a rubbing/growling sound coming from sounds like the front end. It does it either in forward or reverse. It's not a squeaking, clicking, or metal on metal sound. It does not do it when the wheels are straight. I rolled underneath and couldn't see anything that stuck out right away. What could be causing this?
View 12 Replies
My front axle is making a groaning like humming noise when the truck is cold and first starting to drive it. It does it when speeds are at 30 mph and under and goes away when putting it in 4WD. It sounds like the hubs but I'm not sure. The dealer hasn't been able to duplicate it because they haven't kept it overnight. I'm just wondering if this happen to the truck, was it fixed and what was the issue. Like I said, I think it may be a vacuum issue to the hubs, but not sure.
View 12 Replies
I have a 2011 Ford FX4. Lately when I start up the truck I get a grinding type noise that seems to be coming from the 4X4 RCS module in the engine compartment. It stops after about 20 seconds or when I put the truck in gear and start driving. It happens every time I start the truck now.
View 3 Replies
I have a 4x4 2011 5.0 f150 with 65k miles. Bought it 4 months ago. I have noticed it makes a swoosh or air sucking noise for a couple of seconds after acceleration and will do it while driving. It is not constant but comes and goes. I have not checked codes. Other than that, really like the truck.
View 2 Replies
I'm driving a 2000 Chevy S-10 pickup, 5 spd manual, with about 133k miles on. Truck has been great for the 11 years I've owned it. I've had this problem for a while, and for some reason am only getting around to it now, as I've never directly asked a mechanic to fix it or diagnose it. I think because it didn't seem urgent, and out of fear I'll get the runaround on what it actually is.
But now, what was once just a sort of "groaning sound" when I turned the wheel, has now actually turned into some tightness in the wheel itself -- especially if the car is cold or hasn't moved in a while. Here's a video clip of the sound: [URL]...
I suspect it's a problem with the power steering fluid system. I've been parallel parking for years, and don't know if that's what's had an impact.
View 6 Replies
Today I was out getting lunch in my Ecoboost When it started making an extremely loud grinding noise from the front end of the truck. My first thought was I blew a turbo. After holding the break and building boost I discovered it was not the source of the noise. Also the truck runs perfect and there is no smoke. I then took it to my friends auto shop and pulled both front tires off to check and see if anything break related came loose. We found nothing. The noise only happens upon acceleration or cruising throttle, as soon as you let off the sound goes away. So after I found nothing I took it to ford and what would cause that, but they assured me that they would have my truck for a long time while they figure out the issue.
View 14 Replies
This evening, my F150 with 2,600 miles developed a high pitched squeal, much like you might experience on an older vehicle with failing front brakes. Yes, that same squeal/grind the brakes make...metal on metal. It came in instantly while at highway speeds. It was VERY loud. The pitch didn't really change with speed...it was pretty consistant going slow or fast. There was no vibration, chatter or growl as I would expect with a failing bearing.
It was definately in the driveline/brakes. I was 10 miles away from a friends house, so I turned around and took it back to his place. Shortly after turning around, it quieted, only sounding when I would turn ( like a wheel bearing would when being side loaded ). I looked at the brake disks, thinking something was grinding on one of them. The outsides of the disks looked fine. Due to the shields on the inside, I couldn't see.
Later in the evening, I had to drive it back home, about 50 miles. Again, it was quiet unless turning fairly hard. By the time I got home, the squeal had turned into an intermitant growl/thump, as if a warped rotor was banging on the caliper. The noise was 1 to 1 with the rotation of the driveline. But still no vibration. Brakes work perfectly and the noise doesn't change with brake use. Backing up and turning hard results in a variety of sounds, including squeaks.
The hubs and CV joints felt cool. The brake disks were not hot as if they were dragging.
It is 4x4 / 3.7l
View 14 Replies
I have a 2wd 2011 F150 90K with grinding noise coming from the drivers side front tire. Even though it was happening when coasting I thought it might be pads but they are real good. Turning the hub with no tire on it I can hear a little grinding. So I suspect bearings. I want to remove the hub but can't find out how to pull that off.
Where I would expect to find a spindle nut there is an area where it looks like you put a puller in. Can't find any videos or other information on the "Internets". Maybe I'm the first to have bad bearings? Anyway, how to remove the hub?
View 9 Replies
I have a 2011 F150 FX4 with the traction control. When the tires spin (like taking off on a hill in the rain - that's when i noticed it) and I let off to let everything settle down, I hear a rattling kind of noise coming from the middle dash area, maybe on the engine compartment side of the firewall. It sounds like a rubber ball in a box being jostled around. What this might be?
View 3 Replies
105K miles, developing a groaning noise when turning steering wheel during low speeds and stopped. Can feel slightly through steering column. No other problems, no clunking or any grinding noises, just "groaning" sound on initial movement. Fluid is full. While searching fix, I found this article on the C70 model, sounds like I might have same thing on my XC90. [URL] ....
View 6 Replies
I purchased a new 2011 F-150 Lariat, Ecoboost, SCrew, 4x4 last weekend. I love the truck. It is very comfortable, the Ecoboost has been incredible, and the ride is very nice. I am looking forward to towing my ATVs after I hit 1000 miles.
Yet, I have one problem. I get an incredible amount of wind noise and wind whistle from what appears to be the driver's door. I read other posts about wind noises and wind whistles (e.g., bug shield), but they do do not apply to me.
I'm planning on dropping it off at the dealership this week for them to take a look at.
View 14 Replies
My 11 f150 started to make a jingle noise like washers in a bag while driving over uneven bumpy roads. Normal highways are fine and it does it turning or going straight. Seems to be coming from drivers side. I replaced the swaybar link ends with moogs. Didbt fix the problem. I also removed the bushings abd lubed them with white lithium grease. Still the same sounds on the same conditions. I did t replace the bushings with new ones. I still have a extended warranty on the truck. Might take it in...
View 1 Replies
2011 GLS 2.4L auto, 40K, out of warranty
There is a loud groaning/creaking noise coming from the front suspension area. At low speeds, this noise dominates all other noises and is directly related to hitting the gas or pressing the brakes, which produces a forward or backward force on the front suspension and chassis. I can sometimes hear it briefly just by pushing against the parked car.
My hope is that I can just tighten up some bolts and make this go away, but other posts suggest it may be struts, stabilizer links or other non-obvious sources.
View 4 Replies
You can hear the clunky, groaning noise around 8 and 11 seconds when I turn the steering wheel, making a tight u-turn in an alley way.
What can it be..? I hope it has something to do with my tires since I'm getting new ones today. The current ones are pretty bald.
Quick video clip of noise...
View 7 Replies
This is not my truck, it's my aunt's and she told me today that when she makes a right turn her steering locks up and she has to jerk it to the left, she plans on taking it in to the dealer to be fixed. Truck has 10k miles, 4.6L 2v, 4x4
View 13 Replies
When making turns and occasionally during slowing and accelerating, a klunk or pop sound comes from the front of the vehicle. It is a F-150 STX 2011 2WD shortbed with 16,000 miles. Engine is 5.0 with 6 speed auto. Previos owner had (before returning to stock) put a lowering kit in, headers back exhaust, intake, tuner, etc. Truck is butchered a bit from pos previous owner. Front end components have all been checked, bolts torqued. Even the cab mounts have been checked. The only thing that can be seen that might contribute is the cat crossover supports have been hacked off.
View 1 Replies
Just a quick question about the locking differential. I'm just wondering can you activate the locking diff while turning or on the gas pedal? Because today when I was climbing up an icy hill, I thought I'd turn on the locking diff,I was still on the gas when I pulled the switch. For a second I saw a warning on my dashboard, but quickly went away before I had a chance to read it. Just wondering in what conditions you can lock the diff. I also hear that you couldn't activate it while turning at a certain degree?
View 7 Replies
I own a 2010 ford f150 that make a grumbling sound when i turn. the dealeship has replaced the clutches for the limited slip rear end 2 times now and it is happening again. they told me that the ford engineers are working on the problem but they do not have a fix for it yet. So they told me to just drive it with the positive traction engaged until they get a fix for it. Not exactly the answer I was looking for.
View 14 Replies
Is there a way to turn all interior lights on the dash off when the headlights are off?
It is so bright that you can't see in the dark with everything off without being blinded.
View 6 Replies
I've owned this 2012 Lariat 5.0 for about 6 months (has 49,500 miles on it, approx 6000 are mine).
For awhile, I had kinda thought I sensed a slight vibration/grinding when making right-hand turns. But it seems to be getting more noticeable now. It does not happen with every RH turn, but its not all that rare of an occurrence either. (Does NOT happen with LH turns.)
In addition ............ possibly related, sometimes while breaking, I get a somewhat similar grinding sensation, just before coming to a stop. Again, it does not happen every time.
I tend to think both of these could be a brake issue, but wondered if anything in the driveline could be contributing ? (I should note that I'm in 2-High)
View 12 Replies
