Ford F-150 (2009-2014) :: 2010 - Bad Bed Shake On Small Bumps
Apr 10, 2015
I just picked up a 2010 f150 xtr 4x4 few weeks ago and I notice the bed shake is pretty bad when hitting small bumps int he road. I watch in my rear view mirror and it seems the drivers side is doing all the shaking, and the passenger side of the box seems solid (minimal movement like a truck should). It only shakes on bumps and does not increase with speed or anything so im assuming its Not my tires? I can literally feel the shaking in my feet in sync as i watch the box rattle in my rear view. Also look at my passenger seat and it looks like a vibrating chair, an extreme one.
I got under the truck everything looks solid, checked all the bed bolts are tight, i honestly have no clue at this point. I use to have a 2000 ranger and honestly I find the box shake on my new 2010 is just as bad as my old truck. My brother and cousin both have 2011 f150's and i find theres to ride alot nicer than mine. My truck is a supercab and theirs are crew cabs, however i don't see it making that big of a difference in ride? Checked tire pressures i have 30lbs in the back tires and 35 in the front. Like it said its only on bumps, doesn't start shaking on a smooth road, so im expecting some sort of bad suspension component?
trucks a 2010 f150 xtr 4x4 supercab with 18" wheels
View 10 Replies
Advertisement
09 stx 2wd 4.6L- I have a 2.5'' leveling kit and 33'' bfg a/t tires. The problem is when I make sharp turns, or turn and go over small bumps. Whats happening is something seems to catching or rubbing it kind of jerks towards the opposite of where I am turning and causes the traction control to slow my truck (sucks on tight off-ramps/ u-turns). this happens at pretty much any speed although it gets worse as speed increases. At first I thought it was the steering stoppers but don't have any wear on them, tires do not rub anywhere. My dealer and a local off road shop cant figure it out...
View 9 Replies
So I've got some creaking going on at low speeds only over small bumps. Sounds like it's coming from the passenger rear area. It's an 08 with just under 28k miles. I'm not noticing any issue indicating the strut being blown, it's just an annoying creaking. I didn't realize how noticeable it was outside the car until driving through a parking garage with the windows down on Friday.
View 13 Replies
I bought a 09 Sonata GLS in July, really nice other than dash noise, what has been described as crackle. Briefly, my sonata is makes crackling noise going over small bumps, more pronounced in colder temp. I have taken it in to the dealer 4 times, problem still persist. According to the dealer, Hyundai regional office knows of my problem, and there is no fix for it at this time. I just bought the vehicle and I am suppose to live with it?????
View 69 Replies
I have a 2009 460 awd with adjustable suspension and when making a right turn the front left side makes a noise. I have had the dealer look at it 5 times or more but each time I am told that there are no problems. Now that the weather is getting colder it is becoming more pronounced.
View 7 Replies
I've got a 12 FX4 SC 6.5' w/Ecoboost. After 1K miles I began to develop a shudder/shake in the tranny-driveshaft passing through 1500 rpm. 4 dealers, 6 overnights and 2 escalations, I finally am told there is a design problem in the pre Jan 12 trucks. Fixed with frame mod to manufacturing process after Jan, but no solution for current owners with the problem. I replaced my 07 FX4 SC with this truck and loved it for the first 1K miles. Now I hate driving it, especially in traffic (lots of cycles through 1500 rpm).
View 5 Replies
So my wife nailed a small spike buck and he when up under the truck. On his way back, his antlers hit the intercooler. One side tube was collapsed and the other collapsed but tore open. Has to repair one the tubes and, if so, with what. I was thinking I could pull the dent out with a pick and then put some sort of epoxy over it.
View 14 Replies
I have a 2013 F150 Ecobost. It is a 4 door 4x4 with the single rear drive shaft. When I pull my boat I get a very strange vibration between 60 and 70 MPH Mostly around 65. I had my balance checked all around on truck( not by Ford dealer) and took my Bass boat to the factory and had them go thru all the wheels and balance. It worked but I still have vibration. When I'm pulling the boat and the vibration starts I can see the trolling motor shaking on the front of the boat. At this time I do not think it is the boat. I have a tongue weight of about 350 Lbs. Having problems with F150 with a little load on the rear. Truck and boat are both new with low mileage.
View 9 Replies
I have a 2013 F150 with 80,000km+ Original front brakes. When I am driving around and hit any bumps, I can hear a rattle. A slight pedal will make the noise go away.
The pads still have lots of life in them, so besides replacing them, what can I do? Or, is it actually something else? I have a 100,000km warrentee.
View 4 Replies
I have a 2009 ford f150 4.6l 3v v8 standard cab with about 53k miles on it.
Recently the check engine light came on so i went to autozone to have the codes pulled for free, it says i have a small evaporative leak.
They said may be the gas cap, but the thing is, i have a quick fill cap that came in stock with truck so the gas cap isnt even needed.
I've looked under the hood, and noticed that there is little pool of oil on top of the valley of the engine on the passenger side of the engine, could it possibly be the PCV hose that is bad and be related to the evaporative leak code? or its unrelated and i have a bad gasket for the valve cover?
It isn't affecting the performance of the engine,.. yet. I have a road trip for my work coming up very soon and i wanted to try to fix it before then.
View 3 Replies
I have a 12 F150 with the 5.0L. it has 27000 miles on the clock. Noticed twice a small puff of white smoke coming out of the exhaust and decided to check the oil level and it was a quart low. The last oil change was done at 23000 miles and used Full Synthetic Pennzoil and a K&N filter. Called the local dealership I purchased at and they told me NOT to use full synthetic and should only be using Motorcraft semi synthetic with a Motorcraft filter. I know the dealerships will only endorse and advice Motorcraft products but what does everyone else use and think. In the meantime I added a quart of oil and all is fine.
View 5 Replies
2011 F150 Screw FX4 drivers seat squeaks. Its in the bottom. It happens when you go over bumps. It doesn't do it all the time, but you can sometimes make it stop by moving the seat forward or back.
View 3 Replies
I broke a nipple that a small hose connects to while I was changing my air filter. What this is and possibly some fix-it tips. I attached a couple of pics. one broke and one not broke.
View 9 Replies
What are some pros/cons you have with yours? Both 5.4 supercabs xlt im looking at just cant decide. The 09 has a overall higher rating but its not to much more.
View 6 Replies
We took our Ex to a local business and got almost 6k worth of work done prior to our trip. This included specific instructions to inspect the brake systems and replace anything that needed it. The work done included new front calipers, pads, hubs, new xrf ball joints, new shocks all the way around including dual fronts, a 6.0 tranny cooler and all new fluids. I alook tried getting a magtec differential cover installed but was told it didn't fit.
Long story short, while on the road we began to notice a grinding noise occasionally on small bumps. In reding ca our rear drivers side brake pads basically disintegrated and we were stranded while BigO replaced both pads, calipers and one rotor. They also advised that the slide pins were frozen on both calipers. This had no effect on the other noise I described.
Now that we're home we went back to the original shop and explained what happened. The owner agreed to take another look at the truck but basically said he stands behind his employees. He admitted that they chose not to examine the rear brakes to save usome "3 hours" of shop time. He also said that the rear brakes would've cost the same regardless of if they'd replaced them instead of BigO.
When my wife pointed out that our family had been first of all put in danger and secondly stranded by his worker's shoddy examination. He then preceded to ask why I insisted on doing so much work to such an old, high mileage truck. I left our truck with him so they could see if the sound could be traced back to anything they worked on and off course they didn't hear it.
I'm going back there tomorrow to take him for a drive and show him the noise which I repeat only started after their work was done. Am I wrong to be furious and think this crap is completely bs?
View 14 Replies
My AFS Xenons seem to shake / jiggle over bumps. Yes, it's the lights jiggling and not the car. It's really annoying. Is it due to the AFS mechanism? Essentially the bulb floats for AFS purposes and does not have any real hard mount to the frame? My previous car had xenon's that were rock solid.
View 8 Replies
I have a '98 Jeep Cherokee Sport 4Door, 4WD, 5-Speed Manual Trans, 4.0L Inline 6 cyl. mileage: 220,000+At highway speed if I hit a bump the car will start to shake like to fall apart. The only thing that stops the shaking is to ease of on the gas and it slowly subsides. What is causing this? Suspension? Transmission? Steering? Incidentally, the steering is not specifically affected, other than the fact that the whole car is shaking like a jack-hammer.
View 12 Replies
The roads here in Maine this winter were especially awful with potholes and bumps. My '03 Ford Focus Wagon has recently developed a noise that I can't diagnose. The noise can be best described as a "rattle" from the front end when going over very small bumps/cracks in the road. It almost sounds like loose shocks. They are the original shocks and have 130k miles on them.
Big bumps are not a problem. Car does not bottom out, sway upon braking, or bounce when I put my weight on it and release. Several years ago I had a "creaking" from the front end and my mechanic replaced some bushings which fixed the problem. I originally thought this was the same, but it doesn't sound like that - worried it could be the struts but I want to diagnose it a little better before I bring it to a mechanic and just say that I have a front end noise...
View 1 Replies
I recently did a brake job on an 02 Explorer, consisted of new pads and rotors (Rear). The Slide pins were fine and the piston was not frozen in the calipers.
Shortly after the Explorer will occasionally make this "thump...thump....thump..." feeling/sound.
It is not vibration.... it feels more like passing over small bumps in the road.
It is most consistent from 30-50mph, but I have felt it from 20-65.
It is more prominent on decel, but you can feel it on accel as well.
It makes no difference if you touch the brakes or not, or if you push the clutch in and/or take it out of gear.
Speed does not seem to effect the timing of the "thumps" it appears to be the same from 20-60mph. I'm at a loss...
View 9 Replies
I have a 2004 F150 4x4 5.4. Over the last few weeks I've noticed that when the truck has been parked for even a short time, when I start to move out I am getting a thumping noise from the rear, almost sounds and feels as though I am driving over small speed bumps, but once i get going it seems fine. Where to start?
View 5 Replies
I have 1, possible 2 motor mounts in my 2001 Volvo S-60 that kind of crunch/squeak when I go over small bumbs. Actually, the lower passenger side mount does the majority of the crunching noise. The upper mount (visible when you lift the hood) does it more so when its cold and the rubber contracts.
I'm not 100% sure the lower motor mount is what's making that crunching noise - but I'm pretty sure that's what it is as the suspension is in decent shape.
My question is, is it possible to change the lower motor mount myself? I've heard that the engine needs to be supported when doing this, but is that so when you need to only change one? Also, does it actually need to be changed or would any kind of lubricant will work?
View 3 Replies
