I just bought a new 2010 F150 and it came with the factory remote start with the separate key fob. Can I get one of the integrated key fobs and program it to my truck/starter? Also if that is possible where can I get one?
View 11 RepliesPurchased a key from ebay like the ones pictured. Long story short, after much struggle I've gotten it programmed to manually start the truck and to lock/unlock with the buttons. I have yet to program the remote start button. The information that I've found so far says to locate the remote start system override button to begin programming it to start the truck.
I installed the Ford remote start unit myself along with the VSS (vehicle security module). I have remote start working via a cell phone app. The vehicle security appears to be working as it should. There is no override or any other buttons on the RMST unit. Only an LED indicator light. The ebay vendor's listing states that the key can be self-programmed. So far they've been unresponsive to my questions. Am I overlooking something? Is there another way besides paying my dealer again to hook it up to their IDS to program this key?
On a 2010 XLT F150 supercrew, how hard would it be to add a remote start to it. I would like a factory type system, especially i can operated my keyless entry. How much am I looking at? and does the truck stay running when you open the door.
View 3 RepliesI just bought a 2010 f150 and it came with the single button remote start. I've been reading lots of posts about remote start but none with my issue. Mine when you push the button the horn beeps, ignition comes on, the seat slides forward, then the horn beeps just one time again, and it just sits there with the radio playing and not running. Everyone else is getting a 3 beep error code and I'm getting just the one beep.
View 8 RepliesI got a 2010 F-150 and just installed RECON headlights and taillights on my truck yesterday. Today, I went to go and use my remote start and the lights come on like it should and then it beeps 3 times and doesn't start. All my doors are closed. I thought maybe it was something with my hood sensor but I couldn't really find it.
View 4 RepliesThe 6 button powercode remote start and alarm will shut the engine down if you open the door after remote starting.
Here is the fix, I found it somewhere else. It's nice doing stuff yourself that the dealer tells you it cant be done.
open the drivers door
turn on the ignition
hold the program/override button for 15 sec (horn will chirp 3 times)
press the override button again horn will chirp 4 times
" " horn will chirp 5 times
" " horn will chirp 6 times
" " horn will chirp 7 times
" " horn will chirp 8 times letting you know you are in option bank 5.
press the panic button on the fob horn will chirp once
" " chirp twice
" " chirp three times
" " chirp 4 times
" " chirp 5 times
press the lock button on the fob once...your led alarm light will now be off.
Turn off the ignition
you are done
Enjoy
Activate the remote start open the door(smile) just don't press the brake before you put key in ignition and turn.
I have 2 fully functioning keys but I am looking at trying to program a miscut key I got for my truck just for the fob. What Id like to do is basically leave my key in the ignition and have a FOB with the actual key cut off so it is only the head containing the fob. I can remote start the truck, unlock the doors and then get in a use the key in the ignition as normal. I just hate the hugs key on my key ring. Is there a way to program the key fob, not the PATS key. Its miscut so thats not an option.
View 14 RepliesI am new to the F150 section. I come from the 7.3L Powerstroke area of the form, but am happy to have my new F150. Back in the day I made lots of F250 and 7.3L how to videos. I hope to do lots of videos on the F150 as well.
My first task was to add OEM Remote Start. I can't take credit for any of the information I've used in the video, I just assembled it onto YouTube! Trying to add OEM remote start.
YouTube...
I have a 2010 F150 with the 5.4 V8. How many cam shaft position sensor do I have ??? I replaced one but I swear I see one one the passenger side...
View 1 RepliesLooking for any tricks on increasing the range for remote start? Mine works great from house kitchen window to a detached garage, but would be nice if it would work through the window of a 2nd floor office building to the parking lot below. I see my lights blink when I remote lock the doors from up there, but the start wont catch. Tried a new fob battery---no luck.
Is it possible to add an antenna to the receiver in the truck (&where is the remote start receiver anyway?) Or maybe a handheld antenna near the fob?
Had a good half inch of freezing rain on the window after work today, & the remote start wouldn't work from the office--kinda useless.
I have only had my truck a few days and have a problem with the remote start.
It worked great for the first few days, but now this.
This morning i was in the house and tried to remote start. Lock, then the 2x button 2 times. truck beeped at me. So i did it again and again. Nothing but the truck honking at me. So i tried, unlock, lock 2x. Still honked at me.
THen i went out in the cold 5 ft from the truck and it did the same thing. so i climbed in started the truck manually, then shut it off , got out locked the doors. Then i did the lock, 2x two times and the truck fired up.
Bought the 2011 F150 Lariat used, no window sticker shows online, got a build printout from the Ford parts man. According to the build, it says "with remote srart".
Got one key and separate fob with the truck....just a black key, not the remote key. Had a second black key made at dealers expense and kept one remote from the trade in. All works well but.....Would like to have the remote start functional.
Dealer says buy the key, $140, plus cut and program. Lock shop says $190 for it all.
My question is if I buy the key and have it cut, can I program it properly in the truck....including remote start.....since I have two regular coded keys?
My wife had the single button Ford remote start installed by the dealer on her '09 F-150 about a month ago. Ever since, the dome light in the truck doesn't turn on when a door is opened, doors unlocked, etc., but I can still manually turn it on by moving the slider. Is this normal or did they screw something up on install? If it's normal, why?
View 2 RepliesWhat should my idle speed be ? 2010 F150 4.6 2v, 4spd auto. Did not see anything under the hood on the stickers, maybe I missed it.
View 14 RepliesI just bought a 2010 f150 and it came with the single button remote start. I've been reading lots of posts about remote start but none with my issue. Mine when you push the button the horn beeps, ignition comes on, the seat slides forward, then the horn beeps just one time again, and it just sits there with the radio playing and not running. Everyone else is getting a 3 beep error code and I'm getting just the one beep.
View 10 RepliesWe have a 2012 Ford Flex with remote start. Remote start doesn't seem to work when car is on an incline. Backed car into driveway and started but won't when pulled in. Is this common Remote start is separate key fob.Remote start is factory.
View 6 RepliesGot a '13 FX4, sometimes my remote start works and sometimes the horn just beeps when I go through the sequence.
Am I doing something wrong, leaving a door not shut all the way etc.... Are there any parimiters where it won't remote start and just "beep" the horn?
I just had a Viper 5704 2 way paging remote start alarm installed on my 2012 Fx4 Ecoboost and when the installer ran the wires from the inside of the cab through the firewall he went through the hole that the rubber grommet was in just to the left of the brake pedal. Instead of going through the grommet/plug, he pulled it out and ran the wires beside it and now the rubber plug will not seal and I can hear turbo/engine noise in the cab. Has alarm installed on a 2010 or newer F150 with this same layout and if so where did the installer run the wires through the firewall? Should I have them pull the wires out and run them through the center of the grommet like they should have done or have them make a slit in the rubber from the edge to the center (radius cut) and make the best seal possible?
View 14 RepliesSo I have had my Platinum for a year now and really love it but there are two things that drive me nuts. First is the range of the romote start, which is the factory installed version. There is no range you pretty much have to right next to the truck for it to work so what is the point? Any way to increase the range?
Second is the audio system, I have the in-dash NAV/Sync system. I use my iPod pretty much all the time. I have it hooked up via USB. Now sometimes when I am listeng to it while driving the turn off the truck do something get back in and stert the truck the iPod does not play, I have to go to the NAV screen and push the USB icon and then it will start to play, other time I just start the truck and it play automatically. I have my system to play automatically but that is not always the case.
My 2000 excursion will not enter the program mode to allow me to program 2 new remote fobs. A couple of years ago I successfully programmed two remotes and it was easy. One broke so I thought well I will buy 2 more. I have tried the procedure over 100 times and I can not make it work. Followed instructions to a tee that came with the fobs and also the procedure in owners manual. Is there a relay that could be bad? I can use the door number code and my last key fob still works fine. I have disconnected the battery, both cables, held them together for 1 minute and left them off for 1/2 hour. Still no luck.
View 13 RepliesBeen all over the internet and have tried over a half a dozen or so different methods for programing a key but none have worked for me. I have already gotten the key cut at a locksmith, I just need to program it successfully.
View 7 Replies