Ford F-150 (2004-2008) :: Wheel Bearing - Hard To Turn One Direction
Jun 2, 2011
Have a wheel bearing going south can it make the car hard to turn one direction. I dont really have any humming like a wheel bearing does. But i feel a little resistance every now and then when turning the steering right. I have sprayed the steering shaft joints and i can see that they are moving free like they should. And i have a less than 2 yr old steering rack. My truck has 103k miles on the original (to my knowledge) bearings. i didn't know if sometimes a wheel bearing could cause a hard to turn in one direction feel.
View 14 Replies
Advertisement
What is causing the right front wheel bearing to keep going bad on my 06 f-150 2 wheel drive....
View 1 Replies
Repeat Front Hub Failures -- 2WD Try this situation -- Purchased 2006 F-150 XL with 57,000 miles. Truck built on 05/24/2006.
Sept 2011 68,621 miles -- Left front hub failure -- Wheel bearing grinding -- Done by Bell Ford in Phoenix.
2013 -- Left front hub failure -- wheel bearing grinding -- done by independent shop.
Sept 2014 -- Left front hub failure -- wheel bearing grinding -- done by independent shop.
Sept 2016 -- Upper & lower control arms, struts, strut mounts, springs replaced -- Quality part used -- Complete front end alignment -- Brake job front and rear.
Nov 2016 -- New performance exhaust system due to exhaust leaks.
Dec 2016 -- Failed automatic transmission -- Remanufactured FORD transmission installed w/ 36 mo warranty. Sanderson Ford gets an A+
March 16, 2017 151,000 miles -- Left front hub failure -- wheel bearing grinding! Verified by jacking up truck and spinning left front wheel -- GRIND! This is coming from down in the hub. This is a 2 wheel drive truck. Yes, you counted correctly, this will be the 4th replacement on the Left side!
NO Towing! NO Overloading! Wheels are 2006 XLT style Aluminum rims with P235/70R17 Michelin XLT M/S (Defender LTX) tires all around.
It only hauls maybe 200 to 300 pounds of electronic equipment at the max, once in a while. This is driving me crazy! I always use FORD PARTS for the HUB ASSEMBLIES. Really loosing faith, the front right hub is OEM original - NEVER CHANGED!
View 7 Replies
I just replaced my drivers side wheel bearing that was squealing pretty bad. After replacing it I now have the same noise only consistent where before it was only when I turned the wheel to the right. I noticed the teeth in the cv shaft where a little warn down when I changed the hub. Now also along with that noise I'm getting a clunking sound. Should I just change the cv shaft or is there something else I need to be looking at?
View 1 Replies
I have a 2004 F150 SCrew 4x4 with the 4.6 (260K)... My steering wheel occasionally 'clicks' when turning - It sounds and feels like a bearing is bad in the steering column.
When it happens, it feels like one in the bearing is binding- the steering wheel slightly binds, then there's a 'pop' like the ball snapped back into place. This only happens occasionally. Sometimes it will pop with every revolution of the steering wheel, other times not at all.
Originally, I thought it was a U-joint, but it seems like the noise is coming from the bottom of the column...
View 1 Replies
The front driver's side wheel of my 2007 Ext. Cab makes a speed-related "ticking" sound. It's usually audible but not always there. I look for rocks in the tread of my BFG All-Terrains and sometimes I find some, sometimes not. The noise seems to be independent although some of the rocks really get up in there. Sometimes its really loud and it sounds like a rock. Bearing? 4WD CV or U-Joints or whatever?
View 6 Replies
I may, or may not have had to jump a curb at 40 mph to avoid rear ending another car. Truck is a 2003 F-150, single cab stx package, 4.2ltr. Long story short, no damage to my passenger side front tire or rim that I can see, but I do have a horrible grinding noise when I turn the wheel either direction. The truck still turns properly, power steering fluid is level. What should I start replacing first?! She's got about 90k miles on it, I'm sure a lot of the suspension parts are due, just need to know where to start!
View 3 Replies
I have 2010 f150 when I turn my steering wheel all the way in one direction and I press the gas from a dead stop like at a stop sign it makes sound like metal rubbing together slit vibration with shaking(like the back wheels having a hard time keeping up) from the back end. i took it to a shop they look at it. They took apart the transfer case and re-lubed what was in side told me it should go away in a couple of days. I live in winter climate when it's below freezing it works no problem without any sounds.
View 1 Replies
my 1992 BMW 3-series makes a horrible noise when I turn the wheel sharply in either direction. the noise however gets better as the car warms up, and after half an hour of driving has gone away. if I turn the engine off for an hour and start it up again, the noise is back. my sister think it's the steering column. my brother-in-law thinks it's the power steering pump, or some kind of really complicated switch to do with RPM that I don't understand.
View 1 Replies
2007 F250 4WD 5.4l ... when I turn sharply in either direction I am getting a light clunk sound similar to when you are in 4WD on blacktop and try turning. The engine also seems to wanna stall when I cut the wheel too sharp.
View 4 Replies
So, I now have just under 20,000 km on my Accent, and lately there have been some noises popping up. I'm wondering if they're normal or not.
1. At low speed or completely stopped, when I turn the wheel about halfway in either direction I hear a popping noise. It sounds like it's coming from the steering column, but I'm not completely sure. I just began noticing it a couple days ago. So far it only seems to happen after the engine has warmed up; doesn't happen right after a cold start.
2. After the engine has warmed up, I also hear a knocking noise coming from underneath the car. It happens only at low speeds or when stopped. It seems to be directly related to the engine RPM.
When it idles around ~700 it will knock once. If I keep it in neutral and press the gas, it'll knock again. Let it idle, knock. Apply gas, knock. It also happens when in gear. I think it's either the fuel or exhaust system. Maybe it's the sound of the in-tank fuel pump turning on and off? It sounds the same regardless of how much fuel is in the tank.
This has been going on for a couple months now, and there don't seem to be any ill effects related to it... yet.
3. This isn't a noise, but a smell. Since it's summer here now I've been using the A/C quite often. While it's running it's ok, but when I turn it off it smells like a wet basement for a while.
I'm thinking that maybe the evaporator isn't draining properly and mold is growing in there. If I turn the blower on high right after turning off the A/C sometimes little water droplets will come out. I should also mention that it's very humid here at this time of year.
View 8 Replies
I bought a 2010 lexus ls460l awd with about 80,00 miles on it and also bought a warranty for 3 year/ 36,000 miles. After having the car for a couple of days i noticed things that I didn't like as well as figured weren't normal, alot of it had to do with noises, the dealer told me they didn't cover noises, and i asked if those noises meant something was wrong then what?? It was mostly squeaks and rattles that I didn't expect to hear in a car of this caliber, going over uneven road there's a constant squeak coming from the front, if its a bump its an extremely hard thump in the rear, and the idle.....is BY FAR the loudest I've ever heard in any car that I've been in.
When I turned the wheel all the way in either direction and pressed the gas, it made a rubbing noise with a harsh vibration, brakes squeak horribly about 2 days out of the week for about an hour then it goes away. When i took it in they said everything was fine except a part on the rear struts and said they needed some special oil for the vibrating rubbing issue. Picked up the car and noticed the vibrating issue was resolved but during the drive home noticed everything else stayed the same.
View 4 Replies
Have an 04 ford f-150. igntion getting hard to turn of. not all of the time but still has its moments. thinking of using some graphite to lube it up.
View 2 Replies
I turn my steering wheel while the truck was off and in park and now I can't get the key to move and start the truck nor can I get the steering wheel to move. What have I done and how can I fix it?
View 7 Replies
I just installed my 2.5" leveling kit. The drivers side went really easy. The passenger side was VERY difficult getting the strut back in without a spring compressor. I got it though after some prying.
Now when I drive straight down the road, she does great. When I turn left, she does fine. When I turn right, it feels like the wheel is wobbling off.
Most of what I have read, people are having wobbles at 60+ MPH. Mine does this at any speed.
What did I do wrong? What is wrong with the truck? Does the leveling kit need to go? What can I do to fix this.
View 13 Replies
I bought 2006 Prius which clearly was involved in accident, though it was small collision in slow traffic but on my way home from seller it was clear this was something more serious when on motorway at 70mph steering wheel started vibrating when in straight direction, it disappeared on any little turn left or right. Ok, maybe just ball joint got loose.... but not, today I've lifted front and found little knocking sound in few positions when turning the wheels (L-R). Sound is coming from rack & pinion unit. Anyone removed, disassembled and successfully assembled it? My plan is to check with dealer what is the cost of replacement (quite expensive for gen I, expect it to be same for gen II) alternatively can get one from scrap yard but need to find the calibration procedure first. BTW did read codes as follow, it's clear after reset... so far.
View 5 Replies
I have a 2005 Ford F-150 with a 5.4L V8 engine. Few months ago I started getting this squeaking noise coming from the front tires when I turn the wheel. I took it to the mechanic and he said the ball joints need to be replaced. Do you think it's the only reason why this is happening? If not, what else? The noise is pretty bad and the ball joints have never been replaced before.
View 1 Replies
I have a 2004 4x4, 5.4l auto. the truck sits a lot during the summer due to me riding the motorcycle instead. After sitting for nearly 3 weeks, I fired it up and went to pull out of the driveway. I notice right away that the steering wheel was a lot harder to turn than usual. I've jacked the truck up and took the weight off the front tires, it turns back and forth like normal. when the weight is back on it, it's hard to turn again. I've checked the power steering fluid and its at the full level. I hear no noises coming from the pump. Am I looking at needing to replace the rack and pinion or is there possibly another issue that can be causing this.
View 1 Replies
I noticed an increasingly loud noise when my GX 470 is in motion. It isn't tied to engine speed, so I figure it probably has something to do with the wheels.
I jacked up the vehicle and spun each wheel independently in neutral. Front wheels were fine. Rear driver's wheel was fine. Rear passenger's wheel - fine with parking brake disengaged. But with brake engaged, you can spin the wheel backward but not forward.
View 2 Replies
I have a 2004 Saab 9-3. Currently the Battery Warning Light has come on. It came on while the car was being driven. The car's performance seemed to suffer and it was hard to turn the steering wheel. We were about two miles away from home and we somehow managed to get home but we simply couldn't get the car to turn on to our driveway because of loss of power for steering.
We checked the Saab manual and it reads : Warning Charging - This light comes on together with 'triangle/exclamation' light if the battery is not charging. If it comes on while you are driving, stop the car as soon as possible and switch off the engine.Check the alternator drive belt. If the belt has broken, the engine may overheat (cooling system will not function properly), the battery will not be charged, the A/C compressor will not run and power assistance for steering will be lost.
Our observation:- We experienced the a/c not working too well- We had problem with steering - It was almost as if the steering wheel was locked. It was extremely hard to turn. Is this an alternator belt or a battery issue? If so, how do we figure out?
View 6 Replies
Runs into a problem with steering wheel not wanting to return back to straight after a turn...spray wd40 on u joints on steering shaft ( under hood)....
View 2 Replies
