Do the later model F150 retractable step tailgates would fit a 2004 F150 Fx4 Bed, or has the rear part of the bed been changed in design, so as to make this not possible (by progression, not necessarily intention).
View 1 RepliesWhat's up with the little nub hanging off the tailgate?
View 5 RepliesI have a 2004 F150 Fx4 and i just locked the tailgate for the first time and now i cannot unlock it. I turned it clockwise to lock it and I am trying to turn it counter clockwise to unlock it and it seems like its putting too much tension on the key.... Am I doing something wrong?
View 7 RepliesJust bought a 2006 f150, the tailgate hinge seems to be rusted to the cup(drivers side). Any tips for repairing/ getting it freed up?
View 5 RepliesSo I'm having a tailgate issue. When I open my tailgate, sometimes the internal spring wants to keep it up, rather then letting it open down. It also makes an odd popping noise during operation from time to time......I don't see or feel anything broke in it.
View 7 RepliesWell heck, the PO of the truck I just bought has lost the spare key to the ignition, and the key that opens the tailgate and unlocks the spare tire. First question, is the key to the tailgate and spare tire the same key or are they different?
Second question, is there any simple way to have new keys cut for these things?
I have a 2006 F-15 XLT with a bed cover, tailgate cover and separate tailgate cap. The cap has cheap plastic clips that went into the tailgate but have broken off...this is a problem as I have a tonneau cover that is a tight fit. Every time I close the tailgate with the cover on, I have to jam the cap down and hope it is far enough by the time the tailgate closes.
2 Questions:
1) Where can I buy a reasonable replacement?
2) Is there a good solution to just repair? I tried JB Weld, but that did not seem to hold (surprisingly)
My ford escape tailgate switch stopped working, the glass worked fine and opened with the switch. I ruled out the fuse as both I believe work off the same fuse. I removed the back panel to access the mechanism and found that, I could get the tailgate to work if I disconnected the wire from the glass tailgate switch and as the wire connector (shown In picture) was reinserted it would energize the tailgate switch and I am able to open the tailgate. What the actual problem is. I initially thought that it could be the tailgate switch itself but having seen what is happening I really am at a loss to what is the problem....
View 1 RepliesI have a 2008 F250 that the tailgate has always been real easy to open and close until the other day I could not get it to latch so i slammed it and it did latch and it worked a few days but now it won't latch at all. I can open and close the latch with the tailgate down but nothing I do will make it latch in place. I've tried spraying with PB blaster it didn't work. Not sure if its out of adjustment or what.
View 2 RepliesOdd thing happened. All of a sudden the factory emblem on my 2008 tailgate totally lost all of its blue and is now pure chrome. Happened just like that.
Anyway, is it screwed on and do I need to pull the panel on the tailgate to remove it? Here's the tailgate on my truck for reference.
I tried to take my tailgate off my 08 F-450 today.
Did it the same as every tailgate Ive taken off in the last 20 years...........it wouldn't come.
Is there a trick to it?
I just got a 2011 LX 570. The power rear door/tailgate opens just fine when pressing the button inside the car, or on the key fob. And closing it works fine as well from there as well as from the button on the door. However, when I press the larger "unlock" button on the tailgate itself, it does not open by itself. I have to manually open it.
I've read in a couple of places that this is a setting that the dealer must changed...IE to make that large unlock button also open the tailgate by itself instead of having to manually open it.
I just had the bed and tailgate on my 2004 replaced with a 2015. The body shop took my old lock cylinder out to put in the new tailgate. The old tailgate is only a year old and I wanted to sell it. The issue is that the latch will not open the tailgate. I can manually unlatch it by pulling the rods. Does the lock cylinder not being installed somehow affect this and need to be installed for it to function properly or do the rods simply need to be adjusted?
View 4 RepliesWhen I open my tailgate with the power opener, it rises almost to the top and then starts beeping and closes.
View 7 RepliesMy dad's 2010 F150 is making some funny noises when you open the tailgate. What was the cause? Seems like something is going awry with the torsion bar.
2010 F150 tailgate noise - YouTube...
Last week I had to replace my tailgate handle while in the middle of moving. It was nice that it was easy, but it was a major hassle in the middle of a move! In light of having to do this, I was wondering if there are locking handles available, and if so what might you recommend?
View 4 RepliesLooking putting on a Putco lightbar on my 2014 Supercrew. It seems I don't have a good surface on the right side the sheet metal has some type to bulge and a rectangle hole.
View 14 RepliesJust bought 1998 F150 XLT and will probably have ongoing questions. Here's one....
Is there supposed to be a separate key for the factory tailgate lock? I tried the ignition/door key but it doesn't seem to work.
Either I am missing a key, the lock is jammed from lack of use, or I have a different tailgate than the original. Tailgate looks origin
My 2003 tailgate locks by itself sometimes, has been just annoying, but today I can't unlock it. It has no electronic lock. What to do?
View 9 RepliesI have noticed that the tailgate doesn't sit level when opened, the cables are too short for it to horizontal. The rear of the gate is 1-1/2" higher than the front. The cables need to be about a 1/2" longer for it to sit right.
View 14 Replies2003 Explorer Sport, 4X4, keyless entry. Bought the truck brand new but never had occasion to use the keys in the door and tailgate locks. Tried them this week and they did not work the locks. I first thought that the locks were frozen. Not the case. Stopped by the dealer and he suggested spraying WD40 in the locks. Didn't work. Got a new 'blank' cut by the dealer in case the key was worn, didn't work. What might be the issue? I was thinking that the wrong cylinders were put in the truck on the assembly line. I have a key fob remote and keyless entry but it would be nice if the key unlocked the doors in an emergency.
View 6 Replies