Ford F-150 (2004-2008) :: Puddle Light Bulb Replacement
Nov 9, 2010
So I finally figured out how to get the puddle lights out of my factory tow mirrors. I want to replace the bulbs with LEDs.
But how do I take this apart? Looks like the clear plastic lens is superglued.
View 14 Replies
How to change out the bulb(s) for the overhead console map lights. The lights that you push on / off. Since the owners manual doesn't cover bulb replacemnet for that.
View 14 Replies
I just replaced (or almost replaced) the bulb on the passenger side of my 2008 prius. It is a HID bulb. I got the old one out, the new one in and connected and verified it is working. Now trying to get the cover back on that provides the weather proofing and unless im wrong... the braided wire that connects to the back of the bulb is in the way. It looks like it has to go thru the opening that the cover is supposed to seal... Imagine a rope hanging over the edge of a bucket you are trying to put a cover on... Am i wrong here? did I miss something?
View 1 Replies
Lexus IS: How to Replace Your Tail Light Assembly
Step by step instructions for do-it-yourself repairs
Browse all: Lexus IS Lighting Guides
View 7 Replies
I wanted to replace the bulbs in my map light but ran into some problems. I was able to remove the first see-through plastic cover on the light. Also I was able to twist one of the bulbs out of the socket so it was loose but there didn't seem to be a way to pull the bulbs out of their metal holders. I tried with medium to light pressure on the right side bulb and it slipped from my fingers and jumped back into the area on the other side of the metal holders. Now I can't see it or reach it. What do I need to remove to retrieve the bulb and how do I remove it?
View 6 Replies
i need to know if i can remove the light bulb for the flat tire light, it has gotten colder here in Phoenix, AZ and i dont need the damn bulb on. can i remove the bulb and call it good?.
View 6 Replies
The passenger side HID bulb of my 2005 RX330 need to be replaced, how to? Also there is condensed water in the assembly. I am going to replace it later. Where are other screws beside two on the top?
View 14 Replies
2004 F-150 XLT, 3rd brake light bulb has blown and the bulb holder is brittle and the clip that holds the bulb in the holder on each side have broken off. Is there a way I can replace the holder itself or do I have to buy a whole new 3rd brake light wire harness?
View 5 Replies
Using LED replacement bulbs? I have a 2008 super duty. Want to upgrade lighting.
View 14 Replies
Looking for information as to which LED is the correct replacement to the factory bulb for the side mirrors on a 2014 IS250?
View 6 Replies
I just finished replacing the instrument panel light bulbs on my 1997 Ranger XL, 2.3L, 2WD pickup. I wanted to share how I did this. First of all, if you never have done this before, go slow and take your time removing the dash panels as they are plastic molding and break easily. Allow yourself about an hour to complete the task. You will need smaller sized hand sockets to remove the screws. The very first thing you should do is remove the negative battery cable from the battery. This way you will not risk shorting out anything electrical as well as possibly triggering the airbag in the steering wheel column.
The key piece in starting the process is to remove the radio first and then central console panel that houses the radio. It pops out very easily by gently prying it out in the four corners. Once you get that piece out remove the screws the support the lower knee panel. In order to get that piece off you will have to remove the two screws the hold the hood release lever in place. Get under the dashboard and look up as you lay looking upward near the brake pedal. Pull the hood release lever and you will see the two gold screws. Remove them. This will free up the panel on the under side. The top side of the panel will pop out if you pry it gently on the top two corners.
Next, you will see a metal panel underneath the knee panel. Remove this metal panel as well. Now you will be able to remove the instrument cluster panel piece. There are some visible screws holding this in place, remove them and gently pry the cluster panel out. Once the cluster panel cover is out you will have to actually remove the gauge cluster itself by removing the the four screw bolts that secure it in place. After the screws are out, gently work it out of the dash slowly as you will need to disconnect three electric plug harnesses in the back.
After it is unplugged and out, on the backside of the instrument cluster you will see some round, black colored thumb screw bulb housings that house the light bulb. Just twist them and turn making sure to go in the right direction. Feel it out for the direction, I cannot remember which way it turns. The bulb housings are labeled "ILL" on the circuit overlay. I recommend you replace all the bulbs as you might not want to have to do this again in the near future. Once all the bulbs are tightly seated and installed just reverse the above process for installation. This is a fairly easy job and like I said it takes about an hour. Make sure you test the lights after finishing.
View 10 Replies
How to change my map light bulbs over the front seat of my new (to me) 2010 F250 King Ranch with a sunroof. I have tried to remove the whole assembly with a plastic trim tool with no success. I have pulled as hard as I dare and figure there must be a procedure I am missing. It appears to me that the whole assembly has to be pulled down.
View 6 Replies
How to access the plugin for the 3rd brake light, cant seem to find it from the top, do I need to remove the headliner?
View 2 Replies
I can't seem to find a DIY on our generation RX to replace the fog light bulbs.
How did you do it? Under the front bumper, or pulling back the wheel well covers?
View 3 Replies
How to replace the fog light bulbs? I have a 2016 and would like to install LED bulbs.
View 3 Replies
I have a 2001 F250 Crew Cab with Powerstroke. The dash lights are starting to go out one at a time. How do I get to and replace the bulbs?
View 14 Replies
How to remove the orange cover to replace the bulb in the driver side mirror - tried but worried I'm going to break it...
View 2 Replies
While I was replacing courtesy light bulb, i got VSC light in my 2010 Prius. It doesn't go off. What can be the reason?
View 6 Replies
How to easily remove the old one to install new bulb?
View 11 Replies
My wife has a 2012 Avalon Limited. I also see that it comes with a side marker light as well. What is the bulb for the side marker light and how to replace it as well.
View 3 Replies
I was wondering, what the replacement bulb for the reverse light on the 2014 is250 f sport was..
View 1 Replies