Ford F-150 (2004-2008) :: Muffled Squealing From Tranny
Aug 5, 2014
Some what sounds to be metal-on-metal squealing seems to be getting worse. It's coming from the tranny only when it's not torque-converter locked and varies with tranny speed, not necessarily rpms.
Slippage? Signs of some serious problems?
Truck has 90K on it. I don't tow. I changed the tranny fluid about 60K ago. I just checked the fluid on the dipstick tonight and it's still light pink and clear, but I have not dropped the pan to see what's inside yet. No codes and the truck drives perfectly well otherwise.
View 4 Replies
Advertisement
I have a 2005 F150, 5.4L. What I have is a "muffled" sound (for the lack of better terms) from the engine when driving. Also it seems to be "starved" or lacking some power.
View 3 Replies
Well this weekend I'm doing quite a bit of work to the truck. My tires and exhaust got delivered last night, now I'm just waiting on the leveling kit. Here's my issue:
For a little while now (5k-ish miles) going in and out of overdrive the tranny makes a clunk noise during the shift. Time to change the tranny fluid and filter? I am making a trip up north on Sunday and don't want to have the tranny the bed on the way.
On saturday I am doing the leveling kit (2"), brakes, exhaust (MBRP), and new tires (325/60r20 Terra Grapplers). Should I go ahead and do the tranny fluid and filter while I'm at it, or just wait till I get back. I am figuring on about 2k miles throughout the trip.
View 2 Replies
Let me first say that my knowledge about vehicles is nearly non existent. Yesterday I was stopped at a light on a hill. When I pulled away up the hill it felt like the tranny was slipping real bad. I coasted into a gas station and stopped. I gave it the once over look around to see if I could see anything unusual. All looked ok, so I wondered if maybe it wasn't all the way into gear or something.
I limped it home only 2 miles and it was seemingly normal although I was real gentle and it was all flat or downhill. Later that night I drove it around the block and it was shuddering and banging and seemed to be slipping again. My question is doesn't the transmission usually go over time, or does it fail suddenly like this. Could it be something else? And lastly what does a rebuild cost. Truck is 06 FX4 54000 miles 3.73 gears. Edge Evolution on level 2.
I tow a Trailer a few times a year 7000 lbs fully loaded, if I do need a new tranny should I replace to a different gear.
View 5 Replies
04 F-150 2WD 5.4L AUTO Extended cab
I had my tranny rebuilt under warranty at about 70K and I'm now at 167K. When it was rebuilt (by Ford) it still had a slip feel when I picked it up. Rode the mechanic around the yard and he felt it. Dead stop and take off while turning. Like from a stop sign. He took it back and found a sensor/module/something that was the culprit. Seems I remember they found it with a computer? Is there a computer/reader that will diagnose a tranny?
View 9 Replies
I have a F-150 5.4 automattic 07 model and I need to add some tranny oil,I can't see on dipstick or in book what oil I need,(4) (5)??? I still can't see any markings on dipstick, where would I see a 4 or 5 on dipstick??
View 2 Replies
I have an 07 f150 base model truck, manual 4x4 no push button. It seems something is binding in the hub once in awhile. I am driving down the road and all of a sudden i hear a loud squealing from the front drivers side. I slow down and then something seems to engage when I am almost stopped. I did a little research and have come up with the actuator might be bad. I just don't wanna throw parts at it that it don't need. Here's a lil more info. Last winter I put it in 4 wheel drive and the passenger side was making the same noise with the 4x4 not working when I hit the gas. I am thinking actuators need replacing on both sides.
View 5 Replies
When I set the locks and alarm after driving with the AC on, the horn sounds muffled. If the AC was not on, it sounds normal. I am curious, should I expect this to come back? Is it a sign of a problem I need to concern myself with?
I suspect it's the battery, and just had it replaced today because the dealer said it was functional, but holding less of a charge than it should.
View 4 Replies
I just replaced my drivers side wheel bearing that was squealing pretty bad. After replacing it I now have the same noise only consistent where before it was only when I turned the wheel to the right. I noticed the teeth in the cv shaft where a little warn down when I changed the hub. Now also along with that noise I'm getting a clunking sound. Should I just change the cv shaft or is there something else I need to be looking at?
View 1 Replies
I went for a tour with my truck and everything was fine, 5 minutes before getting home I heard a squealing coming from under the hood, I then lost all my gauges inside the truck. The truck didn't shut off so I drove it home. when I shut it off I tried restarting it and it wouldn't even roll over. I tried boosting it and it still won't even crank over.
View 1 Replies
My 05 Supercrew 4X4 with 172k miles started making a horrible noise these last couple days. It sounds like its coming from the front passenger side area. The best I can describe is that it sounds like an electric tool motor with bad bearings. I'll be driving along at 45mph or above and every now and then I'll hear a really bad bearing squeal. It's bad enough that I can feel the extra friction caused by the squeal start to slow my truck down. It's vehicle speed related. I know what a bad wheel bearing sounds like and this is nothing like that. It's gotten bad enough I'm nervous to drive anywhere.
View 4 Replies
I have a older minimax with the latest updates and have noticed that under full acceleration the tranny seems to rev up faster than the truck is accelerating. This occurs i think in 3rd gear like accelerating onto a on ramp etc. Kinda like its slipping if you know what I mean. I'm running the mild tunes in tow mode. Everything else seems ok.
View 7 Replies
I just replaced the cv joint, the wheel bearings, and the tie rod end on my passenger front side hoping this would fix the problem. It fixed some of the issues but while driving straight when I go over bumps there is a muffled knocking sound coming from that area and my steering becomes loose and jerky. I'm just learning how to work on my cars on my own.
View 4 Replies
Looking at buying a new truck. We'll in a crunch actually due to my tranny going out this morning. One that I'm looking at looks great, except the obd2 port is dead. Where do I start looking? What fuse etc. It appears auto correct changed the obd2 to body and I didn't catch it...
View 8 Replies
I was pulling our 14k fiver home after a weekend at the lake and I heard a muffled pop sound. About a minute prior I had checked the gauges and everything was normal. It honestly sounded like a chinabomb tire on the ttrailer had popped. Puled over and all tires were good so I popped the hood .....
Here's the bottom half. Is this possibly a warranty item? 2011 with 61k. And no mods. Plus a lot of oil on everything is that normal?
View 14 Replies
My girlfriend each week has to add at least a quart of tranny fluid. There are no apparent spots on the garage floor. The problem started last week when the engine light came on and she found herself sitting on the side of the road with her daughters in Nevada's 100+ heat.
I don't understand where the fluid could be going unless it leaks out when she is driving... but you would think that when she parks it, some would still drip off onto the floor and this is not the case.
View 8 Replies
Very strange issue today. While driving in stop and go traffic (Auto Sport Mode). I noticed the car was starting in 2nd gear. Next stop I switched over to M and it would still not downshift to 1st even with the paddles or shifter. Once I started moving I could manually downshift just fine. Car seemed to shift normal. Eventually got the VSC / CEL . Here are the codes:
Pending:
PO301 - CYL 1 Misfire
C3101 - no details
C3411 - no details
C3000 - no details
Historical:
P0A11 - DC/DC Converter Enable circuit open
All of the codes cleared and did not reappear while idling. I have not driven the car yet. It also goes back into 1st now while stopped although I haven't tested coming to a stop. Will do that tomorrow
One thing to note that was out of the ordinary today. For some reason I was absolutely freezing (which should be impossible this time of year in SC) so I turned the AC off before this started and the idle dropped very low (400 - 500) which I seem to remember being normal but I almost never run with my AC compressor off unless I'm in race mode and I'm usually not putting along in stop and go traffic if that is the case. Not sure if this has anything to do with it but perhaps the low idle caused a voltage issue which tripped the codes.
View 2 Replies
I have a 2004 Ford Escape Limited. There is a squealing noise when I accelerate from a complete stop. It's not there constantly, and seems to have started when I started using the AC. When I had my oil changed tonight at a Tires Plus, I asked them to listen, and the mechanic thought it was a valve related issue since it's not a constant noise. He only got it to squeal by hitting the gas really hard. He said to take it to a dealer...which is super expensive!
View 11 Replies
I was driving home from Las Vegas and my avalon just randomly slipped out of gear. I pulled over and put in into park and back into drive and it started to roll backwards the fluid is full and clean.... I bought this car 6 months ago and it barely hit 90xxx miles...
View 7 Replies
Having issues with transmission fluid spewing out the dipstick hole? Truck is an 04 Escape and has worked great until I had a rear manifold leaking. I took the truck to our mechanic and he replaced the rear manifold cat converter. He broke 3 of the 4 bolts so he told me he had to roll the engine forward to gain access to tap out the broken bolts. Im sure he took the throttle body and intake off for more room. I Got the truck back and noticed transmission fluid all over my driveway the next day. I contacted the mechanic and he states it was nothing he did and cannot figure why this is happening. Basically told me to fly a kite!
View 14 Replies
when i initially purchased "used " my 08 gs350 i had a problem with brake squeal. I kept taking it in to the dealer until they ended up changing front rotors , all 4 pads , and new shims .
Took my car into my usual mechanic to get an oil change. I knew i needed brake pads and he changed all four pads out for $350 .I am having a terrible time with brake squeal now. the mechanic is telling me that i have warped rotors and need to replace all four. He is telling me that he wont charge me labor, but the parts will cost $400.00 I goggled the cost of the parts and he isnt far off on the price . My concern is that his fix isnt the correct fix. Front what i can tell its the front rotors making all the racket.
What should i do ??I dont know if they re-installed the shims and have no idea what kind of pads were used . Thinking about taking it to the dealership and being done with it .
View 3 Replies
