Ford F-150 (2004-2008) :: Major Dragging And Rubbing Noise In 4WD When Turning
Jan 4, 2013
I've looked at several threads but no one describes my exact problem. The issue started suddenly. When I am in 4WD and turn (does not have to be sharp) there is a dragging and rubbing noise. It drags hard enough that it will stop the truck.
Sounds like the brakes engaging and rubbing. I can not see any foreign material wrapped up anywhere. The 4WD appears to be engaging properly and the IWE appear to be working. I can "stomp on it" in a straight line and throw mud with no crazy noises and get a rooster tail from the front end.
I've got about 15000 on new brakes and rotors. Ceramic pads and lifetime rotors all the way around.
View 8 Replies
Advertisement
I've got a new issue that is happening on the front end of my truck. Whenever I try turning my wheel while driving, I get this rubbing/grinding noise coming from the front of my truck. It only happens when the wheels are in motion. It seems to happen less when I'm driving at higher speeds, but I can notice it make the sound at any speed. I tried driving it slowly in an empty parking lot while turning and it's definitely making the sound every time the tires rotate.
I took it in for an alignment because this was happening every time I drove, whether it be driving straight or making a turn. Now that my alignment has been fixed, it no longer make this noise if I am driving in a straight line, so it only seems to happen when I'm turning. I had the mechanic check to see if they could reproduce the issue. The mechanic was able to hear what I hear, but when he put it on the lift at the shop, he was not able to reproduce the sound.
View 6 Replies
I have a 2004 F-150 STX 2WD with a 2.5" leveling kit on it. I recently have noticed a rubbing sound that can be felt in the steering wheel and gas pedal the instant you turn right. I just replaced both hub assemblies and I just really don't know what it could be. It doesn't happen when you turn left or go straight and there should be no reason as to why my tires rub, because they haven't before. I got my truck aligned and they checked my joints and everything and said that it was fine....
View 13 Replies
I put a link below on the video that I made. But when I come across 1,000 RPMs weather I turn, go straight, left or right it makes this noise like a humming or rubbing noise. I took it to the dealership and they fed me crap saying when it gets worse or when it happens every time brig it back.
[URL] ....
I don't think this link is working I'm trying to figure out this iPhone. Search my YouTube channel Kill3rcr3w that's the channel I just uploaded it
View 2 Replies
2006 F150, 4.6 V8 ... My truck was running fine until one morning I was sitting in the truck giving it my customary 30 second morning warm-up and it starting running very rough and quickly threw Check Engine LED.
I hooked up my laptop and got the following error codes: (To assist with future searches, the error codes are P0302, P0303, and P0353)
It seemed to drive fairly well, but low RPM torque causes major shuddering, so I try to keep the revs up to avoid damaging other components. The first step was to replace the spark plugs. They looked to be original and I'm at 140K on the truck, so it's probably time.
I went with Bosch Platinum as the factory plugs were platinum. When replacing the plugs, I moved the coil pack from cylinder 2 to cylinder 3 to determine if the problem would move. After the plug swap, the engine did run noticeably smoother (so the plugs worked overall), but still had the low rpm shudders and the same error codes (after clearing them).
Unfortunately, the error codes still indicate cylinder 2. I guess a misfire could be related to the fuel injector as well, not firing at the right time or not a complete spray, but what else could cause this?
View 11 Replies
I have an 06 with a 5.4 with 70k on it and I have already had to do the exhaust manifolds twice, once covered by warrantee at 19k, then again around 40k and now at 74k I have a major leak from the left side manifold again
View 1 Replies
The last two days after driving home i noticed a smell upon exiting the truck. today i figured out what it was, the left front wheel was smoking. i.e. i believe the brake is dragging. the weird thing is going to work no issue, coming home issue. big difference is yesterday coming home was about 90, today 95. in the morning yesterday it was 60 today 74.
Is it possible the hot temp is causing some kind of an issue? it just started getting hot here and this had never happened before.
Truck is an 05 4X4 Lariat SuperCab with 70K. did brakes ( rotors with angled coolng fins up front ) and pads at around 40K. i just rotated teh tires about 1500 mile ago and there was plenty of pad, inner and outer.
View 2 Replies
I have a 2004 xlt xtracab F150 and for the last week my drivers side brake has been dragging and the first time it happened it got REAL HOT and after I let it cool down it did release and then 2 days later it did it again but with a one mile slow drive to work did not get that hot. I am assuming that I will have to replace the caliper but is there anything else I may have to change?
View 5 Replies
I have a 2011 F-150 4x4 5.0 with about 45k miles. When I drive at slow speeds (ex. 5mph) and turn the wheels left or right there is a rubbing/growling sound coming from sounds like the front end. It does it either in forward or reverse. It's not a squeaking, clicking, or metal on metal sound. It does not do it when the wheels are straight. I rolled underneath and couldn't see anything that stuck out right away. What could be causing this?
View 12 Replies
My dually has started to make a rubbing or grinding noise just about every time I make a turn, left or right. What this could be, truck has 8500 miles on it.
SD Dually
View 9 Replies
I lowered my car recently and it makes a wicked rubbing noise when I turn right at a decent speed, I've heard the axle rubs i guess what you'd call the seat of the strut in the front, is this the case? and if so, what can be done to correct this issue, because by no means am i that that low, I've seen much lower.
View 1 Replies
Hear a small pop in the cab when I am turning left pulled left wheel everything looks fine. Ball mount maybe, I don't want to tear into it at this point.
View 5 Replies
First I will start off by stating that my truck is a 2005 Ford F150 2WD Regular Cab 6.5 Bed, with the V6.
My problem is, when making a left turn at low speeds, I have a grinding noise that corrects itself upon straightening out the truck. This seems to happen on turns in the parking lots etc. It almost sounds like the tires are rubbing but the tires are the same BFG's that have been on the truck for 40,000 miles and have never rubbed. I am thinking it might be the power steering pump but am unsure. I do not have access to a lift right now but I have done the shake test on all of the suspension components and nothing seems out of place or loose.
View 14 Replies
'05 F150 5.4 Sounds like a whining noise from the front end when turning to the right or going straight. Goes away on left turns. Thought it was tire whine but put originals back on and got same thing. 13.5x35 verses 275 Truck has a Fabtech 6" lift. Right CV axle seems tight, rotor assembly replace 2k miles ago. Any other option before going into front diff?
View 2 Replies
I have a 2004 2WD supercab. And am hearing a 'clunking' sound when I turn almost full-lock. Below is a summary of what I have experienced so far:
- My truck used to be lowered 2" (below stock) at the front since new. Last month I lifted it (front and rear) and it now sits 2" above stock on new rancho shocks.
- I installed a camber kit and had the front aligned (toe and camber) after the above suspension work.
- The truck drove beautifully for two weeks until one day a 'clunking' sound was heard from the front-left every time I turned left. The alignment also changed as I had to now hold the steering very slightly to the left to drive straight.
- The alignment shop re-did the toe tracking (the camber did not change) and the truck drove great for about a day. Now I can hear the same clunking sound when I turn right and the tracking is again screwed up meaning I need to hold the steering very slightly to the right to drive straight.
What parts are playing up and what may need replacing?
View 2 Replies
I have an 08 F-150 5.4. When sitting still or moving, and turning the steering wheel to the right and only the right past center, there is a popping type noise somewhat like a screw driver down a washboard (for those who'll know what that is). I replaced the ball joints because I saw a slight amount of play, but the noise is still there.
View 12 Replies
I have an '04 V6 and everytime I turn the wheel to turn at low speed I get a sound and felling like the tires are skipping or scrubbing the ground. I have no weird wear or shakes and it tracks straight. What would cause this??
View 7 Replies
What are the largest size tires that will fit to give my truck a tougher look without rubbing or causing any other issues? Again I have a 2008 FX4 SuperCrew.
View 14 Replies
I have a 2013 Elantra. There is a rubbing type noise in the driver front when braking and turning right. It only rubs(catches) in one spot. Almost like a pulsation, however doesn't pulsate. Hard to describe. Has a new wheel bearing. There are new pads and rotors (two sets of rotors). Took to my Hyundai dealer today. They can't find anything visible. They said only option is to start adjusting/replacing parts as trial and error.
View 3 Replies
Im working on my buddies 2005 F150 FX4. In the midst of buttoning everything up and calling it a day I happen to see fluid dripping. The OEM steel brake line had been rubbing on the steering shaft and while doing the brakes, must of busted through all of the way.
I have been to Advance and Napa at least 4 times trying to match stuff up. Nothing works from either of them.
Called Ford and talked to a parts guy who lacked general automotive knowledge and finally had to pull up there diagram to show him the correct part. He told me that part is discontinued and cannot be ordered.
It is #2264 in this diagram.
2005 Ford F-150 Front Brake Hydraulic Hose | FordParts.com
I have the factory fittings and everything to make a new line. I cannot find tube that is 5.20mm or .20". Everything I find in a roll is either 3/16 or 6mm.
The fitting is a 12mmx1.00 on the ABS brain. The caliper hose appears to be a 3/8x24. A 10mmx1.00 which is standard metric 3/16 tube nut is to big for the OEM caliper hose. A standard 3/16 flare wont seat on the caliper hose.
So it seems like what Ford did here was.... a 12mmx1.00 on a 5.20mm tube to a 3/8x24 to a caliper hose that wont seat with out 5.20mm tube.
View 1 Replies
I gotta a roaring noise coming from my right front while turning. Planning on replacing just the wheel bearings tomorrow & not the whole hub assembly(2008 2wd). Is there a thread that lays out the steps and other parts I may need? I've seen alot different stories on the net on how to do it. Everthing from I can press new bearings to I have to do 4x4 hub conversion. Seems to be some confusion.
View 2 Replies
