Ford F-150 (2004-2008) :: Grinding Sound From The Front Driver Side Hub Area
Jun 6, 2016
About 3 months ago I started having a grinding sound from the front driver side hub area. I replaced it and it fixed the problem. I read where you should do both because he other one is soon behind it but I waited. Now I started hearing it from the passenger side too. So I replaced it today and all was good until I tested it from 4 wheel back to 2 wheel. Once I went back to 2 wheel the clicking that sounds like bearings going out to me, was back. What is it?
View 1 Replies
Advertisement
MY '07 SuperCab just started making a strange rhythmic sound as I drive. It is coming from the drivers side front wheel area. It is like a short creaking sound. It stays the same if I am turning the tires. Seems to go away if I put the brakes on hard, but I slow down so much I am not sure. Front CV Joint?
View 1 Replies
My 05 Supercrew 4X4 with 172k miles started making a horrible noise these last couple days. It sounds like its coming from the front passenger side area. The best I can describe is that it sounds like an electric tool motor with bad bearings. I'll be driving along at 45mph or above and every now and then I'll hear a really bad bearing squeal. It's bad enough that I can feel the extra friction caused by the squeal start to slow my truck down. It's vehicle speed related. I know what a bad wheel bearing sounds like and this is nothing like that. It's gotten bad enough I'm nervous to drive anywhere.
View 4 Replies
I have a 2004 F150, 5.4L V8. A few years back I was in an accident when someone slammed into the front of my truck. The right front wheel & tire took the brunt of the accident. I thought the repair shop had everything back to normal until recently I occasionally have a grinding sound coming from the right front side, seems to be related to the axle. It doesn't do it all the time just at random while I'm driving. The only solution I can find is to pull over or slow my speed to a crawl. Once I slow down enough or turn my wheel one way or the other its like something SLAMS back into place. I had it looked at by a local mechanic and they couldn't find anything wrong. Could it be something in my right front axle?
View 7 Replies
I have a clicking sound on the driver side front tire. It only makes the noise when I am in motion and have the wheel turned. It does it reverse and forward. The CV axle is not turning, and it does it with 4x4 engaged and the cv axle turning. I had the front end apart not to long ago replacing the IWE Integrated wheel hub, and the bearing isn't to terrible old, and its a timken.
It didn't wobble when the wheel was up in the air, and seemed solid. All the other front end pieces have also been replaced. I also hear a rubbing noise when I am driving on that side. For awhile before I replaced my IWE Hub I thought it was the cv axle just turning ( I had the lined unplugged so it was engaged to prevent damage), well after fixing the IWE Hub it still makes the sound and the cv axle is not turning as it was before.
Wondering if the bearing is maybe on its way out? One thing I did notice is tie rod end I just replaced along with all my new front end parts (upper control arms, and lower ball joints) the boot is severed completely all the way around. However the tie rod appeared to be in good shape, just the boot has been cut or split some how. Which I plan to fix, but I don't see how that would cause a clicking sound. I have inspected to make sure no lines or vac hoses are rubbing, and they are not.
View 13 Replies
I am getting a grinding sound from the left front wheel while driving straight.. The sound stays the same when brakes are applied and does not change when selecting 4wd or 2wd.. I pulled the wheel off and had a look, but saw nothing unusual.. What are the steps to diagnose/repair the issue? 2004 F-150 5.4 4x4
View 6 Replies
Alright so I'm having a problem with my 2003 Ford Explorer. I've recently noticed that when I get to above 40 mph, if my steering wheel is straight, I hear a loud kind of grinding or humming sound coming from my left driver side front. If I am going about 65 mph, it gets even louder and if I crank the steering wheel to the left, that's when it really gets noisy but as soon as I crank it to the right, the problems gone. When I do hear the hummin sound, I can feel it in the steering wheel. I have replaced al of the tires and it didn't work. Also, the car slightly pulls me to the right.
View 10 Replies
I've been having this ongoing clunk in the front of my 06 Avalon for about a month now. When I slightly hit the brake i'm getting almost a metal on metal clunk sound from right in front of the drivers side wheel area, or possibly on the other side wheel well area, and not sure if its related but a popping noise when i turn my wheel a certain way it seems.
Replaced:
Both CV axles
Both Rotors
Both transmission mount and engine mount (left and right side)
Dog Bone torque bar on top
Drivers side caliper
Control arms
Struts were replaced 6 months ago, and reused old mounts, so I took it out and replaced the strut mount with the bearing on passenger side only.
Control arms have been replaced 4 or 5 times in 6 months because they keep cracking, they are being installed correctly and still having the issue, they're slightly cracked right now (many tiny little rips in the rubber rear bushing of the front control arms) perhaps this is the problem and they're flexing too far? They're Dorman and ordered off of amazon. I have 2 replacement ones arriving tomorrow and will throw them in.
124k miles. I have had multiple shops look at it and cant figure it out, they said everything is tight. One shop said it was internal transmission.
View 6 Replies
I have a 2004 FX4 and have a very annoying rattle up in the driver's side dash area near the windshield. This happens every time it gets to be winter. The odd thing is, that it will sometimes go away but when I hit an uneven surface such as a railroad crossing, I hear a loud "pop" near that area. Then it will rattle non stop. I don't know if it is the wiper cowling area or what? IMO Ford's design of that area is crap.
View 11 Replies
I have a 2003 Impala. Over the past couple of months I have had an occurance every so often, very random with my front driver side brake. In both rain and dry conditions, braking hard and just slowing to break I will hear what sounds like grinding when I brake, like you do when the pads are gone. Well, I have had the car in and the pads and rotor are fine, the place I took it to even test drove it and tried but couldn't get the sound. I posted here a while back on this issue and the view was that it might be the ABS, but when this occurs the ABS light doesn't come on and the sound is just coming from the driver side front. What my next move should be?
View 7 Replies
Front driver side area making a flat tire noise. Replaced the tires and axle and wheel bearings. Kinda lost on what could btw making the noise. Alignment done 15k miles ago when lowering springs and new shocks were put on.
View 5 Replies
I was told it is my sway bar end link? My friend says it is probably my sway bar end links, not positive yet though! I just picked up my car Friday, so I'm new to the Lexus world, always wanted one of these cars.
View 4 Replies
I've got a 2008 santa fe limited 3.3 awd with about 170000 km on it. Lately when I brake I've been hearing a clicking noise coming from what sounds like the driver side front wheel area.
Had it in to my mechanic who checked the brakes and said that pads/calipers/rotors were all fine. They replaced the passenger side front bearing on the lower control arm a few weeks ago and said there is no play or noise coming from any other suspension components.
Where to look next? My mechanic isn't sure what it is so I was going to take it to the dealer and see if they can fix it. Also had new tires installed about a month ago
View 7 Replies
2005 ford f150 Fx4 So last Friday I started hearing a grinding noise from the passenger side front of my truck. sounded like metal on metal. So I started rooting around and noticed that bottom ball joints were shot. so replaced bottom ball joints on both side. I aslo replaced wheel bearing hub assembly on both sides, still heard the grinding. So I noticed that both axles were slinging grease, so I replaced them on both sides.
Still heard the grinding noise. So then I removed everything from the passenger side and noticed that the locking hub actuator was grinding both axle and the wheel bearing hub. So I just got done replacing that on the passenger side, put it all back together, and still grinding noise ringtones free. Also replaced the 4wd solenoid that they said gets water in it, and I replaced the check valve. And I put new Rotors and breaks. What it could be?
View 2 Replies
I noticed while driving my car there was a unusual rumble or grinding sound coming from my drivers side front wheel well. I get out and look I see a bunch of Fluid all over my wheel well. I look around turn my wheel around and see this fluids all on my rotors and suspension. Ive noticed couple weeks back the boots on the struts were ripped in two pieces from deteriorating or dry rotting (this was on both sides) and ive also been hearing some odd squeaking sound for over 15k miles every once in a while going over big bumps or train tracks. Struts go out at only 80k miles on their corolla? Yeah struts do usually lose their life around 60-80k miles but I've never seen them leak around that many miles. Is this a common issue?
View 5 Replies
At about 20k on my 07 I started hearing a faint whup whup whup between 35 and 50 mph's on the front driver's side area. At 60+ pretty quiet. It has gotten real loud at the present 30K. I suspected the tirers as I know the Integrities are complete junk but as a test I did a rotation and exact same noise.
I thought thats not good but found it hard to believe something else was bad as I had no vibration and no pull whatsoever in steering. Long story short I bought a new set of tires Kumho KR21's at stock size and oh crap exact same noise.
View 10 Replies
I owned a 99 f250 a little while ago. Just bought a 2006 crewcab F150 xlt about 2 months ago, and for the past month there has been this unusual grinding or whirring like noise coming from the front passenger side wheel.
I took it to the mechanic and he found a bad wheel bearing on drivers side and replaced it but that wasn't the issue. He could hear the noise but wasn't able to figure out what the actual issue was.
The noise only happens when my foot is on the throttle. (not when coasting) and i also just discovered that it doesn't make any noise at all when put in 4x4.
View 4 Replies
Every time I go over a speed bump, I hear a very noticeable grinding noise as the tire goes up it sounds grindy and as it goes down it sounds grindy front driver side area. Took it to a dealer and they said there is no problem. Therefore, should I just forget about it until there is a problem? It doesn't affect function, but I do hear it going over speed bumps and not regular shallow bumps.
View 4 Replies
How to stop a squeaking front shock. It's my drivers side front shock only. The shocks are fine as far as wear and ride, it's just this squeaking (very noticeable in parking lots) that's about to drive me crazy!!
View 14 Replies
I have an 07 f150 base model truck, manual 4x4 no push button. It seems something is binding in the hub once in awhile. I am driving down the road and all of a sudden i hear a loud squealing from the front drivers side. I slow down and then something seems to engage when I am almost stopped. I did a little research and have come up with the actuator might be bad. I just don't wanna throw parts at it that it don't need. Here's a lil more info. Last winter I put it in 4 wheel drive and the passenger side was making the same noise with the 4x4 not working when I hit the gas. I am thinking actuators need replacing on both sides.
View 5 Replies
2008 2wd 4.6L 98K miles F150 for the past few weeks has been humming with a rhythmic vibration which feels like it is coming from driver's side front wheel. It doesn't do it constantly, nor at all speeds. Once I hit about 25mph, you can start to hear a humming. At 35, slight vibration. Between 50-60, heavier vibration. Sometimes at 65+, it subsides quite a bit. Both front rotor assemblies are newer, and I put in a brand new left because I thought it was a bad bearing.
View 5 Replies
