Ford F-150 (2004-2008) :: Fx4 Won't Turn Over - Starter Relay Only Clicks?
Mar 28, 2015
I have a 2004 f150 fx4. Drove it home and parked it. Next morning wouldn't turn over. When trying to start the starter relay clicks but no noise from starter. Battery light and wrench light are on. I thought maybe battery was low but when I hooked up charger gauge showed good battery. What do I do next? Also there is no "theft" light...at all not even when I first turn key on.
View 1 Replies
Advertisement
I have 2003 Saturn Ion that will not start. I did test on the starter and battery and everything work fine. When I turn the key to start, the starter relay clicks alright but there is no power going through the starter trigger wire to engage the starter; I have checked the starter trigger wire, all the fuses, and all the relays, but there is no power in the trigger wire. Why there is no power in the starter trigger wire when the key is turned to start to engage the starter so that the car will start.
View 10 Replies
My starter clicks once when i turn the key, yet when i brought it in to have it tested it passed twice. I took one of the spark plugs out and pulled on the belt thinking maybe some antifreeze got in a cylinder and saw the piston moving up and down so i its not seized.
View 1 Replies
The turn signal lights in my brother's 2000 passat are staying lit when he turns the signals on. They work sometimes, for a few clicks, but then stop working.
1. is it the turn signal relay. It sounds like its in the middle of the dash.
2. how do you get to that relay?
Have to remove the HVAC controls? if so, how the heck do you do it?
[URL] ....
View 4 Replies
I have a 2000 Chevy S10 (4-cylinder, rear wheel drive, the most basic model). A few months ago, the truck wouldn't start. The starter clicked a single time when I turned the key, and the lights on the radio came on, but nothing else happened. Several hours later, I attempted to start the truck again, and it started just fine. I disconnected the battery and found some corrosion on the positive connection (not that bad), and I assumed it was because of a bad connection.
I cleaned it and haven't had any problems since....until last night. The truck once again wouldn't start at a gas station. One click from the starter but nothing else happened. I cleaned out the battery connection again, and the positive terminal was again slightly corroded, but it wasn't that bad. The truck started after I cleaned out the connection and it got me home, but wouldn't start again after I shut it off. Can a bad battery cause repeated corrosion or possibly be the problem? I'm hoping it's just the battery, but I don't want to get a new one until I'm sure...
View 6 Replies
It's a no crank, no start issue. Battery is only a few months old and tests fine (800CCA,) starter is only 2 months old and we've pulled it out a couple times to have it tested and it's fine. Positive and negative battery cables are also fairly new (last spring.) I've tested pretty much every fuse and relay in the truck that had to do with the starter, etc. My brother has tested the resistance on most of the cables and wires (battery cables, alternator, starter, etc.) Anti-Theft has been tested as well.
Now, here's the odd part. When the key is turned, the starter clicks, but it doesn't turn the engine... at all. About the only thing I haven't tested is to see if the engine is locked up (which would really, really suck.) Now, this is an L76, 6.0L engine. It has D.O.D and variable valve timing, so the issues may be different than the 5.3 or 4.8.
View 13 Replies
I have an 02 F250 6.8 with 51,000 miles on it. I recently replaced the battery about a week ago, and only actually drove it yesterday for the first time since replacing the battery. I drove it about 25 miles, parked, and when I went to restart, it wouldn't. The starter doesn't crank, so I mean its not a cranking issue as in cranking, and not starting. It only clicks at the relay when turning the key. It acts like when you try to use a wrong chip coded key.
All of the dash lights came on, and I can hear the relay clicking, but that's it. I swapped the relays around, and no luck. If I let it sit a while, about an hour, it will fire right up. The battery cables are tight and free of corrosion. I am curious, since I just put in a new battery, could this be the culprit? Why will it start fine cold, but not hot? I have NEVER had an issue with this truck until now.
View 14 Replies
My parents have an 07 f150 with remote start and for some reason it will not work, it locks the doors and turns the key on but it doesnt turn the engine over, we brought it to a local dealership and they just unplugged it and plugged it back in and it started working... but later down the road, like 150 kilometers my mom got out to go shopping and it wouldn't work again, does this mean the whole module has to be replaced or is there a quick fix to this, it looks like the stock ford remote start but it has a separate keychain for the button, if it has to be fixed, any instructions on how to do it?
View 3 Replies
I have a 2006 F150 STX auto trans with the 4.2L V6 that has been having intermittent starting problems. It has 98,000 miles on it. It will start fine 99% of the time but sometimes when I turn the key the starter will grind once or twice then it can go a few weeks with out doing it at all. Then also sometimes it will crank turning over for several seconds but wont start. Then it starts fine the rest of the time. This has happened several times but only happens once every few weeks or so. Just trying to see if it needs a new starter or if its something else. It has a new battery.
View 3 Replies
My accent won't start anymore. When I turn the key, I hear a series of clicks, but the car won't start. When I put the key in the ignition, lights/radio/wipers all work fine. It's a 2008 manual car.
View 3 Replies
I have a 2004 F150 SCrew 4x4 with the 4.6 (260K)... My steering wheel occasionally 'clicks' when turning - It sounds and feels like a bearing is bad in the steering column.
When it happens, it feels like one in the bearing is binding- the steering wheel slightly binds, then there's a 'pop' like the ball snapped back into place. This only happens occasionally. Sometimes it will pop with every revolution of the steering wheel, other times not at all.
Originally, I thought it was a U-joint, but it seems like the noise is coming from the bottom of the column...
View 1 Replies
Without key even in ignition, fuel pump relay clicks constantly every 8 seconds with the gauge lights illuminating during this 8 seconds. The only lights that function are the gauge lights. Upon turning on the headlight switch only the gauge lights illumin8. Absolutely no headlights, dome light or brake lights. No fuel pump sense/pulse. No radio, key on or in accessories.
Multi-function switch was not the issue. How would I troubleshoot this one?
View 3 Replies
I have myself changed the oil and filter in my Accent 2013 for the 1st time; after the change everything looked fine, no alarm lights, oil level is OK, no leakages, etc.
However. when I turn off the car I hear beeps coming from the engine, I hear relay clicks and after some seconds the sounds disappear.
When I had the oil changed at an oil shop, this didn't happen. Again, I see no alarms on the driver panel.
View 10 Replies
I have a 2004 Excursion with the 6.0 diesel 189k kilometers. Had an egregious delete done about 3 weeks ago. A couple of nights ago the temperature was about 10 degrees f and Whalen I started her it sounded like electrical arcing or grinding. She started and off I went. The next morning it was 0 f went to start and made the same noise and then just stopped cranking. Now when I turn to start I get nothing except the relay click under dash. I tried jumping the solenoid and got nothing. Someone told me that my ground connection might be off the starter. Problem is I can't seem to get at the starter.
View 3 Replies
I cant find the location of the Turn signal relay, its not in the Relay box under the hood nor is it on the fuse panel under the dash, i'm planning on installing LED blinkers and i want to switch out the relay to a LED compatible one, where it is?
2008 Santa Fe GLS ....
View 8 Replies
My horn suddenly stays on when I hit the horn and it doesn't beep when I lock the door with the key fob. Only way to turn it off is to shut off the truck. I thought it may be a faulty horn relay. I've asked many mechanics where the horn relay is located and every one gives a different answer. Under the hood, in the driver side kick panel, under the dash, near the horn itself. Where the horn relay is located on a 2004 F-150....
View 1 Replies
02 2.4 IL4 2AZ-FE Camry will not start, starter clicks once and car is dead, even no radio.
Took battery to automotive store and it tested bad. I still asked them to charge it, let it set overnight and test it again when I pick it up. It tested 100%.
Put battery into car, started car and drove it to automotive store to test charging circuit and battery with car running. Checked 100% good.
Car would not start, again, starter clicks once and car is dead, even no radio. Took battery to automotive store and it tested bad. Replaced battery. Car started twice and again, starter clicks once and car is dead, even no radio.
View 5 Replies
I have a 2001 Accent with a 1.6L engine. My son drove it yesterday with no problem. This morning when he tried to start it we would get a click from the starter when he turned the key and that's all. Tried jumping it. That didn't work. So I jumped to conclusions and replaced the starter. I have the same problem. Click.
I have taken the old starter and the battery to AutoZone and had them both tested. They both work fine. (They'll let me return the new starter if I want to remove it). I've cleaned the battery terminals and cable clamps. I still get the same click. What I did notice tonight after all of this is that when I turn the key the cable end/terminal clamp on the positive terminal SMOKES!
View 16 Replies
I've bought new starter cleaned starter contacts battery contacts jumped it bypassed the ignition and relay but taking a wire and touching the positive to the signal wire..used jumper cables as a direct ground to to the starter the torque converter spins so it's not seased...I don't understand what could possibly be stopping this thing...it's just one click like the starter is jumping out but not enough power to turn... 2002 Jetta 1.8t auto
View 18 Replies
Starter clicks wont crank...
View 2 Replies
I got a 97 f150 single cab short bed. My 4x4 shifter is on the floor and moves. I put in 4x4 and the relay clicks and the light comes on. Same as 4low. Front driveshaft spins but front wheels don't. Could there be a leak in the auto locking hubs? Also I want to manual convert the auto hubs. It can be done but how?
View 1 Replies